diff --git a/overlay/etc/skel/notes/bbs-admin.md b/overlay/etc/skel/notes/bbs-admin.md
new file mode 100644
index 0000000..eaf9ff1
--- /dev/null
+++ b/overlay/etc/skel/notes/bbs-admin.md
@@ -0,0 +1,17 @@
+# BBS Admin
+
+## Logging in as the System Operator (SysOp)
+
+To access the BBS as an administrator (also called the sysop), perform 
+the following:
+
+1. Launch the Min web browser.
+
+2. Visit http://localhost:8012.
+
+3. Click on "SYSOP Signin".
+
+4. For the user use: `admin`
+
+5. For the password use: your Winlink password that you set with 
+   `et-user`.
diff --git a/overlay/etc/skel/notes/OFFLINE_SITES.md b/overlay/etc/skel/notes/offline-sites.md
similarity index 100%
rename from overlay/etc/skel/notes/OFFLINE_SITES.md
rename to overlay/etc/skel/notes/offline-sites.md
diff --git a/overlay/opt/emcomm-tools/bin/et-bbs-server b/overlay/opt/emcomm-tools/bin/et-bbs-server
new file mode 100755
index 0000000..05abd25
--- /dev/null
+++ b/overlay/opt/emcomm-tools/bin/et-bbs-server
@@ -0,0 +1,90 @@
+#!/bin/bash
+#
+# Author  : Gaston Gonzalez
+# Date    : 25 March 2025
+# Purpose : Wrapper script for starting the BBS with PnP support
+#
+# Preconditions:
+# 1. Supported radio and audio interface are connected and properly detected
+#
+# Postconditions:
+# 1. Dire Wolf is started in 1200 baud packet mode
+# 2. LinBPQ is started
+source /opt/emcomm-tools/bin/et-common
+
+BBS_CONF_DIR=${HOME}/.local/share/emcomm-tools/bbs-server
+BBS_CONF_FILE=${BBS_CONF_DIR}/bpq32.cfg
+BBS_CONF_FILE_TEMPLATE=/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.cfg
+
+usage() {
+  echo "usage: $(basename $0) <command>"
+  echo "  <command>"
+  echo "    start           - Start BBS"
+  echo "    update-config   - Update configuration"
+}
+
+if [[ $# -ne 1 ]]; then
+  usage
+  exit 1
+fi
+
+start() {
+  update-config
+  
+  if [[ $? -eq 0 ]]; then
+
+    PS_OUT=$(ps -ef | grep [d]irewolf)
+    if [[ $? -ne 0 ]]; then
+      echo -e "${RED}Can't start BBS. Dire Wolf not running.${NC}"
+      exit 1
+    fi
+
+    CWD_DIR=$(pwd)
+
+    cd ${BBS_CONF_DIR}
+    CMD="linbpq"
+    et-log "Starting LinBPQ in ${BBS_CONF_DIR} with: ${CMD}"
+
+    ${CMD}
+
+    cd ${CWD_DIR}
+
+  else 
+    et-log "Error updating configuration. Can't start BBS"
+    exit 1
+  fi
+}
+
+update-config () {
+
+    [ -z "$ET_USER_CONFIG" ] && ET_USER_CONFIG="${HOME}/.config/emcomm-tools/user.json"
+
+    CALLSIGN=$(cat ${ET_USER_CONFIG} | jq -r .callsign)
+    GRID=$(cat ${ET_USER_CONFIG} | jq -r .grid)
+    WINLINK_PASSWD=$(cat ${ET_USER_CONFIG} | jq -r .winlinkPasswd)
+
+    if [[ "${CALLSIGN}" = "N0CALL" ]]; then
+      echo -e "${RED}Can't start BBS. No callsign set. Run: ${WHITE}et-user${NC}."
+      exit 1
+    fi
+
+    echo "Updating BBS configuration: ${BBS_CONF_FILE}..."
+    cp -v ${BBS_CONF_FILE_TEMPLATE} ${BBS_CONF_FILE}
+    sed -i "s|{{ET_CALLSIGN}}|${CALLSIGN}|g" ${BBS_CONF_FILE}
+    sed -i "s|{{ET_WINLINK_PASSWD}}|${WINLINK_PASSWD}|g" ${BBS_CONF_FILE}
+    sed -i "s|{{ET_GRID}}|${GRID}|g" ${BBS_CONF_FILE}
+}
+
+case $1 in
+  start)
+    start
+    ;;
+  update-config)
+    update-config
+    ;;
+  *)
+    echo "Invalid command."
+    usage
+    exit 1
+  ;;
+esac
diff --git a/overlay/opt/emcomm-tools/bin/et-mode b/overlay/opt/emcomm-tools/bin/et-mode
index aaf735b..762ed3d 100755
--- a/overlay/opt/emcomm-tools/bin/et-mode
+++ b/overlay/opt/emcomm-tools/bin/et-mode
@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 6 November 2024
-# Updated  : 18 March 2025
+# Updated  : 25 March 2025
 # Purpose  : Configures the system for a specific mode of operation
 
