mirror of
https://github.com/thetechprepper/emcomm-tools-os-community.git
synced 2026-09-17 15:41:44 -04:00
Merge branch 'release/r5' into feature/rtl-sdr-v4
This commit is contained in:
William McKeehan
@@ -2,14 +2,14 @@
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 31 October 2024
|
||||
# Updated : 31 May 2024
|
||||
# Updated : 26 September 2025
|
||||
# Purpose : Configures ET audio device with sane defaults
|
||||
#
|
||||
# Preconditions
|
||||
# 1. Supported audio interface is connected and properly detected
|
||||
#
|
||||
# Postconditions
|
||||
# 1. ASLA settings set on ET audio device
|
||||
# 1. ALSA settings set on ET audio device
|
||||
|
||||
usage() {
|
||||
echo "usage: $(basename $0) <command>"
|
||||
@@ -50,6 +50,8 @@ update-config () {
|
||||
|
||||
case ${ET_DEVICE_NAME} in
|
||||
"DIGIRIG_MOBILE")
|
||||
# TODO: 92% is needed for the TX-500MP. Revisit approach for setting speaker
|
||||
# out differently across radios definitions.
|
||||
# Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
|
||||
amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
|
||||
# Unmute Mic
|
||||
@@ -97,6 +99,19 @@ update-config () {
|
||||
|
||||
et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
|
||||
;;
|
||||
"FX-4CR")
|
||||
# Unmute the PCM and set the volume to 21% to get the full output power. This value is
|
||||
# dependent on the settings defined for the FX-4CR in the et-radio notes.
|
||||
amixer -q -c ${AUDIO_CARD} sset 'PCM' 31% unmute
|
||||
|
||||
# Set "L/R Capture" to 55%. Adjust if you can't decode received audio.
|
||||
amixer -q -c ${AUDIO_CARD} sset 'Mic' 67% unmute
|
||||
|
||||
# Disable Auto Gain Control
|
||||
amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
|
||||
|
||||
et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
|
||||
;;
|
||||
*)
|
||||
et-log "No ALSA configuration specified for this ET_DEVICE."
|
||||
;;
|
||||
|
||||
Executable
+201
@@ -0,0 +1,201 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 2 October 2025
|
||||
# Purpose : Wrapper script for starting fldigi with PnP support
|
||||
#
|
||||
# Preconditions
|
||||
# 1. Supported radio and audio interface are connected and properly detected
|
||||
#
|
||||
# Postconditions
|
||||
# 1. Stop all running EmComm Tools modes
|
||||
# 2. fldigi core settings updated (e.g., CAT, audio, user config and ETC defaults)
|
||||
# 3. fldigi started
|
||||
|
||||
usage() {
|
||||
echo "usage: $(basename $0) <command>"
|
||||
echo " start - Update config and start fldigi"
|
||||
echo " update-config - Update config"
|
||||
}
|
||||
|
||||
if [[ $# -ne 1 ]]; then
|
||||
usage
|
||||
exit 1
|
||||
fi
|
||||
|
||||
notify_user() {
|
||||
notify-send \
|
||||
-t 5000 \
|
||||
--app-name="EmComm Tools" \
|
||||
"$1"
|
||||
}
|
||||
|
||||
start() {
|
||||
/opt/emcomm-tools/bin/et-kill-all && update-config && /usr/local/bin/fldigi &
|
||||
}
|
||||
|
||||
update-config () {
|
||||
|
||||
# 1. Check if the audio device symlink was created by the udev rules
|
||||
if [[ -e /dev/et-audio ]]; then
|
||||
|
||||
# 2. Check that this device was properly tagged with the ET_AUDIO env variable
|
||||
APLAY_OUT=$(arecord -l | grep ET_AUDIO)
|
||||
if [[ $? -eq 0 ]]; then
|
||||
|
||||
## Configure ALSA settings for sound card
|
||||
/opt/emcomm-tools/bin/et-audio update-config
|
||||
|
||||
else
|
||||
et-log "No ET_AUDIO device detected."
