From ea5207e25e59e0ccc200f58016abb0a59741b824 Mon Sep 17 00:00:00 2001
From: thetechprepper <info@thetechprepper.com>
Date: Wed, 1 Oct 2025 16:31:42 -0700
Subject: [PATCH] fldigi - Added stock configuration with only callsign token

---
 overlay/etc/skel/.config/JS8Call.ini    |    2 +-
 overlay/etc/skel/.fldigi/fldigi_def.xml | 3457 +++++++++++++++++++++++
 2 files changed, 3458 insertions(+), 1 deletion(-)
 create mode 100644 overlay/etc/skel/.fldigi/fldigi_def.xml

diff --git a/overlay/etc/skel/.config/JS8Call.ini b/overlay/etc/skel/.config/JS8Call.ini
index 30e6484..f918f2b 100644
--- a/overlay/etc/skel/.config/JS8Call.ini
+++ b/overlay/etc/skel/.config/JS8Call.ini
@@ -17,7 +17,7 @@ Miles=true
 MyCall=N0CALL
 MyGrid=DM33
 MyGroups=@@TTP,@@TTPNET
-MyInfo=ETC R3
+MyInfo=ETC R5
 Polling=1
 PSKReporter=false
 PTTMethod=@Variant(\0\0\0\x7f\0\0\0\x1eTransceiverFactory::PTTMethod\0\0\0\0\xfPTT_method_CAT\0)
diff --git a/overlay/etc/skel/.fldigi/fldigi_def.xml b/overlay/etc/skel/.fldigi/fldigi_def.xml
new file mode 100644
index 0000000..f30f20d
--- /dev/null
+++ b/overlay/etc/skel/.fldigi/fldigi_def.xml
@@ -0,0 +1,3457 @@
+<FLDIGI_DEFS>
+
+<!-- type: bool; default: true
+Ensure user wants to leave flgidi -->
+<CONFIRMEXIT>1</CONFIRMEXIT>
+
+<!-- type: bool; default: true
+Show tx timer on menu bar -->
+<SHOW_TX_TIMER>1</SHOW_TX_TIMER>
+
+<!-- type: int; default: 5
+TX deadman timeout in minutes -->
+<TX_TIMEOUT>5</TX_TIMEOUT>
+
+<!-- type: bool; default: true
+Save current configuration on exit -->
+<SAVECONFIG>1</SAVECONFIG>
+
+<!-- type: bool; default: false
+Noise test on/off -->
+<NOISETEST>0</NOISETEST>
+
+<!-- type: double; default: +20.0
+Signal to Noise ratio for test -->
+<SIGNAL2NOISE>20</SIGNAL2NOISE>
+
+<!-- type: bool; default: false
+RSID detector searches the entire passband -->
+<RSIDWIDESEARCH>0</RSIDWIDESEARCH>
+
+<!-- type: int; default: 5
+RSID detection opens squelch for nn seconds -->
+<RSIDSQUELCH>5</RSIDSQUELCH>
+
+<!-- type: int; default: 200
+RSID minimum search bandwidth in Hertz -->
+<RSID_MIN_BW>200</RSID_MIN_BW>
+
+<!-- type: bool; default: false
+Enable Reed Soloman ID decoding -->
+<RECEIVERSID>0</RECEIVERSID>
+
+<!-- type: bool; default: false
+Send RSID at beginning and end of transmission -->
+<TRANSMITRSID>0</TRANSMITRSID>
+
+<!-- type: bool; default: true
+Append marker (for the previous modem and frequency) to the RX text
+widget before changing to the new modem and/or frequency -->
+<RSIDMARK>1</RSIDMARK>
+
+<!-- type: bool; default: false
+Trigger RSID notifications but do not change modem and frequency -->
+<RSIDNOTIFYONLY>0</RSIDNOTIFYONLY>
+
+<!-- type: bool; default: false
+restore squelch upon decode of RSID_EOT signal -->
+<RSIDEOTSQUELCH>0</RSIDEOTSQUELCH>
+
+<!-- type: bool; default: false
+Disable RSID detection when RsID signal is detected -->
+<RSIDAUTODISABLE>0</RSIDAUTODISABLE>
+
+<!-- type: bool; default: false
+Transmit an RSID signal when modem data is concluded -->
+<RSIDPOST>0</RSIDPOST>
+
+<!-- type: mode_set_t; default: mode_set_t()
+Mode names for which RSID reception is disabled -->
+<RSIDRXMODESEXCLUDE>,</RSIDRXMODESEXCLUDE>
+
+<!-- type: mode_set_t; default: mode_set_t()
+Mode names for which RSID transmission is disabled -->
+<RSIDTXMODESEXCLUDE>CW,BPSK-31,RTTY,,</RSIDTXMODESEXCLUDE>
+
+<!-- type: int; default: 1
+values (low, medium, high)  0, 1, 2 -->
+<RSID_ERRORS>1</RSID_ERRORS>
+
+<!-- type: bool; default: false
+disable displaying the rsid warning dialog box -->
+<DISABLE_RSID_WARNING_DIALOG_BOX>0</DISABLE_RSID_WARNING_DIALOG_BOX>
+
+<!-- type: bool; default: true
+Disable expensive processing in some decoders -->
+<SLOWCPU>0</SLOWCPU>
+
+<!-- type: bool; default: false
+disable changing frequency on rsid modem change/reset -->
+<DISABLERSIDFREQCHANGE>0</DISABLERSIDFREQCHANGE>
+
+<!-- type: bool; default: true
+retain frequency lock on rsid modem change/reset -->
+<RETAINFREQLOCK>1</RETAINFREQLOCK>
+
+<!-- type: double; default: -60.0
+Input signal level transition (dB); -90 to 0 -->
+<normal_signal_level>-60</normal_signal_level>
+
+<!-- type: double; default: -6.0
+Input signal level transition (dB); -90 to 0 -->
+<high_signal_level>-6</high_signal_level>
+
+<!-- type: double; default: -3.0
+Input signal level transition (dB); -90 to 0 -->
+<over_signal_level>-3</over_signal_level>
+
+<!-- type: bool; default: false
+Enable if WSJTX metering desired -->
+<use_wsjtx_vumeter_scale>0</use_wsjtx_vumeter_scale>
+
+<!-- type: double; default: 0.0
+Waterfall reference level (dB) -->
+<WFREFLEVEL>0</WFREFLEVEL>
+
+<!-- type: double; default: 60.0
+Waterfall amplitude span (dB) -->
+<WFAMPSPAN>60</WFAMPSPAN>
+
+<!-- type: bool; default: true
+WF_UI - enable reverse button -->
+<WF_UIREV>1</WF_UIREV>
+
+<!-- type: bool; default: true
+WF_UI - enable scale multiplication button -->
+<WF_UIX1>1</WF_UIX1>
+
+<!-- type: int; default: 8
+DROP_SPEED - slow rate waterfall drop speed -->
+<DROP_SPEED>8</DROP_SPEED>
+
+<!-- type: bool; default: true
+WF_UI - enable wf carrier button -->
+<WF_UIWFCARRIER>1</WF_UIWFCARRIER>
+
+<!-- type: bool; default: true
+WF_UI - enable wf shift buttons -->
+<WF_UIWFSHIFT>1</WF_UIWFSHIFT>
+
+<!-- type: bool; default: true
+WF_UI - enable rf level and range controls -->
+<WF_UIWFREFLEVEL>1</WF_UIWFREFLEVEL>
+
+<!-- type: bool; default: true
+WF_UI - enable wf drop rate control -->
+<WF_UIWFDROP>1</WF_UIWFDROP>
+
+<!-- type: bool; default: true
+WF_UI - enable wf amp span control -->
+<WF_UIWFAMPSPAN>1</WF_UIWFAMPSPAN>
+
+<!-- type: bool; default: true
+WF_UI - enable wf memory store button -->
+<WF_UIWFSTORE>1</WF_UIWFSTORE>
+
+<!-- type: bool; default: true
+WF_UI - enable wf mode control -->
+<WF_UIWFMODE>1</WF_UIWFMODE>
+
+<!-- type: bool; default: true
+WF_UI - enable wf qsy button -->
+<WF_UIQSY>1</WF_UIQSY>
+
+<!-- type: bool; default: true
+WF_UI - enable wf transmit lock button -->
+<WF_UIXMTLOCK>1</WF_UIXMTLOCK>
+
+<!-- type: int; default: 0
+Lowest frequency shown on waterfall (Hz) -->
+<LOWFREQCUTOFF>0</LOWFREQCUTOFF>
+
+<!-- type: int; default: 3000
+Highest frequency shown on waterfall (Hz) -->
+<HIGHFREQCUTOFF>3000</HIGHFREQCUTOFF>
