emcomm-tools-os-community/overlay/opt/emcomm-tools/bin/et-audio

#!/bin/bash
#
# Author  : Gaston Gonzalez
# Date    : 31 October 2024
# Updated : 9 October 2025
# Purpose : Configures ET audio device with sane defaults
#
# Preconditions
# 1. Supported audio interface is connected and properly detected
#
# Postconditions
# 1. ALSA settings set on ET audio device
. /opt/emcomm-tools/bin/et-common

usage() {
  echo "usage: $(basename $0) <command>"
  echo "  update-config   - Update amixer config"
}

if [ $# -ne 1 ]; then
  usage
  exit 1
fi

start() {
  update-config
}

update-config () {

  # 1. Check if the symlink was created by the udev rules
  if [ -e /dev/et-audio ]; then

     # 2. Check that this device was properly tagged with the ET_AUDIO env variable with a udev rule
     APLAY_OUT=$(arecord -l | grep ET_AUDIO)
     if [ $? -eq 0 ]; then

       # Use device descriptor assigned by udev rules
       ET_DEVICE=$(udevadm info /dev/et-audio | grep ET_DEVICE)
       if [ $? -ne 0 ]; then
         et-log "ET_DEVICE not set by udev rule. Can't set ALSA settings"
         exit 1
       fi

       ET_DEVICE_NAME=$(udevadm info /dev/et-audio | grep ET_DEVICE | cut -d"=" -f2)
       AUDIO_CARD=$(echo $APLAY_OUT | cut -d":" -f1 | awk '{print $2}')
       AUDIO_DEVICE=$(echo $APLAY_OUT | cut -d"," -f2 | cut -d":" -f1 | awk '{print $2}')
       FULL_AUDIO_DEVICE="$AUDIO_CARD,$AUDIO_DEVICE"

       et-log "Updating audio device: '${ET_DEVICE_NAME}' (${FULL_AUDIO_DEVICE})' for ALSA PnP configuration."

       # Handle audio settings specifically if defined in the radio configuration
       AUDIO_INIT_SCRIPT=$(jq -r -e '.audio.script' ${ET_ACTIVE_RADIO_CONF})
       if [[ $? -eq 0 ]]; then
         et-log "Executing audio configuration script: ${AUDIO_INIT_SCRIPT}"

	 CMD="${AUDIO_INIT_SCRIPT} ${AUDIO_CARD} ${AUDIO_DEVICE}"
	 et-log "Running command: ${CMD}"
	 ${CMD}

	 if [[ $? -ne 0 ]]; then
	   et-log "Audio init script ${AUDIO_INIT_SCRIPT} failed. Can't start application."
	   notify-user "Audio init script failed. Can't start application."
	   exit 1
	 fi
	 
	 exit 0
       fi

       # Handle audio generically for most sound card interfaces
       case ${ET_DEVICE_NAME} in
         "DIGIRIG_MOBILE")
           # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
           # Unmute Mic
           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
         ;;
         "DIGIRIG_LITE")
           # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
           # Unmute Mic
           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
         ;;
         "FT-891")
           # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
           # Unmute Mic
           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
         ;;
         "FTX-1")
           # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
           # Unmute Mic
           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
         ;;
         "FX-4CR")
           # Unmute the PCM and set the volume to 21% to get the full output power. This value is
           # dependent on the settings defined for the FX-4CR in the et-radio notes. 
	   amixer -q -c ${AUDIO_CARD} sset 'PCM' 31% unmute

           # Set "L/R Capture" to 55%. Adjust if you can't decode received audio.
	   amixer -q -c ${AUDIO_CARD} sset 'Mic' 67% unmute

           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
	   ;;
         "X6100")
           # Unmute Speaker a set volume. Adjust if remote station can't decode you.
           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
           # Unmute Mic
           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. 
           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
           # Disable Auto Gain Control
           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute

           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
         ;;
         *)
           et-log "No ALSA configuration specified for this ET_DEVICE."
         ;;
       esac

     else
       et-log "No ET_AUDIO device detected. Can't change ALSA settings."
       exit 1
     fi
  else
    et-log "No ET_AUDIO device plugged in. Can't change ALSA settings."
    exit 1
  fi
}

case $1 in
  start)
    start
    ;;
  update-config)
    update-config
    ;;
  *)
    echo "Invalid command."
    usage
    exit 1
  ;;
esac