|
||||
notify_user "Can't start fldigi. No ET_AUDIO device detected."
|
||||
exit 1
|
||||
fi
|
||||
else
|
||||
et-log "No ET_AUDIO device plugged in."
|
||||
notify_user "Can't start fldigi. No supported audio device plugged in."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
PORT_AUDIO_CONF=/tmp/conf.tmp
|
||||
GEO_CONF=/tmp/geo.tmp
|
||||
FLDIGI_CONF_DIR="${HOME}/.fldigi"
|
||||
FLDIGI_CONF_FILE="${FLDIGI_CONF_DIR}/fldigi_def.xml"
|
||||
|
||||
if [[ ! -e ${FLDIGI_CONF_DIR} ]]; then
|
||||
et-log "${FLDIGI_CONF_DIR} does not exist. Creating it from template."
|
||||
mkdir -v ${FLDIGI_CONF_DIR}
|
||||
cp -v /etc/skel/.fldigi/fldigi_def.xml ${FLDIGI_CONF_DIR}
|
||||
fi
|
||||
|
||||
[ -z "$ET_USER_CONFIG" ] && ET_USER_CONFIG="${HOME}/.config/emcomm-tools/user.json"
|
||||
|
||||
# clean up temporary config that may exist
|
||||
[[ -e ${PORT_AUDIO_CONF} ]] && rm ${PORT_AUDIO_CONF}
|
||||
|
||||
et-portaudio 2>/dev/null > ${PORT_AUDIO_CONF}
|
||||
|
||||
if [[ $? -ne 0 ]]; then
|
||||
et-log "No supported ET_AUDIO device found"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
DEVICE=$(jq -r -e '.device' ${PORT_AUDIO_CONF})
|
||||
if [[ $? -ne 0 ]]; then
|
||||
et-log "Error getting PulseAudio device name for ET_AUDIO device"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
INDEX=$(jq -r -e '.index' ${PORT_AUDIO_CONF})
|
||||
if [[ $? -ne 0 ]]; then
|
||||
et-log "Error getting PulseAudio device index for ET_AUDIO device"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
##############################################
|
||||
# Map ALSA ET_AUDIO device to PortAudio device
|
||||
##############################################
|
||||
et-log "Updating PortAudio device configuration..."
|
||||
|
||||
sed -i "s|^<AUDIOIO>.*|<AUDIOIO>1</AUDIOIO>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
sed -i "s|^<PORTINDEVICE>.*|<PORTINDEVICE>${DEVICE}</PORTINDEVICE>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<PORTININDEX>.*|<PORTININDEX>${INDEX}</PORTININDEX>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
sed -i "s|^<PORTOUTDEVICE>.*|<PORTOUTDEVICE>${DEVICE}</PORTOUTDEVICE>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<PORTOUTINDEX>.*|<PORTOUTINDEX>${INDEX}</PORTOUTINDEX>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
et-log "Using device '${DEVICE}' and device index '${INDEX}' for PortAudio configuration"
|
||||
|
||||
|
||||
#################
|
||||
# Update callsign
|
||||
#################
|
||||
et-log "Updating callsign configuration..."
|
||||
CALLSIGN=$(jq -r -e '.callsign' ${ET_USER_CONFIG})
|
||||
|
||||
if [[ "${CALLSIGN}" = "N0CALL" ]]; then
|
||||
et-log "Exiting early. No callsign set. Run: et-user."
|
||||
exit 1
|
||||
fi
|
||||
|
||||
et-log "Using callsign '${CALLSIGN}'"
|
||||
sed -i "s|^<MYCALL>.*|<MYCALL>${CALLSIGN}</MYCALL>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
|
||||
###############################################
|
||||
# Update grid based on ETC geolocation services
|
||||
###############################################
|
||||
et-log "Updating your grid square..."