+
+<!-- type: double; default: 1500
+Default CW tracking point (Hz) -->
+<CWSWEETSPOT>1500</CWSWEETSPOT>
+
+<!-- type: double; default: 1500
+Default RTTY tracking point (Hz) -->
+<RTTYSWEETSPOT>1500</RTTYSWEETSPOT>
+
+<!-- type: double; default: 1500
+Default tracking point for all other modems (Hz) -->
+<PSKSWEETSPOT>1500</PSKSWEETSPOT>
+
+<!-- type: bool; default: true
+Always start new modems at sweet spot frequencies -->
+<STARTATSWEETSPOT>1</STARTATSWEETSPOT>
+
+<!-- type: int; default: 100
+(1 - cos(x)) shaping of signal start over SoftStart milliseconds -->
+<SOFTSTART>100</SOFTSTART>
+
+<!-- type: bool; default: true
+Enable for DOMINOEX modems -->
+<SOFTDOMINOEX>1</SOFTDOMINOEX>
+
+<!-- type: bool; default: false
+Enable for PSK modems -->
+<SOFTPSK>0</SOFTPSK>
+
+<!-- type: bool; default: true
+Enable for MFSK modems -->
+<SOFTMFSK>1</SOFTMFSK>
+
+<!-- type: bool; default: false
+Enable for RTTY modems -->
+<SOFTRTTY>0</SOFTRTTY>
+
+<!-- type: bool; default: true
+Enable for THOR modems -->
+<SOFTTHOR>1</SOFTTHOR>
+
+<!-- type: bool; default: false
+Select if waterfall should compensate for BFO offset in CW -->
+<CWOFFSET>0</CWOFFSET>
+
+<!-- type: bool; default: false
+Select if BFO is injected as LSB instead of USB -->
+<CWISLSB>0</CWISLSB>
+
+<!-- type: bool; default: true
+encode/decode backslash character -->
+<CW_blackslash>1</CW_blackslash>
+
+<!-- type: bool; default: true
+encode/decode apostrophe character -->
+<CW_apostrophe>1</CW_apostrophe>
+
+<!-- type: bool; default: true
+encode/decode quote character -->
+<CW_quote>1</CW_quote>
+
+<!-- type: bool; default: true
+encode/decode dollar_sign character -->
+<CW_dollar_sign>1</CW_dollar_sign>
+
+<!-- type: bool; default: true
+encode/decode open_paren character -->
+<CW_open_paren>1</CW_open_paren>
+
+<!-- type: bool; default: true
+encode/decode close_paren character -->
+<CW_close_paren>1</CW_close_paren>
+
+<!-- type: bool; default: true
+encode/decode colon character -->
+<CW_colon>1</CW_colon>
+
+<!-- type: bool; default: true
+encode/decode semi_colon character -->
+<CW_semi_colon>1</CW_semi_colon>
+
+<!-- type: bool; default: true
+encode/decode underscore character -->
+<CW_underscore>1</CW_underscore>
+
+<!-- type: bool; default: true
+encode/decode at_symbol character -->
+<CW_at_symbol>1</CW_at_symbol>
+
+<!-- type: bool; default: true
+encode/decode exclamation character -->
+<CW_exclamation>1</CW_exclamation>
+
+<!-- type: int; default: '*'
+use CW_noise character to display invalid CW decodes -->
+<CW_noise>42</CW_noise>
+
+<!-- type: std::string; default: &quot;&quot;
+Independent serial port used for keying DTR or RTS as keyline -->
+<CW_KEYLINE_SERIAL_PORT_NAME></CW_KEYLINE_SERIAL_PORT_NAME>
+
+<!-- type: int; default: 0
+0 - none, 1 - RTS, 2 - DTR -->
+<CWKEYLINE>0</CWKEYLINE>
+
+<!-- type: bool; default: 0
+0 - false, 1 - true; Kenwood xcvrs -->
+<USE_KYWDKEYING>0</USE_KYWDKEYING>
+
+<!-- type: bool; default: 0
+0 - false, 1 - true; Elecraft xcvrs -->
+<USE_ELCTKEYING>0</USE_ELCTKEYING>
+
+<!-- type: bool; default: 0
+0 - false, 1 - true -->
+<USE_ICOMKEYING>0</USE_ICOMKEYING>
+
+<!-- type: std::string; default: &quot;&quot;
+Icom transceiver CIV address -->
+<ICOMcivaddr></ICOMcivaddr>
+
+<!-- type: bool; default: 0
+0 - false, 1 - true -->
+<USE_YAESUKEYING>0</USE_YAESUKEYING>
+
+<!-- type: int; default: 0
+compensate delays in CW CAT keying (msecs) -->
+<CATKEYINGCOMP>0</CATKEYINGCOMP>
+
+<!-- type: bool; default: 0
+disable CAT ptt for text string CW -->
+<CATKEYING_disable_ptt>0</CATKEYING_disable_ptt>
+
+<!-- type: int; default: 0
+compensate delays in set/clr DTR/RTS serial line
+most likely required for Windows operating system
+compensation value in msec -->
+<cwio_comp>0</cwio_comp>
+
+<!-- type: int; default: 0
+flrig DTR/RTS keying -->
+<use_FLRIGkeying>0</use_FLRIGkeying>
+
+<!-- type: int; default: 0
+0 - none, 1 - RTS, 2 - DTR -->
+<PTTKEYLINE>0</PTTKEYLINE>
+
+<!-- type: bool; default: 0
+serial keyline parameter changed -->
+<CW_KEYLINE_CHANGED>0</CW_KEYLINE_CHANGED>
+
+<!-- type: bool; default: false
+DTR/RTS keying shares RigCat serial port -->
+<CW_KEYLINE_on_cat_port>0</CW_KEYLINE_on_cat_port>
+
+<!-- type: bool; default: false
+DTR/RTS keying shares ptt serial port
+Note: ptt on DTR, keying on RTS or
+      ptt on RTS, keying on DTR -->
+<CW_KEYLINE_on_ptt_port>0</CW_KEYLINE_on_ptt_port>
+
+<!-- type: double; default: 0.0
+Dot to Space ratio compensate for transceiver keying delays
+in millisecond. (-) decrease dot, (+) increase dot
+limited to 1/2 default dot / space interval -->
+<CWkeycomp>0</CWkeycomp>
+
+<!-- type: bool; default: false
+Replay audio history when changing frequency by clicking on
+the waterfall -->
+<WATERFALLHISTORYDEFAULT>0</WATERFALLHISTORYDEFAULT>
+
+<!-- type: bool; default: false
+Change rig frequency by dragging the mouse cursor on the waterfall
+frequency scale area -->
+<WATERFALLQSY>0</WATERFALLQSY>
+
+<!-- type: bool; default: false
+Insert text to the RX text widget when changing frequency by left
+clicking on the waterfall -->
+<WATERFALLCLICKINSERT>0</WATERFALLCLICKINSERT>
+
+<!-- type: std::string; default: &quot;\n&lt;FREQ&gt;\n&quot;
+Waterfall left click text for WATERFALLCLICKINSERT -->
+<WATERFALLCLICKTEXT>
+&lt;FREQ&gt;
+</WATERFALLCLICKTEXT>
+
+<!-- type: int; default: waterfall::WF_CARRIER
+Describes how waterfall mouse wheel events are handled
+  0: do nothing; 1: change AFC width or decoder bandwidth;
+  2: signal search; 3: change squelch level; 4: change modem carrier;
+  5: change modem; 6: scroll visible area.  The default is 4. -->
+<WATERFALLWHEELACTION>4</WATERFALLWHEELACTION>
+
+<!-- type: bool; default: false
+Print Rx in lowercase for CW, RTTY, CONTESTIA and THROB -->
+<RX_LOWERCASE>0</RX_LOWERCASE>
+
+<!-- type: bool; default: false
+Transmit all text in lowercase -->
+<TX_LOWERCASE>0</TX_LOWERCASE>
+
+<!-- type: int; default: 0
+0 - PskCore filter
+1 - Raised cosine / sinc filter
+2 - G3PLX (gmfsk) filter -->
+<PSKFILTER>0</PSKFILTER>
+
+<!-- type: bool; default: true
+Enable psk multi-channel detector - disable for very slow cpus -->
