PnP - This is a WiP. Set shell to /bin/bash for new users; Added radio model to Conky display; Added initial rigctld wrapper script; Added active-radio command to et-system-info; Fixed missing ET_HOME env variable in rigctld wrapper; Added et user; Added CAT controller installer

overlay/etc/adduser.conf

@@ -7,7 +7,7 @@
 
 # The DSHELL variable specifies the default login shell on your
 # system.
-#DSHELL=/bin/bash
+DSHELL=/bin/bash
 
 # The DHOME variable specifies the directory containing users' home
 # directories.

overlay/etc/skel/.conkyrc

@@ -17,15 +17,17 @@ conky.config = {
 };
 
 conky.text = [[
-${font DejaVu Sans Mono:size=14}${alignc}${time %A, %B %d %Y}
+${font DejaVu Sans Mono:size=12}${alignc}${time %A, %B %d %Y}
 Local: ${alignr}${time %H:%M:%S}
 UTC: ${alignr}${tztime UTC %H:%M:%S}
 Uptime: ${uptime}
 
 IP: ${execpi 60 /opt/emcomm-tools/bin/et-system-info ip} 
 
-${execp /opt/emcomm-tools/bin/et-system-info release}
-CAT: ${execpi 15 /opt/emcomm-tools/bin/et-system-info et-cat}
-GPS: ${execpi 15 /opt/emcomm-tools/bin/et-system-info et-gps}
+Radio: ${execpi 10 et-system-info active-radio}
+CAT  : ${execpi 10 et-system-info et-cat}
+GPS  : ${execpi 10 et-system-info et-gps}
+
+${font DejaVu Sans Mono:size=10}${alignc}${execp /opt/emcomm-tools/bin/et-system-info release}
 ]];
 

overlay/etc/udev/rules.d/80-et-ic705.rules

@@ -1,6 +1,6 @@
 # Author   : Gaston Gonzalez
 # Date     : 28 September 2024
-# Updated  : 5 October 2024
+# Updated  : 9 October 2024
 # Purpose  : udev rules for the Icom IC-705
 #
 # Preconditions:
@@ -9,6 +9,7 @@
 # Postconditions:
 # 1. /dev/et-cat created
 # 2. /dev/et-gps created
+# 3. rigctld is started
 # 
 # Resources
 # - https://www.florian-wolters.de/posts/ic705-serial-device-symlinks/
@@ -21,12 +22,13 @@ KERNEL=="ttyACM[0-9]*", SUBSYSTEM=="tty", ATTRS{product}=="IC-705", \
 # Create consistent device name/path for the CAT serial device
 ENV{ET_DEVICE}=="IC-705", SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="00", \
     ACTION=="add", \
-    ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat"
+    ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
+    RUN+="/opt/emcomm-tools/sbin/wrapper-rigtctld.sh start"
 
 # Create consistent device name/path for the GPS serial device
 ENV{ET_DEVICE}=="IC-705", SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="02", \
     ACTION=="add", \
     ENV{ET_SUBDEVICE}="GPS", GROUP="dialout", MODE="0660", SYMLINK+="et-gps", \
-    RUN+="/opt/emcomm-tools/sbin/wrapper-gpsd.sh start"
+    RUN+="/usr/bin/systemctl start rigctld"
 
 # TODO: Add rules for sound card

overlay/lib/systemd/system/rigctld.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=rigctld service
+ConditionPathExists=/dev/et-cat
+After=multi-user.target
+
+[Service]
+User=et
+ExecStart=/opt/emcomm-tools/sbin/wrapper-rigtctld.sh start
+SuccessExitStatus=143
+
+[Install]
+WantedBy=multi-user.target

overlay/opt/emcomm-tools/bin/et-system-info

@@ -2,14 +2,16 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 6 October 2024
+# Updated  : 10 October 2024
 # Purpose  : Utility script for dumping system information
 
 function usage() {
   echo "Usage: $(basename $0) <command>"
-  echo " et-cat  - Is CAT control connected"
-  echo " et-gps  - Is the GPS connected"
-  echo " ip      - System IP address"
-  echo " release - EmComm Tools Release"
+  echo "  active-radio - Display model of active radio" 
+  echo "  et-cat       - Is CAT control connected"
+  echo "  et-gps       - Is the GPS connected"
+  echo "  ip           - System IP address"
+  echo "  release      - EmComm Tools Release"
 }
 
 if [ $# -ne 1 ]; then
@@ -18,6 +20,13 @@ if [ $# -ne 1 ]; then
 fi
 
 case $1 in
+  active-radio)
+    if [ -L  "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
+      cat /opt/emcomm-tools/conf/radios.d/active-radio.json | jq -r .model
+    else
+      echo "None"
+    fi 
+    ;;
   et-cat)
     if [ -e /dev/et-cat ]; then echo "Yes"; else echo "No"; fi
     ;; 

overlay/opt/emcomm-tools/sbin/wrapper-rigtctld.sh

@@ -4,20 +4,21 @@
 # Date    : 9 October 2024
 # Purpose : Wrapper startup/shutdown script around systemd/rigctld
 
+ET_HOME=/opt/emcomm-tools
 ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
 CAT_DEVICE=/dev/et-cat
 
 do_full_auto() {
-  et-log "Found ET_DEVICE=$ET_DEVICE"
+  et-log "Found ET_DEVICE='${ET_DEVICE}'"
 
   case "$1" in
     IC-705)
-      echo "Automatically configuring $1.."
+      echo "Automatically configuring $1..."
       if [ -L ${ACTIVE_RADIO} ]; then
         rm -v  ${ACTIVE_RADIO}
       fi
 
-      ln -v -s /opt/emcomm-tools/conf/radios.d/icom-ic705.json ${ACTIVE_RADIO}
+      ln -v -s ${ET_HOME}/conf/radios.d/icom-ic705.json ${ACTIVE_RADIO}
     ;;
   *)
     et-log "Full auto configuration not available for ET_DEVICE=$1"
@@ -40,7 +41,7 @@ start() {
   fi
 
   if [ ! -L ${ACTIVE_RADIO} ]; then
-    et-log "No active defined. ${ACTIVE_RADIO} symlink is missing."
+    et-log "No active radio defined. ${ACTIVE_RADIO} symlink is missing."
     exit 1
   fi