et-bbs-server - Added initial et-bbs-server wrapper script a minimum configuration. Not yet tested.

overlay/opt/emcomm-tools/bin/et-bbs-server

@@ -0,0 +1,90 @@
+#!/bin/bash
+#
+# Author  : Gaston Gonzalez
+# Date    : 25 March 2025
+# Purpose : Wrapper script for starting the BBS with PnP support
+#
+# Preconditions:
+# 1. Supported radio and audio interface are connected and properly detected
+#
+# Postconditions:
+# 1. Dire Wolf is started in 1200 baud packet mode
+# 2. LinBPQ is started
+source /opt/emcomm-tools/bin/et-common
+
+BBS_CONF_DIR=${HOME}/.local/share/emcomm-tools/bbs-server
+BBS_CONF_FILE=${BBS_CONF_DIR}/bpq32.conf
+BBS_CONF_FILE_TEMPLATE=/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.conf
+
+usage() {
+  echo "usage: $(basename $0) <command>"
+  echo "  <command>"
+  echo "    start           - Start BBS"
+  echo "    update-config   - Update configuration"
+}
+
+if [[ $# -ne 1 ]]; then
+  usage
+  exit 1
+fi
+
+start() {
+  update-config
+  
+  if [[ $? -eq 0 ]]; then
+
+    PS_OUT=$(ps -ef | grep [d]irewolf)
+    if [[ $? -ne 0 ]]; then
+      echo -e "${RED}Can't start BBS. Dire Wolf not running.${NC}"
+      exit 1
+    fi
+
+    CWD_DIR=$(pwd)
+
+    cd ${BBS_CONF_DIR}
+    CMD="linbpq"
+    et-log "Starting LinBPQ in ${BBS_CONF_DIR} with: ${CMD}"
+
+    ${CMD}
+
+    cd ${CWD_DIR}
+
+  else 
+    et-log "Error updating configuration. Can't start BBS"
+    exit 1
+  fi
+}
+
+update-config () {
+
+    [ -z "$ET_USER_CONFIG" ] && ET_USER_CONFIG="${HOME}/.config/emcomm-tools/user.json"
+
+    CALLSIGN=$(cat ${ET_USER_CONFIG} | jq -r .callsign)
+    GRID=$(cat ${ET_USER_CONFIG} | jq -r .grid)
+    WINLINK_PASSWD=$(cat ${ET_USER_CONFIG} | jq -r .winlinkPasswd)
+
+    if [[ "${CALLSIGN}" = "N0CALL" ]]; then
+      echo -e "${RED}Can't start BBS. No callsign set. Run: ${WHITE}et-user${NC}."
+      exit 1
+    fi
+
+    echo "Updating BBS configuration: ${BBS_CONF_FILE}..."
+    cp -v ${BBS_CONF_FILE_TEMPLATE} ${BBS_CONF_FILE}
+    sed -i "s|{{ET_CALLSIGN}}|${CALLSIGN}|g" ${BBS_CONF_FILE}
+    sed -i "s|{{ET_WINLINK_PASSWD}}|${WINLINK_PASSWD}|g" ${BBS_CONF_FILE}
+    sed -i "s|{{ET_GRID}}|${GRID}|g" ${BBS_CONF_FILE}
+}
+
+case $1 in
+  start)
+    start
+    ;;
+  update-config)
+    update-config
+    ;;
+  *)
+    echo "Invalid command."
+    usage
+    exit 1
+  ;;
+esac

overlay/opt/emcomm-tools/conf/template.d/bbs/bpq32.simple.conf

@@ -0,0 +1,96 @@
+SIMPLE
+LOCATOR={{{{ET_GRID}}
+NODECALL={{ET_CALLSIGN}}-7
+NODEALIAS=ETCNDE
+
+CTEXT:
+ _____ _____ ____ ____  ____ ____  
+| ____|_   _/ ___| __ )| __ ) ___| 
+|  _|   | || |   |  _ \|  _ \___ \ 
+| |___  | || |___| |_) | |_) |__) |
+|_____| |_| \____|____/|____/____/ 
+
+Command  Description
+?        Show help
+BBS      Connect to BBS
+CHAT     Chat with other users
+INFO     Contact information
+***
+
+FULL_CTEXT=1
+
+BTEXT:
+{{ET_CALLSIGN}} ETC BPQ node
+***
+
+BTINTERVAL=15
+
+IDMSG:
+{{ET_CALLSIGN}}-7 Network node (ETC BPQ)
+***
+
+INFOMSG:
+Welcome to the ETC BPQ node in {{ET_GRID}}.
+***
+
+MAPCOMMENT={{ET_CALLSIGN}} ETC BPQ Node
+
+IDINTERVAL=15
+NODESINTERVAL=25
+
+PORT
+  PORTNUM=1
+  ID=1200 baud packet
+  TYPE=ASYNC
+  PROTOCOL=KISS            ; Use KISS for the 1200 baud packet port
+  IPADDR=127.0.0.1         ; Connect to direwolf on this host
+  TCPPORT=8001	           ; Connect to direwolf on the KISS TCP port
+  CHANNEL=A                ; single channel TNC
+  NOKEEPALIVES=0
+  PERSIST=160
+  SLOTTIME=180
+  TXDELAY=270              ; The TX delay in milliseconds
+  TXTAIL=23                ; The TX tail delay in millisconds
+  QUALITY=203              ; Quality factor applied to node broadcasts
+  MINQUAL=201              ; Entries in the nodes table with qualities
+                           ; greater or equal to MINQUAL will be sent on
+                           ; this port. A value of 0 sends everything.
+  MAXFRAME=6               ; Max outstanding frames (1 thru 7)
+  FRACK=5000               ; Level 2 timout in milliseconds
+  RESPTIME=1000            ; Level 2 delayed ack timer in milliseconds
+  RETRIES=100              ; Level 2 maximum retry value
+  PACLEN=236               ; Default max packet length for this port
+  UNPROTO=FBB              ; BTEXT broadcast addrs format:
+                           ; DEST[,digi1[,digi2]]
+  L3ONLY=0                 ; 1=No user downlink connects on this port
+  DIGIFLAG=1               ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
+  DIGIPORT=0               ; Port on which to send digi'd frames
+  USERS=0                  ; Maximum number of L2 sessions, 0 = no limit
+ENDPORT
+
+PORT
+  PORTNUM=2
+  ID=Telnet
+  DRIVER=Telnet
+  QUALITY=0
+  CONFIG
+  CMS=1
+  CMSCALL={{ET_CALLSIGN}}
+  CMSPASS=
+  RELAYAPPL=BBS
+  SECURETELNET=1
+  LOGGING=1
+  DisconnectOnClose=0
+  TCPPORT=8010
+  HTTPPORT=8012
+  LOGINPROMPT=user:
+  PASSWORDPROMPT=password:
+  MAXSESSIONS=15
+  CTEXT=Welcome to {{ET_CALLSIGN}}'s Telnet Server\nEnter ? for list of commands\n\n
+  USER=admin,{{ET_WINLINK_PASSWD}},{{ET_CALLSIGN}},"",sysop
+ENDPORT
+
+APPLICATION 1,BBS,,{{ET_CALLSIGN}}-11,ETCBBS,255
+APPLICATION 2,CHAT,,{{ET_CALLSIGN}}-12,ETCCHT,255
+LINMAIL
+LINCHAT