diff --git a/overlay/etc/skel/.reticulum/config.blueprint.permanent-transport-node b/overlay/etc/skel/.reticulum/config.blueprint.permanent-transport-node
index 702d944..b53df33 100644
--- a/overlay/etc/skel/.reticulum/config.blueprint.permanent-transport-node
+++ b/overlay/etc/skel/.reticulum/config.blueprint.permanent-transport-node
@@ -109,15 +109,20 @@
     # Set LoRa bandwidth to 125 KHz
     bandwidth = 125000
     #bandwidth = {{ET_RETICULUM_INTERFACE_RNODE_BANDWIDTH}}
-
+    
     # Set TX power in dBm
-    #  7 dBm = 5 mW
-    # 17 dbm = 50 mW
-    # 20 dbm = 100 mW
-    # 22 dbm = 158 mW
-    # 28 dbm = 631 mW
-    txpower = 22
-    #txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
+    #
+    #  7 dBm =    5 mW
+    # 10 dBm =   10 mW
+    # 14 dBm =   25 mW
+    # 17 dBm =   50 mW
+    # 20 dBm =  100 mW
+    # 22 dBm =  158 mW
+    # 24 dBm =  251 mW
+    # 27 dBm =  501 mW
+    # 28 dBm =  631 mW
+    # 30 dBm = 1000 mW (1 W)
+    txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
 
     # Select spreading factor 8. Valid
     # range is 7 through 12, with 7
diff --git a/overlay/etc/skel/.reticulum/config.blueprint.radio-only-node b/overlay/etc/skel/.reticulum/config.blueprint.radio-only-node
index 01bee0e..3917653 100644
--- a/overlay/etc/skel/.reticulum/config.blueprint.radio-only-node
+++ b/overlay/etc/skel/.reticulum/config.blueprint.radio-only-node
@@ -1,7 +1,7 @@
 # Author    : Gaston Gonzalez
 # Date      : 7 June 2026
-# Updated   : 14 June 2026
-# Blueprint : Permament Transport Node
+# Updated   : 15 June 2026
+# Blueprint : Radio-Only Node, transport disabled
 # Purpose   : This confguration is a blueprint for a radio-only node.
 #             If a supported et-radio and/or et-lora device is
 #             detected, they will be enabled. 
@@ -112,14 +112,18 @@
     #bandwidth = {{ET_RETICULUM_INTERFACE_RNODE_BANDWIDTH}}
 
     # Set TX power in dBm
-    #  7 dBm = 5 mW
-    # 17 dbm = 50 mW
-    # 20 dbm = 100 mW
-    # 22 dbm = 158 mW
-    # 28 dbm = 631 mW
-    # 30 dbm = 1 watt
-    txpower = 22
-    #txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
+    #
+    #  7 dBm =    5 mW
+    # 10 dBm =   10 mW
+    # 14 dBm =   25 mW
+    # 17 dBm =   50 mW
+    # 20 dBm =  100 mW
+    # 22 dBm =  158 mW
+    # 24 dBm =  251 mW
+    # 27 dBm =  501 mW
+    # 28 dBm =  631 mW
+    # 30 dBm = 1000 mW (1 W)
+    txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
 
     # Select spreading factor 8. Valid
     # range is 7 through 12, with 7
diff --git a/overlay/opt/emcomm-tools/bin/et-reticulum b/overlay/opt/emcomm-tools/bin/et-reticulum
index dd574b7..8b6b869 100755
--- a/overlay/opt/emcomm-tools/bin/et-reticulum
+++ b/overlay/opt/emcomm-tools/bin/et-reticulum
@@ -2,7 +2,7 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 12 May 2026
-# Updated : 14 May 2026
+# Updated : 15 May 2026
 # Purpose : Wrapper script for starting Reticulum with PnP support
 #
 # Preconditions:
@@ -18,6 +18,8 @@ APP="Reticulum"
 RETICULUM_CONF_DIR="${HOME}/.reticulum"
 RETICULUM_CONF_FILE="${RETICULUM_CONF_DIR}/config"
 
+INTERFACE_RNODE_TXPOWER_DEFAULT=17
+
 options=()
 files=()
 index=1
@@ -141,15 +143,25 @@ sed -i "s|{{ET_CALLSIGN}}|${CALLSIGN}|g" ${RETICULUM_CONF_FILE}
 # RNode (LoRA) interface updates
 ############################################################
 
-# Enable/disable intereface based on PnP device detection
+# 1. Enable/disable intereface based on PnP device detection
 if [[ -e /dev/et-lora ]]; then
   INTERFACE_RNODE_ENABLED="yes"
 else
   INTERFACE_RNODE_ENABLED="no"
 fi
-
 sed -i "s|{{ET_RETICULUM_INTERFACE_RNODE_ENABLED}}|${INTERFACE_RNODE_ENABLED}|g" ${RETICULUM_CONF_FILE}
 
+# 2. Determine max power settings
+et-log "Connecting to device to determine max power..."
+INTERFACE_RNODE_TXPOWER=`rnodeconf -i /dev/et-lora | awk -F': ' '/Max TX power/ {print $2}' | awk '{print $1}'`
+if [[ $? -ne 0 ]]; then
+  INTERFACE_RNODE_TXPOWER=${INTERFACE_RNODE_TXPOWER_DEFAULT}
+  et-log "Can't determine max power. Using defaulting ${INTERFACE_RNODE_TXPOWER}."
+fi
+
+et-log "Setting max power to ${INTERFACE_RNODE_TXPOWER} dBm."
+sed -i "s|{{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}|${INTERFACE_RNODE_TXPOWER}|g" ${RETICULUM_CONF_FILE}
+
 
 CMD="rnsd"
 et-log "Starting Reticulum: ${CMD}"