From 7fa45bf0e3b8ecbb5b7a6311620a7b7bc784c7ca Mon Sep 17 00:00:00 2001
From: thetechprepper <info@thetechprepper.com>
Date: Sat, 31 May 2025 05:06:01 -0700
Subject: [PATCH] FTX-1 - Added support for basic audio settings. Updated
 operating notes

---
 overlay/opt/emcomm-tools/bin/et-audio              | 14 +++++++++++++-
 .../opt/emcomm-tools/conf/radios.d/yaesu-ftx1.json | 13 +++++++++----
 2 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/overlay/opt/emcomm-tools/bin/et-audio b/overlay/opt/emcomm-tools/bin/et-audio
index 2f921e5..dc33bde 100755
--- a/overlay/opt/emcomm-tools/bin/et-audio
+++ b/overlay/opt/emcomm-tools/bin/et-audio
@@ -2,7 +2,7 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 31 October 2024
-# Updated : 11 November 2024
+# Updated : 31 May 2024
 # Purpose : Configures ET audio device with sane defaults
 #
 # Preconditions
@@ -85,6 +85,18 @@ update-config () {
 
            et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
          ;;
+         "FTX-1")
+           # Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
+           amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
+           # Unmute Mic
+           amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
+           # Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
+           amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
+           # Disable Auto Gain Control
+           amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
+
+           et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
+         ;;
          *)
            et-log "No ALSA configuration specified for this ET_DEVICE."
          ;;
diff --git a/overlay/opt/emcomm-tools/conf/radios.d/yaesu-ftx1.json b/overlay/opt/emcomm-tools/conf/radios.d/yaesu-ftx1.json
index 9fb516b..67c6bd7 100644
--- a/overlay/opt/emcomm-tools/conf/radios.d/yaesu-ftx1.json
+++ b/overlay/opt/emcomm-tools/conf/radios.d/yaesu-ftx1.json
@@ -10,10 +10,15 @@
   },
   "notes": [
     "Tune radio to desired frequency.",
-    "Long press [MODE] and set desired mode.",
-    "Use 'DATA-U' for most HF operation",
-    "Use 'TODO' for FM packet operation",
-    "Under MODE, long press 'PRESET' and select FT8"
+    "Long press [MODE], then set accordingly for HF or VHF/UHF.",
+    "For HF operation:",
+    "- First, select 'DATA-U'.",
+    "- Then, long press 'PRESET' and select 'FT8'.",
+    "- The 'PREEST' button should be highlighted in blue.",
+    "For VHF/UHF FM operation:",
+    "- First, select 'FM'.",
+    "- Then, long press 'PRESET' and select 'FT8'.",
+    "- The 'PRESET' button should be highlighted in blue."
   ],
   "fieldNotes": [
   ]