linbpq - Initial configuration file and wrapper script. This is WiP.

2026-09-17 15:41:44 -04:00 · 2024-11-08 06:11:54 -07:00
parent 569b193ddf
commit 02ab7e7545
2 changed files with 126 additions and 0 deletions
@@ -0,0 +1,58 @@
+SIMPLE
+LOCATOR={{ET_GRID}}
+NODECALL={{ET_CALLSIGN}}-4
+
+CTEXT:
+Welcome to the {{ET_CALLSIGN}}-4 LinBPQ Node.
+***
+
+FULL_CTEXT=0
+
+BTEXT:
+!3742.65N/08553.17W#{{ET_CALLSIGN}} LinBPQ on EmComm Tools.
+***
+
+IDMSG:
+TMH LinBPQ Node {{ET_CALLSIGN}}-4
+***
+
+INFOMSG:
+Sysop {{ET_CALLSIGN}}
+***
+
+MAPCOMMENT=EmComm Tools LinBPQ Node
+
+IDINTERVAL=15
+BTINTERVAL=15
+NODESINTERVAL=25
+
+PORT
+ PORTNUM=1                ; Optional but sets port number if stated
+ ID=BPQ 145.710MHZ        ; Displayed by PORTS command
+ TYPE=ASYNC               ; Port is RS232 Com
+ PROTOCOL=KISS            ; TNC is used in KISS,or BPQKISS mode
+ IPADDR=127.0.0.1
+ TCPPORT=8001	
+ CHANNEL=A                ; A single channel TNC, A or B for multichannel
+ NOKEEPALIVES=0
+ PERSIST=160              ; PERSIST=256/(# of transmitters-1)
+ SLOTTIME=180             ; CMSA interval timer in milliseconds
+ TXDELAY=270              ; Transmit keyup delay in milliseconds
+ TXTAIL=23                ; TX key down, in milliseconds, at packet end
+ QUALITY=203              ; Quality factor applied to node broadcasts
+ MINQUAL=201              ; Entries in the nodes table with qualities
+                          ; greater or equal to MINQUAL will be sent on
+                          ; this port. A value of 0 sends everything.
+ MAXFRAME=6               ; Max outstanding frames (1 thru 7)
+ FRACK=5000               ; Level 2 timout in milliseconds
+ RESPTIME=1000            ; Level 2 delayed ack timer in milliseconds
+ RETRIES=100              ; Level 2 maximum retry value
+ PACLEN=236               ; Default max packet length for this port
+ UNPROTO={{ET_CALLSIGN}}-4; BTEXT broadcast addrs format:
+                          ; DEST[,digi1[,digi2]]
+ BCALL={{ET_CALLSIGN}}-4  ; BTEXT call. unstated defaults to APPL1CALL
+ L3ONLY=0                 ; 1=No user downlink connects on this port
+ DIGIFLAG=1               ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
+ DIGIPORT=0               ; Port on which to send digi'd frames
+ USERS=0                  ; Maximum number of L2 sessions, 0 = no limit
+ENDPORT