PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

overlay/opt/emcomm-tools/conf/radios.d/digirig-lite.json

@@ -1,7 +1,7 @@
 {
-  "id": "generic-vox",
-  "vendor": "Generic",
-  "model": "VOX",
+  "id": "digirig-lite",
+  "vendor": "DigiRig",
+  "model": "Lite",
   "rigctrl": {
     "id": "1",
     "ptt": "NONE"

overlay/opt/emcomm-tools/conf/radios.d/digirig-mobile-no-cat.json

@@ -0,0 +1,12 @@
+{
+  "id": "digirig-mobile-no-cat",
+  "vendor": "DigiRig",
+  "model": "Mobile (No CAT)",
+  "rigctrl": {
+    "id": "1",
+    "ptt": "RTS"
+  },
+  "notes": [
+    "Uses RTS to trigger PTT"
+  ]
+}

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft818nd.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft818nd",
   "vendor": "Yaesu",
-  "model": "FT-818ND",
+  "model": "FT-818ND (DigiRig)",
   "rigctrl": {
     "id": "1041",
     "baud": "38400",

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft857d.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft857d",
   "vendor": "Yaesu",
-  "model": "FT-857D",
+  "model": "FT-857D (DigiRig)",
   "rigctrl": {
     "id": "1022",
     "baud": "38400",

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft897d.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft897d",
   "vendor": "Yaesu",
-  "model": "FT-897D",
+  "model": "FT-897D (Mobile)",
   "rigctrl": {
     "id": "1043",
     "baud": "38400",