+<PSKBROWSER_ON>1</PSKBROWSER_ON>
+
+<!-- type: int; default: 50
+PSK signal acquisition search range (Hz) -->
+<PSKSEARCHRANGE>50</PSKSEARCHRANGE>
+
+<!-- type: bool; default: false
+Vestigial pilot tone on = 1, off = 0 -->
+<PSKPILOT>0</PSKPILOT>
+
+<!-- type: double; default: -30.0
+Pilot tone relative power level -->
+<PILOT_POWER>-30</PILOT_POWER>
+
+<!-- type: double; default: 9.0
+PSK signal acquisition S/N (dB) -->
+<ACQSN>9</ACQSN>
+
+<!-- type: bool; default: false
+Send s2n report to pskmail client/server -->
+<PSKMAILS2NREPORT>0</PSKMAILS2NREPORT>
+
+<!-- type: bool; default: true
+Behaviour of status (S/N and IMD) fields:
+  0: Clear after timeout
+  1: Dim after timeout
+ -->
+<STATUSDIM>1</STATUSDIM>
+
+<!-- type: double; default: 15.0
+Dim or Clear timeout (seconds) -->
+<STATUSTIMEOUT>15</STATUSTIMEOUT>
+
+<!-- type: bool; default: false
+Reset to carrier when no signal is present -->
+<PSKMAILSWEETSPOT>0</PSKMAILSWEETSPOT>
+
+<!-- type: int; default: 50
+Listen for signals within this range (Hz) -->
+<PSKSERVEROFFSET>50</PSKSERVEROFFSET>
+
+<!-- type: int; default: 1500
+Default PSKMail listen / transmit frequency -->
+<PSKSERVERCARRIER>1500</PSKSERVERCARRIER>
+
+<!-- type: int; default: 25
+Limit AFC movement to this range (Hz) -->
+<PSKSERVERAFCRANGE>25</PSKSERVERAFCRANGE>
+
+<!-- type: double; default: 9.0
+Acquisition S/N (dB) -->
+<PSKSERVERACGSN>9</PSKSERVERACGSN>
+
+<!-- type: int; default: 1
+1 - use Kahn power demodulator
+0 - use ATC (Kok Chen) demodulator -->
+<KAHNDEMOD>1</KAHNDEMOD>
+
+<!-- type: bool; default: true
+Enabled  - XY scope displays Mark/Space channel signals
+Disabled - XY scope displays pseudo M/S signals -->
+<TRUESCOPE>1</TRUESCOPE>
+
+<!-- type: int; default: 3
+Carrier shift (Hz). Values are as follows:
+  0: 23; 1: 85; 2: 160; 3: 170; 4: 182; 5: 200; 6: 240; 7: 350;
+  8: 425; 9: 850; -1: custom -->
+<RTTYSHIFT>3</RTTYSHIFT>
+
+<!-- type: int; default: 450
+Custom shift (Hz) -->
+<RTTYCUSTOMSHIFT>450</RTTYCUSTOMSHIFT>
+
+<!-- type: double; default: 68.0
+Receive filter bandwidth (Hz) -->
+<RTTYBW>68</RTTYBW>
+
+<!-- type: int; default: 0
+Selective decoding of mark/space tones
+0 - both
+1 - mark only
+2 - space only -->
+<RTTYCWI>0</RTTYCWI>
+
+<!-- type: double; default: 1.25
+Rtty Rx Filter shape factor, K * (t/T)
+You may alter this value using a text editor
+change will be effective when restarting fldigi
+K = 1.25; best for W1HKJ (default)
+K = 1.5 - best for DO2SMF -->
+<RTTYFILTER>1.25</RTTYFILTER>
+
+<!-- type: int; default: 0
+Carrier baud rate. Values are as follows:
+  1: 45; 1: 45.45; 2: 50; 3: 56; 4: 75; 5: 100; 6: 110; 7: 150; 
+  8: 200; 9: 300 -->
+<RTTYBAUD>0</RTTYBAUD>
+
+<!-- type: int; default: 0
+Bits per character. Values are as follows:
+  0: 5 (baudot); 1: 7 (ascii); 2: 8 (ascii) -->
+<RTTYBITS>0</RTTYBITS>
+
+<!-- type: int; default: rtty::RTTY_PARITY_NONE
+Parity. Values are as folows:
+  0: none; 1: even; 2: odd: 3: zero; 4: one -->
+<RTTYPARITY>0</RTTYPARITY>
+
+<!-- type: int; default: 1
+Stop bits. Values are as folows:
+  0: 1; 1: 1.5; 2: 2 -->
+<RTTYSTOP>1</RTTYSTOP>
+
+<!-- type: bool; default: false
+This setting is currently unused -->
+<RTTYREVERSE>0</RTTYREVERSE>
+
+<!-- type: bool; default: false
+This setting is currently unused -->
+<RTTYMSBFIRST>0</RTTYMSBFIRST>
+
+<!-- type: bool; default: false
+Use "CR CR LF" for "CR LF" -->
+<RTTYCRCLF>0</RTTYCRCLF>
+
+<!-- type: bool; default: true
+Automatically add CRLF after `page width' characters -->
+<RTTYAUTOCRLF>1</RTTYAUTOCRLF>
+
+<!-- type: int; default: 72
+Page width for RTTYAUTOCRLF -->
+<RTTYAUTOCOUNT>72</RTTYAUTOCOUNT>
+
+<!-- type: int; default: 1
+AFC tracking speed. Values are as follows:
+  0: slow; 1: normal; 2: fast -->
+<RTTYAFCSPEED>1</RTTYAFCSPEED>
+
+<!-- type: bool; default: false
+Default to crosshair digiscope -->
+<PREFERXHAIRSCOPE>0</PREFERXHAIRSCOPE>
+
+<!-- type: bool; default: false
+Generate Pseudo-FSK signal on right audio channel -->
+<PSEUDOFSK>0</PSEUDOFSK>
+
+<!-- type: bool; default: false
+Use ITA2 shift if true -->
+<ITA2>0</ITA2>
+
+<!-- type: bool; default: false
+TRUE if DTR/RTS keying for RTTY -->
+<USEFSK>0</USEFSK>
+
+<!-- type: bool; default: false
+FSK signal generator shares rigio serial port for DTR/RTS control -->
+<FSK_SHARES_PORT>0</FSK_SHARES_PORT>
+
+<!-- type: std::string; default: &quot;&quot;
+FSK serial port device name -->
+<FSK_PORT></FSK_PORT>
+
+<!-- type: bool; default: false
+Reverse Mark/Space signaling -->
+<FSK_REVERSE>0</FSK_REVERSE>
+
+<!-- type: bool; default: false
+Use DTR signal line for FSK control -->
+<FSK_ON_DTR>0</FSK_ON_DTR>
+
+<!-- type: bool; default: false
+Always send shift char before space -->
+<FSK_SHIFT_ON_SPACE>0</FSK_SHIFT_ON_SPACE>
+
+<!-- type: bool; default: true
+True - 1.5 stop bits; False - 2 stop bits -->
+<FSK_STOPBITS>1</FSK_STOPBITS>
+
+<!-- type: bool; default: false
+True - enable; False - disable -->
+<FLRIG_FSK>0</FLRIG_FSK>
+
+<!-- type: double; default: 200
+range 50 to 5000 msecs -->
+<FLRIG_POLL>200</FLRIG_POLL>
+
+<!-- type: bool; default: true
+Enable kml server threads -->
+<KMLSERVER_ENABLED>1</KMLSERVER_ENABLED>
+
+<!-- type: bool; default: false
+Decoding of Synop weather information on RTTY to ADIF log -->
+<SYNOPADIFDECODING>0</SYNOPADIFDECODING>
+
+<!-- type: bool; default: false
+Decoding of Synop weather information on RTTY to KML file -->
+<SYNOPKMLDECODING>0</SYNOPKMLDECODING>
+
+<!-- type: bool; default: false
+Decoding of Synop interleaved with coded text, or replaces it -->
+<SYNOPINTERLEAVED>0</SYNOPINTERLEAVED>
+
+<!-- type: bool; default: true
+Revert to unshifted chars on a space (RX) -->
+<UOSRX>1</UOSRX>
+
+<!-- type: bool; default: true
+Revert to unshifted chars on a space (TX) -->
+<UOSTX>1</UOSTX>
+
+<!-- type: bool; default: true
+Use MARK frequency for logging -->
+<USEMARKFREQ>1</USEMARKFREQ>
+
+<!-- type: bool; default: true
+Show <BEL> in Rx panel when  decoded -->
+<visibleBELL>1</visibleBELL>
+
+<!-- type: bool; default: true
+Ring TTY bell tone when  decoded -->
+<audibleBELL>1</audibleBELL>
+
+<!-- type: double; default: 18
+Transmit speed (WPM) -->
