Bluetooth - Removed failed prototype around a dedicated Bluetooth mode switcher

overlay/opt/emcomm-tools/bin/et-mode-bt

@@ -1,128 +0,0 @@
-#!/bin/bash
-#
-# Author   : Gaston Gonzalez
-# Date     : 10 March 2024
-# Purpose  : Launches a mode using a connected Bluetooth TNC
-source /opt/emcomm-tools/bin/et-common
-
-# Use a simple text file to save the state of the last mode selected
-MODE_STATUS_FILE="${HOME}/.config/emcomm-tools/et-mode"
-
-QTTERMTCP_CONF_FILE="${HOME}/.config/QtTermTCP.ini"
-
-# List of supported modes of operation
-MODE_ID_NONE="none"
-MODE_ID_BBS_CLIENT2="bbs-client2" 
-MODE_ID_WINLINK_PACKET="winlink-packet" 
-
-BLUETOOTH_TNC_CHECK=$(ps -ef | grep "[r]fcomm connect")
-if [[ $? -ne 0 ]]; then
-  et-log "No Bluetooth TNC configured."
-  exit 1
-fi
-
-# Attempt to stop all EmComm Tools services regardless if they are running.
-stop_all_services() {
-  et-kill-all 
-}
-
-exit_on_service_failure() {
-  local systemd_unit_name="$1"
-  systemctl is-active --user --quiet "${systemd_unit_name}"
-  if [ $? -ne 0 ]; then
-    et-log "Can't start mode. ${systemd_unit_name} failed to start."
-    exit 1
-  fi
-}
-
-TIMEOUT=15  # Total time to wait in seconds
-INTERVAL=2  # Interval between checks in seconds
-
-start_and_wait_for_service() {
-  local systemd_unit_name="$1"
-  local elapsed=0
-
-  et-log "Starting ${systemd_unit_name}..."
-  systemctl --user start ${systemd_unit_name}
-
-  et-log "Waiting for ${systemd_unit_name} to become active..."
-
-  while ! systemctl is-active --user --quiet "${systemd_unit_name}"; do
-      sleep "$INTERVAL"
-      elapsed=$((elapsed + INTERVAL))
-      if [ "$elapsed" -ge "$TIMEOUT" ]; then
-          et-log "Timeout reached. ${systemd_unit_name} failed to start."
-          exit 1
-      fi
-      et-log "Waiting for ${systemd_unit_name} to become active..."
-  done
-
-  # Some applications even when started still need a bit of extra time to be available. 
-  # Add a short think time of 2 seconds. The ARDOP modem requies extra time.
-  sleep 2
-
-  # Do one more check to ensure that we are running, otherwise exit.
-  exit_on_service_failure ${systemd_unit_name}
-}
-
-# Build list of options
-options=()
-options+=("${MODE_ID_NONE}" "No mode selected")
-options+=("${MODE_ID_BBS_CLIENT2}" "BBS Client (QtTermTCP)")
-options+=("${MODE_ID_WINLINK_PACKET}" "Winlink over VHF/UHF (AX.25 Packet)")
-
-# Prompt user for option and save exit status
-SELECTED_MODE=$(dialog --clear --menu "Select a mode:" 0 0 0 "${options[@]}" 3>&1 1>&2 2>&3)
-exit_status=$?
-
-tput sgr 0 && clear
-
-if [ $exit_status -eq 0 ]; then
-
-  stop_all_services
-
-  echo ${SELECTED_MODE} > ${MODE_STATUS_FILE}
-
-  case ${SELECTED_MODE} in
-    ${MODE_ID_NONE})
-      et-log "No mode selected"
-    ;;
-    ${MODE_ID_BBS_CLIENT2})
-      if [[ -e /dev/rfcomm0 ]]; then
-        et-log "Starting KISS over TCP"
-
-        socat -d TCP-LISTEN:8100,reuseaddr,fork FILE:/dev/rfcomm0,raw &
-      fi
-
-      if [[ $? -ne 0 ]]; then
-        et-log "Can't start QtTermTCP. KISS over TCP failed to start."
-        exit 1
-      fi
-
-      et-log "Starting QtTermTCP."
-      et-qttermtcp start
-    ;;
-    ${MODE_ID_WINLINK_PACKET})
-      KISS_OUT=$(sudo kissattach ${BT_DEVICE} ${AX25_PORT})
-
-      if [ $? -ne 0 ]; then
-        echo -e "${RED}Failed to setup KISS for Bluetooth TNC.${NC}"
-        exit 1
-      fi
-
-      KISS_OUT=$(sudo kissparms -c 1 -p ${AX25_PORT})
-
-      start_and_wait_for_service et-service-winlink-native-packet
-      min http://localhost:8080
-    ;;
-    *)
-      et-log "Mode ${SELECTED_MODE} not yet supported"
-      exit 1
-    ;;
-  esac
-
-else
-  et-log "No mode selected"
-  echo ${MODE_ID_NONE} > ${MODE_STATUS_FILE}
-  exit 1
-fi