mirror of
https://github.com/thetechprepper/emcomm-tools-os-community.git
synced 2026-09-17 15:41:44 -04:00
reticulum - Removed the RNode interface from all the radio-only interfaces (i.e., packet, modem73, and mercury)
This commit is contained in:
thetechprepper
@@ -2,8 +2,7 @@
|
||||
# Date : 16 July 2026
|
||||
# Blueprint : Radio-Only Node, transport disabled
|
||||
# Purpose : This confguration is a blueprint for a radio-only node.
|
||||
# It uses Mercury as the radio interface. If a supported
|
||||
# et-lora device is detected, it will be enabled, too.
|
||||
# It uses Mercury as the radio interface.
|
||||
|
||||
[reticulum]
|
||||
|
||||
@@ -82,51 +81,8 @@
|
||||
|
||||
[[Default Interface]]
|
||||
type = AutoInterface
|
||||
enabled = No
|
||||
|
||||
[[RNode LoRa Interface]]
|
||||
type = RNodeInterface
|
||||
mode = roaming
|
||||
#enabled = {{ET_RETICULUM_INTERFACE_RNODE_ENABLED}}
|
||||
enabled = no
|
||||
|
||||
port = /dev/et-lora
|
||||
|
||||
# Set frequency to 915 MHz
|
||||
frequency = 915000000
|
||||
#frequency = {{ET_RETICULUM_INTERFACE_RNODE_FREQUENCY}}
|
||||
|
||||
# Set LoRa bandwidth to 125 KHz
|
||||
bandwidth = 125000
|
||||
#bandwidth = {{ET_RETICULUM_INTERFACE_RNODE_BANDWIDTH}}
|
||||
|
||||
# Set TX power in dBm
|
||||
#
|
||||
# 7 dBm = 5 mW
|
||||
# 10 dBm = 10 mW
|
||||
# 14 dBm = 25 mW
|
||||
# 17 dBm = 50 mW
|
||||
# 20 dBm = 100 mW
|
||||
# 22 dBm = 158 mW
|
||||
# 24 dBm = 251 mW
|
||||
# 27 dBm = 501 mW
|
||||
# 28 dBm = 631 mW
|
||||
# 30 dBm = 1000 mW (1 W)
|
||||
txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
|
||||
|
||||
# Select spreading factor 8. Valid
|
||||
# range is 7 through 12, with 7
|
||||
# being the fastest and 12 having
|
||||
# the longest range.
|
||||
spreadingfactor = 9
|
||||
#spreadingfactor = {{ET_RETICULUM_INTERFACE_RNODE_SPREADINGFACTOR}}
|
||||
|
||||
# Select coding rate 5. Valid range
|
||||
# is 5 throough 8, with 5 being the
|
||||
# fastest, and 8 the longest range.
|
||||
codingrate = 5
|
||||
#codingrate = {{ET_RETICULUM_INTERFACE_RNODE_CODINGRATE}}
|
||||
|
||||
# See https://github.com/Rhizomatica/mercury/blob/mercuryv2/docs/RETICULUM.md
|
||||
[[Mercury HF]]
