diff --git a/overlay/opt/emcomm-tools/bin/et-direwolf b/overlay/opt/emcomm-tools/bin/et-direwolf
index 31c49fb..c9cfbd1 100755
--- a/overlay/opt/emcomm-tools/bin/et-direwolf
+++ b/overlay/opt/emcomm-tools/bin/et-direwolf
@@ -14,16 +14,36 @@
 DIREWOLF_CONF_FILE=${ET_HOME}/conf/template.d/packet/direwolf.conf
 
 usage() {
-  echo "usage: $(basename $0) <command>"
-  echo "  start           - Update config and start Dire Wolf"
-  echo "  update-config   - Update config"
+  echo "usage: $(basename $0) <command> <type>"
+  echo "  <command>"
+  echo "    start           - Start Dire Wolf in selected mode"
+  echo "    update-config   - Update configuration for selected mode"
+  echo ""
+  echo "  <type>"
+  echo "    digipeater-only - Run in RF-only digipeater mode"
+  echo "    simple-packet   - Run in simple packet mode"
 }
 
-if [ $# -ne 1 ]; then
+if [ $# -ne 2 ]; then
   usage
   exit 1
 fi
 
+MODE=$2
+case "${MODE}" in
+  digipeater-only)
+    DIREWOLF_TEMPLATE_CONF_FILE="${ET_HOME}/conf/template.d/packet/direwolf.${MODE}.conf"
+  ;;
+  simple-packet)
+    DIREWOLF_TEMPLATE_CONF_FILE="${ET_HOME}/conf/template.d/packet/direwolf.${MODE}.conf"
+  ;;
+  *)
+    et-log "Can't started Dire Wolf. Mode '${MODE}' not supported"
+    usage
+    exit 1
+  ;;
+esac
+
 notify_user() {
   notify-send \
    -t 5000 \
@@ -47,8 +67,8 @@ start() {
 
 update-config () {
 
-    DIREWOLF_TEMPLATE_CONF_FILE=${ET_HOME}/conf/template.d/packet/direwolf.simple-packet.conf
-   
+    et-log "Attempting to start Dire Wolf in mode: '${MODE}'"
+
     [ -z "$ET_USER_CONFIG" ] && ET_USER_CONFIG="${HOME}/.config/emcomm-tools/user.json"
 
     CALLSIGN=$(cat ${ET_USER_CONFIG} | jq -r .callsign)
diff --git a/overlay/opt/emcomm-tools/conf/template.d/packet/direwolf.digipeater-only.conf b/overlay/opt/emcomm-tools/conf/template.d/packet/direwolf.digipeater-only.conf
new file mode 100644
index 0000000..552e5f1
--- /dev/null
+++ b/overlay/opt/emcomm-tools/conf/template.d/packet/direwolf.digipeater-only.conf
@@ -0,0 +1,27 @@
+# Author  : Gaston Gonzalez
+# Date    : 1 November 2024
+# Purpose : Dire Wolf template for basic RF-only digipeater operation  
+
+# Audio settings
+ADEVICE {{ET_AUDIO_DEVICE}}
+CHANNEL 0
+
+# User settings
+MYCALL {{ET_CALLSIGN}}-4
+
+# Modem settings
+MODEM 1200
+
+# Rig control settings. Do not change this.
+# EmComm Tools uses Hamlib's rig control daemon for all radio interfaces.
+PTT RIG 2 localhost:4532
+
+# Enable ports to allow other applications use Dire Wolf as the packet engine
+AGWPORT 8000
+KISSPORT 8001
+
+# TODO: Replace lat with {{ET_LAT_DECIMAL}}
+# TODO: Replace lon with {{ET_LON_DECIMAL}}
+PBEACON delay=1  every=30 overlay=S symbol="digi" lat=33.5828 long=-112.1499 power=5 height=16 gain=9 comment="EmComm Tools Digi" via=WIDE1-1
+DIGIPEAT 0 0 ^WIDE[3-7]-[1-7]$|^TEST$ ^WIDE[12]-[12]$ TRACE
+IGTXLIMIT 6 10