+<CWSPEED>18</CWSPEED>
+
+<!-- type: double; default: 15
+Speed for Farnsworth timing (WPM) -->
+<CWFARNSWORTH>15</CWFARNSWORTH>
+
+<!-- type: bool; default: false
+Use Farnsworth timing -->
+<CWUSEFARNSWORTH>0</CWUSEFARNSWORTH>
+
+<!-- type: double; default: 15
+Speed for wordsworth timing (WPM) -->
+<CWWORDSWORTH>15</CWWORDSWORTH>
+
+<!-- type: bool; default: false
+Use Wordsworth timing -->
+<CWUSEWORDSWORTH>0</CWUSEWORDSWORTH>
+
+<!-- type: double; default: 24
+Default speed (WPM) -->
+<CWDEFSPEED>24</CWDEFSPEED>
+
+<!-- type: int; default: 150
+Filter bandwidth (Hz) -->
+<CWBANDWIDTH>150</CWBANDWIDTH>
+
+<!-- type: int; default: 2
+CW FIR receive filter length in samples; 0=128, 1=256, 2=512, 3=1024 -->
+<CWFILLEN>2</CWFILLEN>
+
+<!-- type: double; default: 0.4
+Detector hysterisis, lower threshold -->
+<CWLOWER>0.4</CWLOWER>
+
+<!-- type: double; default: 0.6
+Detector hysterisis, upper threshold -->
+<CWUPPER>0.6</CWUPPER>
+
+<!-- type: int; default: 100
+Matched Filter length -->
+<CWMFILTLEN>100</CWMFILTLEN>
+
+<!-- type: bool; default: true
+Automatic receive speed tracking -->
+<CWTRACK>1</CWTRACK>
+
+<!-- type: bool; default: false
+Matched Filter in use -->
+<CWMFILT>0</CWMFILT>
+
+<!-- type: bool; default: false
+Self Organizing Map decoding -->
+<CWUSESOMDECODING>0</CWUSESOMDECODING>
+
+<!-- type: int; default: 10
+Tracking range for CWTRACK (WPM) -->
+<CWRANGE>10</CWRANGE>
+
+<!-- type: int; default: 5
+Lower RX limit (WPM) -->
+<CWLOWERLIMIT>5</CWLOWERLIMIT>
+
+<!-- type: int; default: 50
+Upper TX limit (WPM) -->
+<CWUPPERLIMIT>50</CWUPPERLIMIT>
+
+<!-- type: int; default: 1
+rx squelch attack timing
+SLOW = 0 (100)
+MEDIUM = 1 (50)
+FAST = 2 (25) -->
+<CWRX_ATTACK>1</CWRX_ATTACK>
+
+<!-- type: int; default: 1
+rx squelch decay timing
+SLOW = 0 (1000)
+MEDIUM = 1 (500)
+FAST = 2 (250) -->
+<CWRX_DECAY>1</CWRX_DECAY>
+
+<!-- type: double; default: 3.0
+Dash to dot ratio -->
+<CWDASH2DOT>3</CWDASH2DOT>
+
+<!-- type: double; default: 0.0
+Add 'weight' to CW elements -->
+<CWWEIGHT>0</CWWEIGHT>
+
+<!-- type: bool; default: true
+Show additional control bar for CW, at bottom of main dialog -->
+<SHOWCWCONTROLS>1</SHOWCWCONTROLS>
+
+<!-- type: bool; default: false
+Generate QSK signal on right audio channel -->
+<QSK>0</QSK>
+
+<!-- type: double; default: 2000
+QSK square wave fundamental frequency -->
+<QSKfrequency>2000</QSKfrequency>
+
+<!-- type: double; default: 4.0
+Pre-keydown timing (milliseconds) -->
+<CWPRE>4</CWPRE>
+
+<!-- type: double; default: 0.8
+Right channel QSK signal amplitude -->
+<QSKAMP>0.8</QSKAMP>
+
+<!-- type: double; default: 4.0
+Post-keydown timing (milliseconds) -->
+<CWPOST>4</CWPOST>
+
+<!-- type: bool; default: false
+Send callsign in CW at the end of every transmission -->
+<CWID>0</CWID>
+
+<!-- type: int; default: 18
+CW ID speed (WPM) -->
+<IDWPM>18</IDWPM>
+
+<!-- type: mode_set_t; default: mode_set_t()
+Mode names for which CWID transmission is disabled -->
+<CWIDMODESEXCLUDE>CW,,</CWIDMODESEXCLUDE>
+
+<!-- type: bool; default: false
+Send a continuous stream of test characters as the QSK signal -->
+<QSKADJUST>0</QSKADJUST>
+
+<!-- type: int; default: 0
+Test character for QSKADJUST (ASCII value) -->
+<TESTCHAR>0</TESTCHAR>
+
+<!-- type: int; default: 0
+QSK edge shape. Values are as follows:
+  0: Hanning; 1: Blackman;Raised cosine = Hanning. -->
+<QSKSHAPE>0</QSKSHAPE>
+
+<!-- type: double; default: 4.0
+Leading and trailing edge rise times (milliseconds) -->
+<QSKrisetime>4</QSKrisetime>
+
+<!-- type: double; default: 4.0
+Leading and trailing edge rise times (milliseconds) -->
+<CWRISETIME>4</CWRISETIME>
+
+<!-- type: bool; default: false
+Enable filtering of transmit audio -->
+<CW_BPF_ON>0</CW_BPF_ON>
+
+<!-- type: double; default: 100.0
+Transmit filter hi cutoff frequency
+f0 +/- CW_bpf/2 -->
+<CW_BPF>100</CW_BPF>
+
+<!-- type: bool; default: false
+Weight decreases with increasing edge timing -->
+<CWNARROW>0</CWNARROW>
+
+<!-- type: bool; default: false
+Use open paren character; typically used in MARS ops -->
+<CWUSEPAREN>0</CWUSEPAREN>
+
+<!-- type: std::string; default: &quot;=~&lt;&gt;%+&amp;{}&quot;
+CW prosigns BT AA AS AR SK KN INT HM VE -->
+<CWPROSIGNS>=~&lt;&gt;%+&amp;{}</CWPROSIGNS>
+
+<!-- type: bool; default: false
+Display decoded prosign as assigned short cut key -->
+<CW_prosign_display>0</CW_prosign_display>
+
+<!-- type: int; default: 20
+CW calibrate speed in WPM -->
+<CWCALSPEED>20</CWCALSPEED>
+
+<!-- type: bool; default: true
+Use Ä extended CW character -->
+<A_umlaut>1</A_umlaut>
+
+<!-- type: bool; default: false
+Use Æ extended CW character -->
+<A_aelig>0</A_aelig>
+
+<!-- type: bool; default: true
+Use Ä extended CW character -->
+<A_ring>1</A_ring>
+
+<!-- type: bool; default: true
+Use Ç extended CW character -->
+<C_cedilla>1</C_cedilla>
+
+<!-- type: bool; default: true
+Use È extended CW character -->
+<E_grave>1</E_grave>
+
+<!-- type: bool; default: true
+Use É extended CW character -->
+<E_acute>1</E_acute>
+
+<!-- type: bool; default: false
+Use Ó extended CW character -->
+<O_acute>0</O_acute>
+
+<!-- type: bool; default: true
+Use Ö extended CW character -->
+<O_umlaut>1</O_umlaut>
+
+<!-- type: bool; default: false
+Use Ø extended CW character -->
+<O_slash>0</O_slash>
+
+<!-- type: bool; default: true
+Use Ñ extended CW character -->
+<N_tilde>1</N_tilde>
+
+<!-- type: bool; default: true
+Use Ü extended CW character -->
+<U_umlaut>1</U_umlaut>
+
+<!-- type: bool; default: false
+Use Û extended CW character -->
+<U_circ>0</U_circ>
+
+<!-- type: bool; default: false
+Mortty loaded with K3NG WinKeyer emulator sketch -->
+<WK_K3NGsketch>0</WK_K3NGsketch>
+
+<!-- type: int; default: 0
+SCAMP Resync Frames 0-9 -->
+<SCAMPRESYNC>0</SCAMPRESYNC>
+
+<!-- type: int; default: 1
+SCAMP Repeat Frames 1-9 -->
+<SCAMPREPEAT>1</SCAMPREPEAT>
+
+<!-- type: double; default: 245.0
+Feld Hell working bandwidth -->
+<HELL_BW0>245</HELL_BW0>
+
+<!-- type: double; default: 245.0
+FH bandwidth -->
+<HELL_BW1>245</HELL_BW1>
+
+<!-- type: double; default: 30.0
+Slow Hell bandwidth -->
+<HELL_BW2>30</HELL_BW2>
+
+<!-- type: double; default: 1225.
