Xiegu X6100 - Replaced audio setings for the X6100 to use the new audio script approach.

overlay/opt/emcomm-tools/bin/et-audio

@@ -2,7 +2,7 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 31 October 2024
-# Updated : 9 October 2025
+# Updated : 13 October 2025
 # Purpose : Configures ET audio device with sane defaults
 #
 # Preconditions
@@ -128,18 +128,6 @@ update-config () {
            # Disable Auto Gain Control
            amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
 
-           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
-	   ;;
-         "X6100")
-           # Unmute Speaker a set volume. Adjust if remote station can't decode you.
-           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
-           # Unmute Mic
-           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
-           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. 
-           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
-           # Disable Auto Gain Control
-           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
-
            et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
          ;;
          *)

overlay/opt/emcomm-tools/bin/et-radio

@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 11 October 2024
-# Updated  : 16 March 2025
+# Updated  : 13 March 2025
 # Purpose  : A script for managaing plug-and-play radios
 source /opt/emcomm-tools/bin/et-common
 
@@ -18,7 +18,7 @@ while IFS= read -r radio; do
     MODEL=$(cat $radio | jq -r .model)
 
     options+=("$ID" "$VENDOR $MODEL")
-done < <(find $ET_HOME/conf/radios.d -type f | grep -v "bt.json" | sort)
+done < <(find $ET_HOME/conf/radios.d -type f -name \*.json | grep -v "bt.json" | sort)
 
 SELECTED_RADIO=$(dialog --clear --menu "Select a radio:" 21 60 10 "${options[@]}" 3>&1 1>&2 2>&3)
 exit_status=$?

overlay/opt/emcomm-tools/conf/radios.d/audio/lab599-tx500mp.sh

@@ -23,7 +23,7 @@ AUDIO_CARD=$1
 ET_DEVICE_NAME=$2
 
 # Unmute Speaker and set the volume to 81. Adjust if the remote station
-# can't decode you or if there is not output power on TX.
+# can't decode you or if there is no output power on TX.
 amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 92% unmute
 
 # Unmute Mic

overlay/opt/emcomm-tools/conf/radios.d/audio/xiegu-x6100.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+#
+# Author  : Gaston Gonzalez
+# Date    : 13 October 2025
+# Purpose : Audio settings specific to the Xiegu X6100
+#
+# Preconditions
+# 1. Supported audio interface is connected and properly detected
+#
+# Postconditions
+# 1. ALSA settings set on ET audio device
+
+usage() {
+  echo "usage: $(basename $0) <ET audio card> <ET device name>"
+}
+
+if [[ $# -ne 2 ]]; then
+  usage
+  exit 1
+fi
+
+AUDIO_CARD=$1
+ET_DEVICE_NAME=$2
+
+# Unmute Speaker and set the volume to 27. Adjust if the remote station
+# can't decode you or if there is no output power on TX.
+amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
+
+# Unmute Mic
+amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
+
+# Set "L/R Capture" to 19. Adjust if you can't decode received audio.
+amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
+
+# Disable Auto Gain Control
+amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
+
+et-log "Applied amixer settings for audio card ${AUDIO_CARD} on device ${ET_DEVICE_NAME}"

overlay/opt/emcomm-tools/conf/radios.d/xiegu-x6100.json

@@ -8,6 +8,9 @@
     "ptt": "RIG",
     "conf": "timeout=1000,retry=1,timeout_retry=1",
     "primeRig": true
+  },
+    "audio": {
+    "script": "/opt/emcomm-tools/conf/radios.d/audio/xiegu-x6100.sh"
   },
   "notes": [
     "Turn on radio",