|
||||
type = TCPClientInterface
|
||||
|
||||
@@ -3,8 +3,7 @@
|
||||
# Updated : 16 July 2026
|
||||
# Blueprint : Radio-Only Node, transport disabled
|
||||
# Purpose : This confguration is a blueprint for a radio-only node.
|
||||
# It uses modem73 as the radio interface. If a supported
|
||||
# et-lora device is detected, it will be enabled, too.
|
||||
# It uses modem73 as the radio interface.
|
||||
|
||||
[reticulum]
|
||||
|
||||
@@ -85,48 +84,6 @@
|
||||
type = AutoInterface
|
||||
enabled = no
|
||||
|
||||
[[RNode LoRa Interface]]
|
||||
type = RNodeInterface
|
||||
mode = roaming
|
||||
enabled = {{ET_RETICULUM_INTERFACE_RNODE_ENABLED}}
|
||||
|
||||
port = /dev/et-lora
|
||||
|
||||
# Set frequency to 915 MHz
|
||||
frequency = 915000000
|
||||
#frequency = {{ET_RETICULUM_INTERFACE_RNODE_FREQUENCY}}
|
||||
|
||||
# Set LoRa bandwidth to 125 KHz
|
||||
bandwidth = 125000
|
||||
#bandwidth = {{ET_RETICULUM_INTERFACE_RNODE_BANDWIDTH}}
|
||||
|
||||
# Set TX power in dBm
|
||||
#
|
||||
# 7 dBm = 5 mW
|
||||
# 10 dBm = 10 mW
|
||||
# 14 dBm = 25 mW
|
||||
# 17 dBm = 50 mW
|
||||
# 20 dBm = 100 mW
|
||||
# 22 dBm = 158 mW
|
||||
# 24 dBm = 251 mW
|
||||
# 27 dBm = 501 mW
|
||||
# 28 dBm = 631 mW
|
||||
# 30 dBm = 1000 mW (1 W)
|
||||
txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
|
||||
|
||||
# Select spreading factor 8. Valid
|
||||
# range is 7 through 12, with 7
|
||||
# being the fastest and 12 having
|
||||
# the longest range.
|
||||
spreadingfactor = 9
|
||||
#spreadingfactor = {{ET_RETICULUM_INTERFACE_RNODE_SPREADINGFACTOR}}
|
||||
|
||||
# Select coding rate 5. Valid range
|
||||
# is 5 throough 8, with 5 being the
|
||||
# fastest, and 8 the longest range.
|
||||
codingrate = 5
|
||||
#codingrate = {{ET_RETICULUM_INTERFACE_RNODE_CODINGRATE}}
|
||||
|
||||
[[modem73]]
|
||||
type = Modem73Interface
|
||||
mode = roaming
|
||||
|
||||
@@ -3,8 +3,7 @@
|
||||
# Updated : 16 July 2026
|
||||
# Blueprint : Radio-Only Node, transport disabled
|
||||
# Purpose : This confguration is a blueprint for a radio-only node.
|
||||
# It uses an AX.25 KISS radio interface. If a supported
|
||||
# et-lora device is detected, it will be enabled, too.
|
||||
# It uses an AX.25 KISS radio interface.
|
||||
|
||||
|
||||
[reticulum]
|
||||
@@ -96,45 +95,3 @@
|
||||
|
||||
port = /tmp/kisstnc
|
||||
mtu = 256
|
||||
|
||||
[[RNode LoRa Interface]]
|
||||
type = RNodeInterface
|
||||
mode = roaming
|
||||
enabled = {{ET_RETICULUM_INTERFACE_RNODE_ENABLED}}
|
||||
|
||||
port = /dev/et-lora
|
||||
|
||||
# Set frequency to 915 MHz
|
||||
frequency = 915000000
|
||||
#frequency = {{ET_RETICULUM_INTERFACE_RNODE_FREQUENCY}}
|
||||
|
||||
# Set LoRa bandwidth to 125 KHz
|
||||
bandwidth = 125000
|
||||
#bandwidth = {{ET_RETICULUM_INTERFACE_RNODE_BANDWIDTH}}
|
||||
|
||||
# Set TX power in dBm
|
||||
#
|
||||
# 7 dBm = 5 mW
|
||||
# 10 dBm = 10 mW
|
||||
# 14 dBm = 25 mW
|
||||
# 17 dBm = 50 mW
|
||||
# 20 dBm = 100 mW
|
||||
# 22 dBm = 158 mW
|
||||
# 24 dBm = 251 mW
|
||||
# 27 dBm = 501 mW
|
||||
# 28 dBm = 631 mW
|
||||
# 30 dBm = 1000 mW (1 W)
|
||||
txpower = {{ET_RETICULUM_INTERFACE_RNODE_TXPOWER}}
|
||||
|
||||
# Select spreading factor 8. Valid
|
||||
# range is 7 through 12, with 7
|
||||
# being the fastest and 12 having
|
||||
# the longest range.
|
||||
spreadingfactor = 9
|
||||
#spreadingfactor = {{ET_RETICULUM_INTERFACE_RNODE_SPREADINGFACTOR}}
|
||||
|
||||
# Select coding rate 5. Valid range
|
||||
# is 5 throough 8, with 5 being the
|
||||
# fastest, and 8 the longest range.
|
||||
codingrate = 5
|
||||
#codingrate = {{ET_RETICULUM_INTERFACE_RNODE_CODINGRATE}}
|
||||
|
||||
Reference in New Issue
Block a user