+X5 Hell bandwidth -->
+<HELL_BW3>1225</HELL_BW3>
+
+<!-- type: double; default: 2205.0
+X9 Hell bandwidth -->
+<HELL_BW4>2205</HELL_BW4>
+
+<!-- type: double; default: 250.0
+FSKH-245 bandwidth -->
+<HELL_BW5>250</HELL_BW5>
+
+<!-- type: double; default: 120.0
+FSKH-105 Hell bandwidth -->
+<HELL_BW6>120</HELL_BW6>
+
+<!-- type: double; default: 450.0
+HELL-80 bandwidth -->
+<HELL_BW7>450</HELL_BW7>
+
+<!-- type: int; default: 2
+Horizontal size multiplier for each hell character, 1, 2, or 3 -->
+<HELLRCVWIDTH>2</HELLRCVWIDTH>
+
+<!-- type: int; default: 20
+Vertical char size in pixels -->
+<HELLRCVHEIGHT>20</HELLRCVHEIGHT>
+
+<!-- type: bool; default: false
+Display RX in reverse video -->
+<HELLBLACKBOARD>0</HELLBLACKBOARD>
+
+<!-- type: bool; default: false
+Display RX as scrolling marquee -->
+<HELLMARQUEE>0</HELLMARQUEE>
+
+<!-- type: int; default: 1
+Transmit width (number of multiple scans per character line) -->
+<HELLXMTWIDTH>1</HELLXMTWIDTH>
+
+<!-- type: bool; default: false
+Transmit periods (.) when idle -->
+<HELLXMTIDLE>0</HELLXMTIDLE>
+
+<!-- type: int; default: 1
+Raised cosine pulse shape factor. Values are as follows:
+  0: slow (4 ms)
+  1: med (2 ms)
+  2: fast (1 ms)
+  3: Hard (off) -->
+<HELLPULSEFAST>1</HELLPULSEFAST>
+
+<!-- type: int; default: 2
+1 - slow, 2 - medium, 3 - fast -->
+<HELLAGC>2</HELLAGC>
+
+<!-- type: int; default: 2
+Number of tones. Values are as follows:
+  0: 2; 1: 4; 2: 8; 3: 16; 4: 32; 5: 64; 6: 128; 7: 256 -->
+<OLIVIATONES>2</OLIVIATONES>
+
+<!-- type: int; default: 2
+Bandwidth (Hz). Values are as follows:
+  0: 125; 1: 250; 2: 500; 3: 1000; 4: 2000. -->
+<OLIVIABW>2</OLIVIABW>
+
+<!-- type: int; default: 8
+Tune margin (tone frequency spacing) -->
+<OLIVIASMARGIN>8</OLIVIASMARGIN>
+
+<!-- type: int; default: 4
+Integration period (FEC blocks) -->
+<OLIVIASINTEG>4</OLIVIASINTEG>
+
+<!-- type: bool; default: false
+Force Integration (FEC) depth to be reset when new BW/Tones selected -->
+<OLIVIARESETFEC>0</OLIVIARESETFEC>
+
+<!-- type: bool; default: true
+8-bit extended characters -->
+<OLIVIA8BIT>1</OLIVIA8BIT>
+
+<!-- type: bool; default: true
+Send start/stop tones -->
+<OLIVIASTARTTONES>1</OLIVIASTARTTONES>
+
+<!-- type: int; default: 2
+Number of tones. Values are as follows:
+  0: 2; 1: 4; 2: 8; 3: 16; 4: 32; 5: 64; 6: 128; 7: 256 -->
+<CONTESTIATONES>2</CONTESTIATONES>
+
+<!-- type: int; default: 2
+Bandwidth (Hz). Values are as follows:
+  0: 125; 1: 250; 2: 500; 3: 1000; 4: 2000. -->
+<CONTESTIABW>2</CONTESTIABW>
+
+<!-- type: int; default: 8
+Tune margin (tone frequency spacing) -->
+<CONTESTIASMARGIN>8</CONTESTIASMARGIN>
+
+<!-- type: int; default: 4
+Integration period (FEC blocks) -->
+<CONTESTIASINTEG>4</CONTESTIASINTEG>
+
+<!-- type: bool; default: true
+8-bit extended characters -->
+<CONTESTIA8BIT>1</CONTESTIA8BIT>
+
+<!-- type: bool; default: false
+Force Integration (FEC) depth to be reset when new BW/Tones selected -->
+<CONTESTIARESETFEC>0</CONTESTIARESETFEC>
+
+<!-- type: bool; default: true
+Send start/stop tones -->
+<CONTESTIASTARTTONES>1</CONTESTIASTARTTONES>
+
+<!-- type: double; default: 2.0
+Filter bandwidth factor (bandwidth relative to signal width) -->
+<THORBW>2</THORBW>
+
+<!-- type: bool; default: true
+Enable filtering before decoding -->
+<THORFILTER>1</THORFILTER>
+
+<!-- type: std::string; default: &quot;&quot;
+Secondary text (sent during keyboard idle times) -->
+<THORSECTEXT>K </THORSECTEXT>
+
+<!-- type: int; default: 5
+This setting is currently unused -->
+<THORPATHS>5</THORPATHS>
+
+<!-- type: double; default: 4.0
+Leading/trailing edge raised cosine -->
+<THOR_RISETIME>4</THOR_RISETIME>
+
+<!-- type: double; default: 0.0
+CWI threshold (CWI detection and suppression) -->
+<THORCWI>0</THORCWI>
+
+<!-- type: bool; default: true
+Detect THOR preamble (and flush Rx pipeline) -->
+<THORPREAMBLE>1</THORPREAMBLE>
+
+<!-- type: bool; default: true
+Enable Soft-symbol decoding -->
+<THORSOFTSYMBOLS>1</THORSOFTSYMBOLS>
+
+<!-- type: bool; default: true
+Enable Soft-bit decoding -->
+<THORSOFTBITS>1</THORSOFTBITS>
+
+<!-- type: bool; default: false
+No timestamps on RX packets by default -->
+<PKTRXTIMESTAMP>0</PKTRXTIMESTAMP>
+
+<!-- type: bool; default: false
+decode received Mic-E data -->
+<PKTEXPANDMICE>0</PKTEXPANDMICE>
+
+<!-- type: bool; default: false
+decode received PHG data -->
+<PKTEXPANDPHG>0</PKTEXPANDPHG>
+
+<!-- type: bool; default: false
+decode received Compressed Position data -->
+<PKTEXPANDCMP>0</PKTEXPANDCMP>
+
+<!-- type: bool; default: false
+display decoded data in SI units -->
+<PKTUNITSSI>0</PKTUNITSSI>
+
+<!-- type: bool; default: false
+display decoded data in English units -->
+<PKTUNITSENGLISH>0</PKTUNITSENGLISH>
+
+<!-- type: std::string; default: &quot;&quot;
+THOR avatar image to transmit -->
+<THOR_AVATAR_IMAGE_FILE></THOR_AVATAR_IMAGE_FILE>
+
+<!-- type: double; default: 2.0
+Filter bandwidth factor (bandwidth relative to signal width) -->
+<DOMINOEXBW>2</DOMINOEXBW>
+
+<!-- type: std::string; default: &quot;&quot;
+Secondary text (sent during keyboard idle times) -->
+<SECONDARYTEXT>K </SECONDARYTEXT>
+
+<!-- type: bool; default: true
+Enable filtering before decoding -->
+<DOMINOEXFILTER>1</DOMINOEXFILTER>
+
+<!-- type: bool; default: false
+Enable MultiPSK-compatible FEC -->
+<DOMINOEXFEC>0</DOMINOEXFEC>
+
+<!-- type: int; default: 5
+This setting is currently unused -->
+<DOMINOEXPATHS>5</DOMINOEXPATHS>
+
+<!-- type: double; default: 0.0
+CWI threshold (CWI detection and suppression) -->
+<DOMCWI>0</DOMCWI>
+
+<!-- type: bool; default: true
+8-bit extended characters -->
+<MT638BIT>1</MT638BIT>
+
+<!-- type: bool; default: false
+Long receive integration -->
+<MT63INTEGRATION>0</MT63INTEGRATION>
+
+<!-- type: bool; default: true
+Also transmit upper start tone (only if MT63USETONES is enabled) -->
+<MT63TWOTONES>1</MT63TWOTONES>
+
+<!-- type: bool; default: true
+Transmit lower start tone -->
+<MT63USETONES>1</MT63USETONES>
+
+<!-- type: int; default: 4
+Tone duration (seconds) -->
+<MT63TONEDURATION>4</MT63TONEDURATION>
+
+<!-- type: bool; default: false
+Always transmit lowest tone at 500 Hz -->
+<MT63AT500>0</MT63AT500>
+
+<!-- type: bool; default: false
+Always transmit centered at 1500 Hz (SHARES requirement) -->
+<MT63CENTERED>0</MT63CENTERED>
+
+<!-- type: int; default: 4
+size of moving average filter for bin filtering
+value 2 to 8 -->
+<FSQMOVAVG>4</FSQMOVAVG>
+
+<!-- type: double; default: 2
+0 - 300 Hz, 1 - 400 Hz, 2 - 500 Hz (default) -->