|
||||
curl -f -s "http://localhost:1981/api/geo/position" > ${GEO_CONF}
|
||||
|
||||
if [[ $? -eq 0 ]]; then
|
||||
GRID=$(jq -r -e '.position.gridSquare' ${GEO_CONF})
|
||||
if [[ $? -eq 0 ]]; then
|
||||
et-log "Using grid square '${GRID}' for your location"
|
||||
sed -i "s|^<MYLOC>.*|<MYLOC>${GRID}</MYLOC>|" ${FLDIGI_CONF_FILE}
|
||||
fi
|
||||
fi
|
||||
|
||||
[[ -e ${GEO_CONF} ]] && rm ${GEO_CONF}
|
||||
|
||||
|
||||
#####################################################################
|
||||
# Configure CAT interface using Hamlib's rig control daemon (rigctld)
|
||||
#####################################################################
|
||||
et-log "Updating CAT control configuration..."
|
||||
|
||||
sed -i "s|^<CHKUSEHAMLIBIS>.*|<CHKUSEHAMLIBIS>1</CHKUSEHAMLIBIS>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<HAMRIGMODEL>.*|<HAMRIGMODEL>2</HAMRIGMODEL>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<HAMLIBCMDPTT>.*|<HAMLIBCMDPTT>1</HAMLIBCMDPTT>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<HAMRIGDEVICE>.*|<HAMRIGDEVICE>localhost:4532</HAMRIGDEVICE>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
|
||||
######################################
|
||||
# Enable Reed Soloman ID for RX and TX
|
||||
######################################
|
||||
et-log "Enabling Reed Soloman ID for RX/TX..."
|
||||
|
||||
sed -i "s|^<RECEIVERSID>.*|<RECEIVERSID>1</RECEIVERSID>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<TRANSMITRSID>.*|<TRANSMITRSID>1</TRANSMITRSID>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
|
||||
###########################
|
||||
# Modem configuration: MT63
|
||||
###########################
|
||||
et-log "Updating MT63 modem configuration..."
|
||||
|
||||
sed -i "s|^<MT63INTEGRATION>.*|<MT63INTEGRATION>1</MT63INTEGRATION>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
|
||||
########################
|
||||
# Repeater configuration
|
||||
########################
|
||||
et-log "Updating settings for linked repeater systems..."
|
||||
|
||||
# Key up for 2 seconds before transmitting tone. Needed for linked repeater systems.
|
||||
sed -i "s|^<PRETONE>.*|<PRETONE>2</PRETONE>|" ${FLDIGI_CONF_FILE}
|
||||
|
||||
|
||||
#####################
|
||||
# NBEMS configuration
|
||||
#####################
|
||||
et-log "Updating settings for NBEMS..."
|
||||
|
||||
sed -i "s|^<OPEN_NBEMS_FOLDER>.*|<OPEN_NBEMS_FOLDER>1</OPEN_NBEMS_FOLDER>|" ${FLDIGI_CONF_FILE}
|
||||
sed -i "s|^<FLMSG_PATHNAME>.*|<FLMSG_PATHNAME>/usr/local/bin/flmsg</FLMSG_PATHNAME>|" ${FLDIGI_CONF_FILE}
|
||||
}
|
||||
|
||||
case $1 in
|
||||
start)
|
||||
start
|
||||
;;
|
||||
update-config)
|
||||
update-config
|
||||
;;
|
||||
*)
|
||||
echo "Invalid command."