 # Use a simple text file to save the state of the last mode selected
@@ -16,6 +16,7 @@ MODE_ID_APRS_DIGIPEATER="aprs-digipeater"
 MODE_ID_APRS_CLIENT="aprs-client" 
 MODE_ID_BBS_CLIENT="bbs-client" 
 MODE_ID_BBS_CLIENT2="bbs-client2" 
+MODE_ID_BBS_SERVER="bbs-server" 
 MODE_ID_CHAT_CLIENT="chat-chattervox" 
 MODE_ID_PACKET_DIGIPEATER="packet-digipeater" 
 MODE_ID_WINLINK_ARDOP="winlink-ardop" 
@@ -133,6 +134,7 @@ options+=("${MODE_ID_NONE}" "No mode selected")
 options+=("${MODE_ID_APRS_CLIENT}" "APRS Client (YAAC)")
 options+=("${MODE_ID_BBS_CLIENT}" "BBS Client (Paracon)")
 options+=("${MODE_ID_BBS_CLIENT2}" "BBS Client (QtTermTCP)")
+options+=("${MODE_ID_BBS_SERVER}" "BBS Server (LinBPQ)")
 options+=("${MODE_ID_CHAT_CLIENT}" "Chat (chattervox)")
 options+=("${MODE_ID_APRS_DIGIPEATER}" "APRS Digipeater")
 options+=("${MODE_ID_PACKET_DIGIPEATER}" "Packet Digipeater")
@@ -220,6 +222,11 @@ if [ $exit_status -eq 0 ]; then
       et-log "Starting QtTermTCP."
       et-qttermtcp start
     ;;
+    ${MODE_ID_BBS_SERVER})
+      start_and_wait_for_service et-service-direwolf-simple
+      et-log "Starting BBS server."
+      et-bbs-server start
+    ;;
     ${MODE_ID_CHAT_CLIENT})
       start_and_wait_for_service et-service-direwolf-simple
       et-log "Starting chattervox"
diff --git a/overlay/opt/emcomm-tools/bin/et-system-info b/overlay/opt/emcomm-tools/bin/et-system-info
index 529de30..416c79d 100755
--- a/overlay/opt/emcomm-tools/bin/et-system-info
+++ b/overlay/opt/emcomm-tools/bin/et-system-info
@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 6 October 2024
-# Updated  : 7 February 2025
+# Updated  : 25 March 2025
 # Purpose  : Utility script for dumping system information
 