+<FSQIMGFILTER>2</FSQIMGFILTER>
+
+<!-- type: double; default: 4.5
+6, 4.5, 3 or 2 baud -->
+<FSQBAUD>4.5</FSQBAUD>
+
+<!-- type: int; default: 3
+3 / 6 -->
+<FSQHITS>3</FSQHITS>
+
+<!-- type: bool; default: false
+FSQCALL directed mode -->
+<FSQDIRECTED>0</FSQDIRECTED>
+
+<!-- type: bool; default: false
+Show fsq monitor text panel -->
+<FSQSHOWMONITOR>0</FSQSHOWMONITOR>
+
+<!-- type: bool; default: true
+Symbol averaging: true = fast, false = slow -->
+<FSQFASTAVG>1</FSQFASTAVG>
+
+<!-- type: std::string; default: &quot;cq cq cq de nocall&quot;
+QTC text string -->
+<FSQQTCTEXT>cq cq cq de nocall</FSQQTCTEXT>
+
+<!-- type: int; default: 0
+0 - NEVER (default)
+1 - 1 minute, 2 - 5 minutes, 3 - 10 minutes
+4 - 20 minutes, 5 - 30 minutes -->
+<FSQHEARDAGING>0</FSQHEARDAGING>
+
+<!-- type: int; default: 0
+0 - OFF (default)
+1 - 1 minute, 2 - 10 minutes, 3 - 30 minutes -->
+<FSQSOUNDER>0</FSQSOUNDER>
+
+<!-- type: bool; default: 0
+0 - NO, 1 - YES
+convert operator MYCALL to lower case for directed call triggers -->
+<FSQLOWERCASE>0</FSQLOWERCASE>
+
+<!-- type: int; default: 6
+Time out auto replies after XX seconds -->
+<FSQTIMEOUT>6</FSQTIMEOUT>
+
+<!-- type: int; default: 10
+FSQ notifier dialog time out XX seconds
+00 == no time out -->
+<FSQNOTIFYTIMEOUT>10</FSQNOTIFYTIMEOUT>
+
+<!-- type: bool; default: 1
+FSQ enable heard log file -->
+<FSQ_ENABLE_HEARD_LOG>1</FSQ_ENABLE_HEARD_LOG>
+
+<!-- type: std::string; default: &quot;fsq_heard_log.txt&quot;
+FSQ heard log pathname -->
+<FSQ_HEARD_LOG>fsq_heard_log.txt</FSQ_HEARD_LOG>
+
+<!-- type: bool; default: 1
+FSQ enable audit log file -->
+<FSQ_ENABLE_AUDIT_LOG>1</FSQ_ENABLE_AUDIT_LOG>
+
+<!-- type: std::string; default: &quot;fsq_audit_log.txt&quot;
+FSQ audit log pathname -->
+<FSQ_AUDIT_LOG>fsq_audit_log.txt</FSQ_AUDIT_LOG>
+
+<!-- type: bool; default: 1
+Add date-time stamp to each # type received message -->
+<ADDFSQMSGDT>1</ADDFSQMSGDT>
+
+<!-- type: bool; default: 1
+Enable to always append # directive messages to named file -->
+<ALWAYS_APPEND>1</ALWAYS_APPEND>
+
+<!-- type: int; default: 1
+1, 2, 3 -->
+<IFKPBAUD>1</IFKPBAUD>
+
+<!-- type: bool; default: 1
+IFKP enable heard log file -->
+<IFKP_ENABLE_HEARD_LOG>1</IFKP_ENABLE_HEARD_LOG>
+
+<!-- type: std::string; default: &quot;ifkp_heard_log.txt&quot;
+IFKP heard log pathname -->
+<IFKP_HEARD_LOG>ifkp_heard_log.txt</IFKP_HEARD_LOG>
+
+<!-- type: bool; default: 1
+IFKP enable audit log file -->
+<IFKP_ENABLE_AUDIT_LOG>1</IFKP_ENABLE_AUDIT_LOG>
+
+<!-- type: std::string; default: &quot;ifkp_audit_log.txt&quot;
+IFKP audit log pathname -->
+<IFKP_AUDIT_LOG>ifkp_audit_log.txt</IFKP_AUDIT_LOG>
+
+<!-- type: bool; default: 1
+0 - NO, 1 - YES
+convert operator MYCALL to lower case for all IFKP macros -->
+<IFKPLOWERCASE>1</IFKPLOWERCASE>
+
+<!-- type: bool; default: 1
+0 - NO, 1 - YES
+convert other CALLSIGN to lower case for all IFKP macros -->
+<IFKPCALLLOWERCASE>1</IFKPCALLLOWERCASE>
+
+<!-- type: bool; default: 1
+0 - NO, 1 - YES
+Always t/r at 1500 Hz -->
+<IFKPFREQLOCK>1</IFKPFREQLOCK>
+
+<!-- type: std::string; default: &quot;&quot;
+IFKP avatar image to transmit -->
+<IFKP_AVATAR_IMAGE_FILE></IFKP_AVATAR_IMAGE_FILE>
+
+<!-- type: int; default: 32
+MFSK modem afc low pass filter time constant -->
+<MFSK_avg>32</MFSK_avg>
+
+<!-- type: int; default: 1
+Waterfal FFT prefilter window function. Values are as follows:
+  0: Rectangular; 1: Blackman; 2: Hamming; 3: Hanning; 4: Triangular -->
+<WFPREFILTER>1</WFPREFILTER>
+
+<!-- type: bool; default: true
+Use FFT averaging to decrease waterfall noise -->
+<WFAVERAGING>1</WFAVERAGING>
+
+<!-- type: int; default: 8
+Waterfal latency, 1...16 -->
+<WF_LATENCY>8</WF_LATENCY>
+
+<!-- type: bool; default: true
+Draw cursor with vertical lines -->
+<USECURSORLINES>1</USECURSORLINES>
+
+<!-- type: bool; default: true
+Draw cursor center line -->
+<USECURSORCENTERLINE>1</USECURSORCENTERLINE>
+
+<!-- type: bool; default: true
+Draw bandwidth marker with vertical lines -->
+<USEBWTRACKS>1</USEBWTRACKS>
+
+<!-- type: bool; default: false
+Draw cursor with 3x vertical lines -->
+<USEWIDECURSOR>0</USEWIDECURSOR>
+
+<!-- type: bool; default: false
+Draw center line marker with 3x vertical lines -->
+<USEWIDECENTER>0</USEWIDECENTER>
+
+<!-- type: bool; default: false
+Draw bandwidth marker with 3x vertical lines -->
+<USEWIDETRACKS>0</USEWIDETRACKS>
+
+<!-- type: bool; default: false
+Draw bandwidth lines with 3x vertical lines -->
+<USEWIDEMONITOR>0</USEWIDEMONITOR>
+
+<!-- type: int; default: 4
+Index of raster font used for transmission -->
+<FELDFONTNBR>4</FELDFONTNBR>
+
+<!-- type: bool; default: true
+Show transmit signal on waterfall -->
+<VIEWXMTSIGNAL>1</VIEWXMTSIGNAL>
+
+<!-- type: bool; default: false
+Send video ID containing modem name -->
+<SENDID>0</SENDID>
+
+<!-- type: bool; default: false
+This setting is currently unused -->
+<MACROID>0</MACROID>
+
+<!-- type: bool; default: false
+Send video ID containing arbitrary text -->
+<SENDTEXTID>0</SENDTEXTID>
+
+<!-- type: std::string; default: &quot;CQ&quot;
+Video ID text for SENDTEXTID (keep short!) -->
+<STRTEXTID>CQ</STRTEXTID>
+
+<!-- type: double; default: 0.0
+Single tone at center of modem BW, carrier detect for amplifiers -->
+<PRETONE>0</PRETONE>
+
+<!-- type: bool; default: false
+Decode received DTMF tones -->
+<DTMFDECODE>0</DTMFDECODE>
+
+<!-- type: int; default: 1
+Video ID text width (characters per row) -->
+<VIDEOWIDTH>1</VIDEOWIDTH>
+
+<!-- type: bool; default: true
+Limit video width to 500 Hz -->
+<VIDLIMIT>1</VIDLIMIT>
+
+<!-- type: bool; default: true
+Limit video width to mode bandwidth -->
+<VIDMODELIMIT>1</VIDMODELIMIT>
+
+<!-- type: bool; default: true
+Use small video ID font -->
+<IDSMALL>1</IDSMALL>
+
+<!-- type: mode_set_t; default: mode_set_t()
+Mode names for which Video ID transmission is disabled -->
+<VIDEOIDMODESEXCLUDE>CW,BPSK-31,RTTY,,</VIDEOIDMODESEXCLUDE>
+
+<!-- type: bool; default: true
+Docked rig control -->
+<DOCKEDRIGCONTROL>1</DOCKEDRIGCONTROL>
+
+<!-- type: int; default: 125
+Waterfall height (pixels) -->
+<WFHEIGHT>125</WFHEIGHT>
+
+<!-- type: bool; default: true
+Show tooltips -->
+<TOOLTIPS>1</TOOLTIPS>
+
+<!-- type: bool; default: true
+Prompt to save log -->
+<NAGME>1</NAGME>
+
+<!-- type: bool; default: false
+Enable Cloudlog -->
+<ENCLOUDLOG>0</ENCLOUDLOG>
+
+<!-- type: std::string; default: &quot;&quot;
+Cloudlog API URL -->
+<CLOUDLOG_API_URL></CLOUDLOG_API_URL>
+
+<!-- type: std::string; default: &quot;&quot;