|
||||
usage
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
@@ -2,7 +2,7 @@
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 12 November 2024
|
||||
# Updated : 7 February 2025
|
||||
# Updated : 2 October 2025
|
||||
# Purpose : Stops all EmComm Tools sound-based services (i.e. modems) and
|
||||
# amatuer radio applications to ensure a clean start for the next mode.
|
||||
|
||||
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"id": "bg2fx-fx4cr",
|
||||
"vendor": "BG2FX",
|
||||
"model": "FX-4CR",
|
||||
"rigctrl": {
|
||||
"id": "2031",
|
||||
"baud": "115200",
|
||||
"ptt": "RIG",
|
||||
"conf": "data_bits=8,serial_handshake=None,stop_bits=1,rts_state=OFF",
|
||||
"pttOnly": "false"
|
||||
},
|
||||
"notes": [
|
||||
"Short press [PWR], then rotate AF knob until POW = 5.0",
|
||||
"Toggle [SSB] button until both USB and DIG appear",
|
||||
"Short press [M. V] until VFOA is displayed",
|
||||
"Long press [MENU], rotate AF to BLUETOOTH, rotate TUNE and set to 0",
|
||||
"Set radio volume to 50",
|
||||
"Set mic gain to 50",
|
||||
"Set alsamixer PCM to 21",
|
||||
"Set alsamixer Mic to 55",
|
||||
"Set alsamixer AGC to mm"
|
||||
],
|
||||
"fieldNotes": [
|
||||
"Tested with FX-4CR firmware version: 1.7.3 (2025/09/01)",
|
||||
"You must force the RTS control line to low for audio output to work with the PTT",
|
||||
"This is handled with rts_state=OFF using the --set-conf argument of rigctld"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
{
|
||||
"id": "lab599-tx500mp",
|
||||
"vendor": "Lab599",
|
||||
"model": "TX-500MP (DigiRig Mobile)",
|
||||
"rigctrl": {
|
||||
"id": "2014",
|
||||
"baud": "9600",
|
||||
"ptt": "RTS",
|
||||
"pttOnly": "false"
|
||||
},
|
||||
"notes": [
|
||||
"1. Set MENU 36 CAT PROTOCOL = TS2000",
|
||||
"2. Set MODE = DIGI",
|
||||
"",
|
||||
"Do not enable VOX on radio"
|
||||
|
||||
],
|
||||
"fieldNotes": [
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
#!/bin/bash
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 11 October 2024
|
||||
# Updated : 21 May 2025
|
||||
# Updated : 13 September 2025
|
||||
# Purpose : Perform tests that can be used by the udev subsystem to aid
|
||||
# in rule development. This is intended to by used with the PROGRAM
|
||||
# directive inside of a udev rule.
|
||||
@@ -81,6 +81,11 @@ test_digirig_mobile() {
|
||||
exit 0
|
||||
fi
|
||||
|
||||
if [[ "$ID" == "lab599-tx500mp" ]]; then
|
||||
et-log "Old DigiRig Mobile detected for TX-500MP"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
fi
|
||||
|
||||
exit 1
|
||||
|
||||
@@ -2,13 +2,16 @@
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 9 October 2024
|
||||
# Updated : 31 May 2025
|
||||
# Updated : 26 September 2025
|
||||
# Purpose : Wrapper startup/shutdown script around systemd/rigctld
|
||||
|
||||
ET_HOME=/opt/emcomm-tools
|
||||
ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
|
||||
CAT_DEVICE=/dev/et-cat
|
||||
|
||||
# Additional configuration to pass to rigctld
|
||||
SET_CONF=""
|
||||
|
||||
do_full_auto() {
|
||||
et-log "Found ET_DEVICE='${ET_DEVICE}'"
|
||||
|
||||
@@ -95,8 +98,14 @@ start() {
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Handle optional configuration settings
|
||||
CONF=$(jq -e -r '.rigctrl.conf' "${ET_HOME}/conf/radios.d/active-radio.json")
|
||||
if [[ $? -eq 0 ]]; then
|
||||
SET_CONF="--set-conf=${CONF}"
|
||||
fi
|
||||
|
||||
# Generate command
|
||||
CMD="rigctld -m ${ID} -r ${CAT_DEVICE} -s ${BAUD} -P ${PTT} "
|
||||
CMD="rigctld -m ${ID} -r ${CAT_DEVICE} -s ${BAUD} -P ${PTT} ${SET_CONF}"
|
||||
et-log "Starting rigctld with: ${CMD}"
|
||||
$CMD
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user