chris/emcomm-tools-os-community
1
0
Fork 0
mirror of https://github.com/thetechprepper/emcomm-tools-os-community.git synced 2026-09-17 15:41:44 -04:00
Code Issues Packages Projects Releases Wiki Activity

PnP Added initial plug-and-play support for the Yaesu FT-991A via the on-board USB

Browse Source
This commit is contained in:
Gaston Gonzalez
2024-12-08 17:47:44 -07:00
parent 7a97cb2093
commit 37f5f7980a
3 changed files with 89 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files
overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft991a.json
+32
View File
@@ -0,0 +1,32 @@
{
"id": "yaesu-ft991a",
"vendor": "Yaesu",
"model": "FT-991A",
"rigctrl": {
"id": "1035",
"baud": "38400",
"ptt": "RIG"
},
"notes": [
"031 CAT RATE = 38400bps",
"032 CAT TOT = 100ms",
"033 CAT RTS = DISABLE",
"062 DATA MODE = OTHERS",
"064 OTHER DISP (SSB) = 1500Hz",
"065 OTHER SHIFT (SSB) = 1500Hz",
"066 DATA LCUT FREQ = OFF",
"068 DATA HCUT FREQ = OFF",
"070 DATA IN SELECT = REAR",
"071 DATA PTT SELECT = DAKY",
"072 DATA PORT SELECT = USB",
"073 DATA OUT LEVEL = 50",
"076 FM PKT PTT SELECT = DAKY",
"077 FM PKT PORT SELECT = USB",
"078 FM PKT TX GAIN = 50",
"079 FM PKT MODE = 1200",
"For HF digital operation always set Mode = DATA-USB",
"For HF digital operation always set WDH = 3000Hz"
],
"fieldNotes": [
]
}
overlay/opt/emcomm-tools/sbin/udev-tester.sh
+20 -3
View File
@@ -1,7 +1,7 @@
#!/bin/bash
# Author : Gaston Gonzalez
# Date : 11 October 2024
# Updated : 21 November 2024
# Updated : 8 December 2024
# Purpose : Perform tests that can be used by the udev subsystem to aid
# in rule development. This is intended to by used with the PROGRAM
# directive inside of a udev rule.
@@ -13,7 +13,7 @@
ET_HOME=/opt/emcomm-tools
ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
# Exit with a 0 exit success if, and only if, the currently selected radio is
# Exit with a 0 exit status if, and only if, the currently selected radio is
# a Yaesu FT-891.
test_yaesu_ft891() {
if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
@@ -27,7 +27,21 @@ test_yaesu_ft891() {
exit 1
}
# Exit with a 0 exit success if, and only if, the currently selected radio
# Exit with a 0 exit status if, and only if, the currently selected radio is
# a Yaesu FT-991A.
test_yaesu_ft991a() {
if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
ID=$(cat "${ET_HOME}/conf/radios.d/active-radio.json" | jq -r .id)
if [[ "$ID" == "yaesu-ft991a" ]]; then
exit 0
fi
fi
exit 1
}
# Exit with a 0 exit status if, and only if, the currently selected radio
# uses a DigiRig Mobile.
test_digirig_mobile() {
if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
@@ -71,6 +85,9 @@ case $1 in
yaesu-ft891)
test_yaesu_ft891
;;
yaesu-ft991a)
test_yaesu_ft991a
;;
digirig-mobile)
test_digirig_mobile
esac