+Cloudlog API Key -->
+<CLOUDLOG_API_KEY></CLOUDLOG_API_KEY>
+
+<!-- type: int; default: 1
+Cloudlog Station ID -->
+<CLOUDLOG_STATION_ID>1</CLOUDLOG_STATION_ID>
+
+<!-- type: bool; default: false
+Clear log fields on save -->
+<CLEARONSAVE>0</CLEARONSAVE>
+
+<!-- type: bool; default: true
+Sort log by date/time off -->
+<SORTDATEOFF>1</SORTDATEOFF>
+
+<!-- type: bool; default: false
+Force date/time ON == OFF -->
+<FORCEDATETIME>0</FORCEDATETIME>
+
+<!-- type: bool; default: true
+Show menu icons -->
+<MENUICONS>1</MENUICONS>
+
+<!-- type: mode_set_t; default: mode_set_t()
+Modes that are not shown in the opmodes menu -->
+<VISIBLEMODES>,</VISIBLEMODES>
+
+<!-- type: bool; default: true
+Double-click on RX text enters QSO data -->
+<RXTEXTCLICKS>1</RXTEXTCLICKS>
+
+<!-- type: bool; default: true
+Show callsign tooltips in received text -->
+<RXTEXTTOOLTIPS>1</RXTEXTTOOLTIPS>
+
+<!-- type: bool; default: false
+Auto-fill Country and Azimuth QSO fields -->
+<AUTOFILLQSO>0</AUTOFILLQSO>
+
+<!-- type: bool; default: true
+Convert callsign field to upper case -->
+<CALLUPPERCASE>1</CALLUPPERCASE>
+
+<!-- type: bool; default: true
+Default outgoing RST to 599/59 -->
+<RSTDEFAULT>1</RSTDEFAULT>
+
+<!-- type: bool; default: true
+Default incoming RST to 599/59 -->
+<RSTINDEFAULT>1</RSTINDEFAULT>
+
+<!-- type: bool; default: true
+Enable detection and extraction of "wrapped" text -->
+<AUTOEXTRACT>1</AUTOEXTRACT>
+
+<!-- type: bool; default: true
+Open flmsg with the autoextract file -->
+<OPEN_FLMSG>1</OPEN_FLMSG>
+
+<!-- type: bool; default: true
+Transfer incoming flmsg autosend file to open flmsg application -->
+<FLMSG_TRANSFER_DIRECT>1</FLMSG_TRANSFER_DIRECT>
+
+<!-- type: bool; default: true
+Open flmsg with the autoextract file
+print to browser
+close flmsg -->
+<OPEN_FLMSG_PRINT>1</OPEN_FLMSG_PRINT>
+
+<!-- type: bool; default: false
+Open NBEMS folder upon receipt of an autoextract file -->
+<OPEN_NBEMS_FOLDER>0</OPEN_NBEMS_FOLDER>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the flmsg executable -->
+<FLMSG_PATHNAME></FLMSG_PATHNAME>
+
+<!-- type: std::string; default: &quot;dinner_bell&quot;
+audio alert audio clip name / file -->
+<BWSR_REGEX_MATCH>dinner_bell</BWSR_REGEX_MATCH>
+
+<!-- type: int; default: 8
+menu selector -->
+<REGEX_ALERT_MENU>8</REGEX_ALERT_MENU>
+
+<!-- type: bool; default: false
+enable audio alert when regex match is detected in browser -->
+<ENABLE_BWSR_REGEX_MATCH>0</ENABLE_BWSR_REGEX_MATCH>
+
+<!-- type: std::string; default: &quot;dinner_bell&quot;
+audio alert audio clip name / file -->
+<BWSR_MYCALL_MATCH>dinner_bell</BWSR_MYCALL_MATCH>
+
+<!-- type: int; default: 8
+menu selector -->
+<MYCALL_ALERT_MENU>8</MYCALL_ALERT_MENU>
+
+<!-- type: bool; default: false
+enable audio alert when MYCALL is detected in browser -->
+<ENABLE_BWSR_MYCALL_MATCH>0</ENABLE_BWSR_MYCALL_MATCH>
+
+<!-- type: double; default: 2.0
+Abort message extraction after nn.n seconds of inactivity -->
+<EXTRACT_TIMEOUT>2</EXTRACT_TIMEOUT>
+
+<!-- type: std::string; default: &quot;phone&quot;
+audio alert audio clip name / file -->
+<RX_EXTRACT_MSG_RCVD>phone</RX_EXTRACT_MSG_RCVD>
+
+<!-- type: int; default: 7
+menu selector -->
+<RX_EXTRACT_ALERT_MENU>7</RX_EXTRACT_ALERT_MENU>
+
+<!-- type: bool; default: false
+enable audio alert when flmsg received -->
+<ENABLE_RX_EXTRACT_MSG_RCVD>0</ENABLE_RX_EXTRACT_MSG_RCVD>
+
+<!-- type: std::string; default: &quot;beeboo&quot;
+audio alert audio clip name / file -->
+<RX_EXTRACT_TIMED_OUT>beeboo</RX_EXTRACT_TIMED_OUT>
+
+<!-- type: int; default: 6
+menu selector -->
+<TIMED_OUT_ALERT_MENU>6</TIMED_OUT_ALERT_MENU>
+
+<!-- type: bool; default: false
+enable audio alert when flmsg reception times out -->
+<ENABLE_RX_EXTRACT_TIMED_OUT>0</ENABLE_RX_EXTRACT_TIMED_OUT>
+
+<!-- type: std::string; default: &quot;phone&quot;
+audio alert audio clip name / file -->
+<RSID_MATCH>phone</RSID_MATCH>
+
+<!-- type: int; default: 7
+menu selector -->
+<RSID_ALERT_MENU>7</RSID_ALERT_MENU>
+
+<!-- type: bool; default: false
+enable audio alert when RsID is detected -->
+<ENABLE_RSID_MATCH>0</ENABLE_RSID_MATCH>
+
+<!-- type: std::string; default: &quot;rtty_bell&quot;
+RTTY bell ring audio clip name / file -->
+<BELL_RING>rtty_bell</BELL_RING>
+
+<!-- type: int; default: 9
+menu selector -->
+<BELL_RING_MENU>9</BELL_RING_MENU>
+
+<!-- type: int; default: 50
+Audio alert stream volume -->
+<alert_volume>50</alert_volume>
+
+<!-- type: int; default: 0
+monitor transceiver audio on alert audio device -->
+<mon_xcvr_audio>0</mon_xcvr_audio>
+
+<!-- type: int; default: 0
+monitor dsp filter output for selected modem @ waterfall frequency -->
+<mon_dsp_audio>0</mon_dsp_audio>
+
+<!-- type: bool; default: true
+Display monitor filter -->
+<MON_WF_DISPLAY>1</MON_WF_DISPLAY>
+
+<!-- type: bool; default: false
+Draw bandwidth lines with 3x vertical lines -->
+<WIDEMONITORTRACKS>0</WIDEMONITORTRACKS>
+
+<!-- type: int; default: true
+monitor transmit audio on alert audio device -->
+<mon_xmt_audio>1</mon_xmt_audio>
+
+<!-- type: double; default: 25.0
+monitor transmit monitor volume level -->
+<mon_tx_vol>25</mon_tx_vol>
+
+<!-- type: int; default: 50
+Audio stream volume -->
+<RxFilt_vol>50</RxFilt_vol>
+
+<!-- type: int; default: false
+Rx monitor audio gain boost -->
+<rxgain_x10>0</rxgain_x10>
+
+<!-- type: int; default: 500
+DSP audio stream filter bandwidth -->
+<RxFilt_bw>500</RxFilt_bw>
+
+<!-- type: int; default: 1500
+DSP audio stream filter mid frequency -->
+<RxFilt_mid>1500</RxFilt_mid>
+
+<!-- type: int; default: 1250
+DSP audio stream filter low frequency cutoff -->
+<RxFilt_low>1250</RxFilt_low>
+
+<!-- type: int; default: 1750
+DSP audio stream filter high frequency cutoff -->
+<RxFilt_high>1750</RxFilt_high>
+
+<!-- type: int; default: 0
+Rx filter tracks waterfall cursor movement -->
+<RxFilt_track_wf>0</RxFilt_track_wf>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the cty.dat data file -->
+<CTYDAT_PATHNAME>/home/gaston/.fldigi/</CTYDAT_PATHNAME>
+
+<!-- type: bool; default: false
+Capture text to file 'talk/textout.txt' -->
+<SPEAK>0</SPEAK>
+
+<!-- type: bool; default: false
+Connect to Digitalk socket server during program initialization -->
+<AUTO_TALK>0</AUTO_TALK>
+
+<!-- type: int; default: QRZXMLNONE
+Callsign xml query type.  Values are as follows:
+  0: none; 1: QRZ (paid sub.); 2: QRZ cdrom; 3: HamCall (paid sub.);
+  4: callook free US calls xml service; 5: hamQTH free xml service.
