tx-500mp - Added initial plug-and-play for the Lab599 TX-500MP via the DigiRig Mobile

overlay/opt/emcomm-tools/bin/et-audio

@@ -2,7 +2,7 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 31 October 2024
-# Updated : 31 May 2024
+# Updated : 13 September 2025
 # Purpose : Configures ET audio device with sane defaults
 #
 # Preconditions
@@ -51,7 +51,7 @@ update-config () {
        case ${ET_DEVICE_NAME} in
          "DIGIRIG_MOBILE")
            # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
-           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
+           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 92% unmute
            # Unmute Mic
            amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
            # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.

overlay/opt/emcomm-tools/conf/radios.d/lab599-tx500mp.json

@@ -0,0 +1,20 @@
+{
+  "id": "lab599-tx500mp",
+  "vendor": "Lab599",
+  "model": "TX-500MP (DigiRig Mobile)",
+  "rigctrl": {
+    "id": "2014",
+    "baud": "9600",
+    "ptt": "RTS",
+    "pttOnly": "false"
+  },
+  "notes": [
+    "1. Set MENU 36 CAT PROTOCOL = TS2000",
+    "2. Set MODE = DIGI",
+    "",
+    "Do not enable VOX on radio"
+
+  ],
+  "fieldNotes": [
+  ]
+}

overlay/opt/emcomm-tools/sbin/udev-tester.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Author  : Gaston Gonzalez
 # Date    : 11 October 2024
-# Updated : 21 May 2025
+# Updated : 13 September 2025
 # Purpose : Perform tests that can be used by the udev subsystem to aid
 #           in rule development. This is intended to by used with the PROGRAM
 #           directive inside of a udev rule.
@@ -81,6 +81,11 @@ test_digirig_mobile() {
       exit 0
     fi
 
+    if [[ "$ID" == "lab599-tx500mp" ]]; then
+      et-log "Old DigiRig Mobile detected for TX-500MP"
+      exit 0
+    fi
+
   fi
   
   exit 1