 function usage() {
@@ -178,6 +178,7 @@ case $1 in
     MODE_ID_APRS_DIGIPEATER="aprs-digipeater"
     MODE_ID_BBS_CLIENT="bbs-client"
     MODE_ID_BBS_CLIENT2="bbs-client2"
+    MODE_ID_BBS_SERVER="bbs-server"
     MODE_ID_CHAT_CLIENT="chat-chattervox"
     MODE_ID_PACKET_DIGIPEATER="packet-digipeater"
     MODE_ID_APRS_CLIENT="aprs-client"
@@ -208,6 +209,9 @@ case $1 in
       ${MODE_ID_BBS_CLIENT2})
         echo "BBS Client"
       ;;
+      ${MODE_ID_BBS_SERVER})
+        echo "BBS Server"
+      ;;
       ${MODE_ID_CHAT_CLIENT})
         echo "Chat (chattervox)"
       ;;
diff --git a/overlay/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.cfg b/overlay/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.cfg
new file mode 100644
index 0000000..6eef1f7
--- /dev/null
+++ b/overlay/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.cfg
@@ -0,0 +1,105 @@
+SIMPLE
+LOCATOR={{ET_GRID}}
+NODECALL={{ET_CALLSIGN}}-7
+NODEALIAS=ETCNDE
+
+CTEXT:
+ _____ _____ ____ ____  ____ ____  
+| ____|_   _/ ___| __ )| __ ) ___| 
+|  _|   | || |   |  _ \|  _ \___ \ 
+| |___  | || |___| |_) | |_) |__) |
+|_____| |_| \____|____/|____/____/ 
+
+Command  Description
+?        Show help
+BBS      Connect to BBS
+CHAT     Chat with other users
+INFO     Contact information
+***
+
+FULL_CTEXT=1
+
+BTEXT:
+{{ET_CALLSIGN}} ETC BPQ node
+***
+
+BTINTERVAL=15
+
+IDMSG:
+{{ET_CALLSIGN}}-7 Network node (ETC BPQ)
+***
+
+INFOMSG:
+Welcome to the ETC BPQ node in {{ET_GRID}}.
+
+To leave me a message.
+
+1. Access the BBS by typing: bbs
+2. Send a private message to me by typing: sp {{ET_CALLSIGN}}
+3. Enter a title for the message when prompted, then press [ENTER].
+4. Type your message one line at a time. Press [ENTER] after each line.
+5. When done, type the following on its own line: /ex
+6. Press [ENTER]
+***
+
+MAPCOMMENT={{ET_CALLSIGN}} ETC BPQ Node
+
+IDINTERVAL=15
+NODESINTERVAL=25
+
+PORT
+  PORTNUM=1
+  ID=1200 baud packet
+  TYPE=ASYNC
+  PROTOCOL=KISS            ; Use KISS for the 1200 baud packet port
+  IPADDR=127.0.0.1         ; Connect to direwolf on this host
+  TCPPORT=8001	           ; Connect to direwolf on the KISS TCP port
+  CHANNEL=A                ; single channel TNC
+  NOKEEPALIVES=0
+  PERSIST=160
+  SLOTTIME=180
+  TXDELAY=270              ; The TX delay in milliseconds
+  TXTAIL=23                ; The TX tail delay in millisconds
+  QUALITY=203              ; Quality factor applied to node broadcasts
+  MINQUAL=201              ; Entries in the nodes table with qualities
+                           ; greater or equal to MINQUAL will be sent on
+                           ; this port. A value of 0 sends everything.
+  MAXFRAME=6               ; Max outstanding frames (1 thru 7)
+  FRACK=5000               ; Level 2 timout in milliseconds
+  RESPTIME=1000            ; Level 2 delayed ack timer in milliseconds
+  RETRIES=100              ; Level 2 maximum retry value
+  PACLEN=236               ; Default max packet length for this port
+  UNPROTO=FBB              ; BTEXT broadcast addrs format:
+                           ; DEST[,digi1[,digi2]]
+  L3ONLY=0                 ; 1=No user downlink connects on this port
+  DIGIFLAG=1               ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
+  DIGIPORT=0               ; Port on which to send digi'd frames
+  USERS=0                  ; Maximum number of L2 sessions, 0 = no limit
+ENDPORT
+
+PORT
+  PORTNUM=2
+  ID=Telnet
+  DRIVER=Telnet
+  QUALITY=0
+  CONFIG
+  CMS=1
+  CMSCALL={{ET_CALLSIGN}}
+  CMSPASS=
+  RELAYAPPL=BBS
+  SECURETELNET=1
+  LOGGING=1
+  DisconnectOnClose=0
+  TCPPORT=8010
+  HTTPPORT=8012
+  LOGINPROMPT=user:
+  PASSWORDPROMPT=password:
+  MAXSESSIONS=15
+  CTEXT=Welcome to {{ET_CALLSIGN}}'s Telnet Server\nEnter ? for list of commands\n\n
+  USER=admin,{{ET_WINLINK_PASSWD}},{{ET_CALLSIGN}},"",sysop
+ENDPORT
+
+APPLICATION 1,BBS,,{{ET_CALLSIGN}}-11,ETCBBS,255
+APPLICATION 2,CHAT,,{{ET_CALLSIGN}}-12,ETCCHT,255
+LINMAIL
+LINCHAT
diff --git a/scripts/install-bbs-server.sh b/scripts/install-bbs-server.sh
index d1d0a25..d39c68e 100755
--- a/scripts/install-bbs-server.sh
+++ b/scripts/install-bbs-server.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 # Author  : Gaston Gonzalez
 # Date    : 8 November 2024
-# Updated : 28 November 2024
+# Updated : 26 March 2025
 # Purpose : Install Linbpq
 #
 # Notes:
@@ -19,6 +19,36 @@ apt install ucspi-tcp -y
 
 et-log "Installing Linbpq..."
 
+# Install the web interface for LinBPQ
+HTML_ZIP_FILE=HTMLPages.zip
+HTML_ZIP_URL="http://www.cantab.net/users/john.wiseman/Downloads/Beta/${HTML_ZIP_FILE}"
+BBS_HOME="/etc/skel/.local/share/emcomm-tools/bbs-server"
+BBS_HOME_FILES="${BBS_HOME}/Files"
+
+et-log "Downloading web interface for LinBPQ from ${HTML_ZIP_URL}"
+curl -s -f -L -o ${HTML_ZIP_FILE} ${HTML_ZIP_URL}
+
+if [[ $? -eq 0 ]]; then
+
+   CWD_DIR=$(pwd)
+
+   et-log "Installing web interface under ${BBS_HOME}"
+
+   [[ ! -e ${BBS_HOME_FILES} ]] && mkdir -p ${BBS_HOME_FILES}
+   mv ${HTML_ZIP_FILE} ${BBS_HOME} && cd ${BBS_HOME} && unzip ${HTML_ZIP_FILE}
+
+   cd ${CWD_DIR}
+
+   if [[ -e "${BBS_HOME}/index.htmlx" ]]; then
+     et-log "Web interface installation successful"
+   else
+     et-log "Web interface installation failed"
+   fi
+else
+   et-log "Unable install web interface for LinBPQ"
+fi
+
+# Install Linbpq
 et-log "Installing 32-bit dependencies for Linbpq..."
 dpkg --add-architecture i386 &&  apt update && apt install \
   libpcap0.8-dev:i386 \
@@ -45,3 +75,4 @@ ln -s ${INSTALL_DIR} ${LINK_PATH}
 stow -v -d /opt linbpq -t /usr/local
 
 cd ${CWD_DIR}
+