From da71bab6d4ae20cf2bbcf25a402d3f765d375721 Mon Sep 17 00:00:00 2001
From: Gaston Gonzalez <gaston.gonzalez@yahoo.com>
Date: Sun, 10 Nov 2024 08:53:16 -0700
Subject: [PATCH 1/3] Xiegu G90 - Added radio settings as notes. Moved previous
 notes into a fieldNotes section that will be used in a future release

---
 overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json b/overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json
index 9644e04..9591139 100644
--- a/overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json
+++ b/overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json
@@ -8,6 +8,13 @@
     "ptt": "RTS"
   },
   "notes": [
+    "AGC = OFF (AGC--)",
+    "MODE = U-D",
+    "RF-GAIN = 50%",
+    "AUX IN = 10",
+    "AUX OUT = 13"
+  ],
+  "fieldNotes": [
     "Set AGC: Short press [AGC]",
     "Set Mode: Press Mode arrow keys on top of head unit ",
     "Set RF Gain: Long press [AGC]. Use VFO knob to change",

From 76ce47d769afd3e9b7fa8288e1375d5601896318 Mon Sep 17 00:00:00 2001
From: Gaston Gonzalez <info@thetechprepper.com>
Date: Sun, 10 Nov 2024 09:09:29 -0700
Subject: [PATCH 2/3] et-radio Improved the end-users instructions

---
 overlay/opt/emcomm-tools/bin/et-radio | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/overlay/opt/emcomm-tools/bin/et-radio b/overlay/opt/emcomm-tools/bin/et-radio
index 1754a39..cf0e352 100755
--- a/overlay/opt/emcomm-tools/bin/et-radio
+++ b/overlay/opt/emcomm-tools/bin/et-radio
@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 11 October 2024
-# Updated  : 3 November 2024
+# Updated  : 10 November 2024
 # Purpose  : A script for managaing plug-and-play radios
 set -e
 
@@ -10,6 +10,11 @@ ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
 
 NO_RADIO_ID="no-radio"
 
+YELLOW="\033[1;33m"
+GREEN="\033[0;32m"
+RED="\033[0;31m"
+NC="\033[0m"
+
 options=()
 options+=("${NO_RADIO_ID}" "No radio")
 while IFS= read -r radio; do
@@ -44,13 +49,19 @@ if [ $exit_status -eq 0 ]; then
   MODEL=$(cat ${ACTIVE_RADIO} | jq -r .model)
 
   printf "%-20s %-10s %-10s\n" "Radio ID" "Vendor" "Model"
-  printf "%-20s %-10s %-10s\n" $ID "$VENDOR" "$MODEL"
+  printf "%-20s %-10s %-10s\n\n" $ID "$VENDOR" "$MODEL"
 
-  printf "\nConfiguration Notes\n"
+  printf "${YELLOW}RADIO CONFIGURATION NOTES\n"
   cat ${ACTIVE_RADIO} | jq -r '.notes[] | "* \(.)"'
+  echo -e "${NC}"
 
   
-  printf "\n** Plug in radio. If already connected, reconnect it.\n"
+  printf "${GREEN}REQUIRED ACTIONS\n"
+  printf "1. Apply the settings above to your radio.\n"
+  printf "2. Plug in the USB cable for your radio. If it is already connected, reconnect it.\n"
+  printf "3. Run 'et-mode' and select the desired mode of operation.\n\n"
+  printf "   Note: JS8Call does not require a mode to be selected.\n"
+  echo -e "${NC}"
 else
   echo "No radio selected."
 fi

From 952c3bb4e5b322562d860cc16242c2eec2f1bb97 Mon Sep 17 00:00:00 2001
From: Gaston Gonzalez <info@thetechprepper.com>
Date: Sun, 10 Nov 2024 10:44:25 -0700
Subject: [PATCH 3/3] QRP Labs QMX - Added support for audio PnP

---
 overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules        | 9 +++++++--
 overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules b/overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules
index 32faa20..e152a77 100644
--- a/overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules
+++ b/overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules
@@ -1,5 +1,6 @@
 # Author   : Gaston Gonzalez
 # Date     : 12 October 2024
+# Updated  : 10 November 2024
 # Purpose  : udev rules for the QRP Labs QMX 
 #
 # Preconditions:
@@ -7,7 +8,8 @@
 #
 # Postconditions:
 # 1. /dev/et-cat created
-# 2. rigctld started
+# 2. /dev/et-audio created
+# 3. rigctld started
 
 # Detect ET_DEVICE early and use for rules that follow
 KERNEL=="ttyACM[0-9]*", SUBSYSTEM=="tty", ATTRS{product}=="QMX*", \
@@ -19,4 +21,7 @@ ENV{ET_DEVICE}=="QMX", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a34c", \
     ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
     RUN+="/usr/bin/systemctl start rigctld"
 
-# TODO: Add sound card support
+SUBSYSTEM=="sound", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a34c", ATTRS{manufacturer}=="QRP Labs", ENV{ET_DEVICE}=="", \
+    ACTION=="add", \
+    ATTR{id}="ET_AUDIO", \
+    ENV{ET_DEVICE}="QMX", ENV{ET_SUBDEVICE}="AUDIO", GROUP="audio", MODE="0660", SYMLINK+="et-audio"
diff --git a/overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json b/overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json
index 4242886..d9ea979 100644
--- a/overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json
+++ b/overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json
@@ -8,6 +8,6 @@
     "ptt": "RIG"
   },
   "notes": [
-    "The QMX uses the Kenwood TS-440 CAT control driver"
+    "This is device is purely plug-and-play and requires no changes."
   ]
 }