+  The default is none. -->
+<QRZXMLTYPE>0</QRZXMLTYPE>
+
+<!-- type: std::string; default: &quot;https://www.hamcall.net/&quot;
+web address of hamcall -->
+<HAMCALLURL>https://www.hamcall.net/</HAMCALLURL>
+
+<!-- type: std::string; default: &quot;https://www.hamqth.com/&quot;
+web address of hamqth -->
+<HAMQTHURL>https://www.hamqth.com/</HAMQTHURL>
+
+<!-- type: std::string; default: &quot;http://www.qrz.com/&quot;
+web address of QRZ.com -->
+<QRZURL>http://www.qrz.com/</QRZURL>
+
+<!-- type: std::string; default: &quot;https://callook.info/&quot;
+web address of callook -->
+<CALLOOKURL>https://callook.info/</CALLOOKURL>
+
+<!-- type: int; default: QRZWEBNONE
+Callsign browser query type.  Values are as follows:
+  0: none; 1: QRZ web browser; 2: HamCall web browser
+  3: hamQTH web browser.
+  The default is none. -->
+<QRZWEBTYPE>0</QRZWEBTYPE>
+
+<!-- type: std::string; default: &quot;&quot;
+QRZ cdrom path -->
+<QRZPATHNAME></QRZPATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+QRZ or HamCall subscriber username -->
+<QRZUSER></QRZUSER>
+
+<!-- type: std::string; default: &quot;&quot;
+QRZ or HamCall subscriber password -->
+<QRZPASSWORD></QRZPASSWORD>
+
+<!-- type: bool; default: false
+Populate logbook notes (comment) field with mailing address -->
+<NOTES_ADDRESS>0</NOTES_ADDRESS>
+
+<!-- type: bool; default: true
+Clear notes control when making a new QRZ query -->
+<CLEAR_NOTES>1</CLEAR_NOTES>
+
+<!-- type: std::string; default: &quot;http://www.eqsl.cc/qslcard/importADIF.cfm?ADIFdata=&quot;
+eQSL web site -->
+<EQSL_url>http://www.eqsl.cc/qslcard/importADIF.cfm?ADIFdata=</EQSL_url>
+
+<!-- type: std::string; default: &quot;&quot;
+eQSL login id -->
+<EQSL_ID></EQSL_ID>
+
+<!-- type: std::string; default: &quot;&quot;
+eQSL login password -->
+<EQSL_PASSWORD></EQSL_PASSWORD>
+
+<!-- type: std::string; default: &quot;&quot;
+eQSL nickname -->
+<EQSL_NICKNAME></EQSL_NICKNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+eQSl default message -->
+<EQSL_DEF_MSG></EQSL_DEF_MSG>
+
+<!-- type: bool; default: false
+Send eQSL when other log action invoked -->
+<EQSL_WHEN_LOGGED>0</EQSL_WHEN_LOGGED>
+
+<!-- type: bool; default: false
+Send logbook date/time off vice date on (default) -->
+<EQSL_DATETIME_OFF>0</EQSL_DATETIME_OFF>
+
+<!-- type: bool; default: true
+Show timed delivery message for successful eQSL upload -->
+<EQSL_SHOW_DELIVERY>1</EQSL_SHOW_DELIVERY>
+
+<!-- type: bool; default: false
+Send adif record to LoTW -->
+<SUBMIT_LOTW>0</SUBMIT_LOTW>
+
+<!-- type: bool; default: true
+Add -q to tqsl command line parameters -->
+<LOTW_QUIET_MODE>1</LOTW_QUIET_MODE>
+
+<!-- type: std::string; default: &quot;&quot;
+Path-name of tqsl executable -->
+<LOTW_PATHNAME></LOTW_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Password to access tqsl executable -->
+<LOTW_PASSWORD></LOTW_PASSWORD>
+
+<!-- type: bool; default: true
+Send -p <password> with each upload  -->
+<SUBMIT_LOTW_PASSWORD>1</SUBMIT_LOTW_PASSWORD>
+
+<!-- type: bool; default: true
+Show timed delivery message for successful LoTW upload -->
+<LOTW_SHOW_DELIVERY>1</LOTW_SHOW_DELIVERY>
+
+<!-- type: std::string; default: &quot;&quot;
+Tqsl station location for uploading records -->
+<LOTW_LOCATION></LOTW_LOCATION>
+
+<!-- type: int; default: 15
+Tqsl trace file timeout in seconds -->
+<tracefile_timeout>15</tracefile_timeout>
+
+<!-- type: std::string; default: &quot;127.0.0.1&quot;
+IP Address of UDP broadcast socket -->
+<UDP_LOG_ADDRESS>127.0.0.1</UDP_LOG_ADDRESS>
+
+<!-- type: std::string; default: &quot;9876&quot;
+IP port number of UDP socket -->
+<UDP_LOG_PORT>9876</UDP_LOG_PORT>
+
+<!-- type: bool; default: false
+set TRUE to enable UDP broadcast of log record -->
+<ENABLE_UDP_LOGGING>0</ENABLE_UDP_LOGGING>
+
+<!-- type: bool; default: false
+Connect to MacLogger UDP server on 255.255.255.255 / 9932 -->
+<CONNECT_TO_MACLOGGER>0</CONNECT_TO_MACLOGGER>
+
+<!-- type: bool; default: true
+Capture and use UDP Radio Report data -->
+<CAPTURE_MACLOGGER_RADIO>1</CAPTURE_MACLOGGER_RADIO>
+
+<!-- type: bool; default: false
+Capture and use UDP Spot Tune data -->
+<CAPTURE_MACLOGGER_SPOT_TUNE>0</CAPTURE_MACLOGGER_SPOT_TUNE>
+
+<!-- type: bool; default: false
+Capture and use UDP Spot Report data -->
+<CAPTURE_MACLOGGER_SPOT_REPORT>0</CAPTURE_MACLOGGER_SPOT_REPORT>
+
+<!-- type: bool; default: false
+Capture and use UDP Log Report data -->
+<CAPTURE_MACLOGGER_LOG>0</CAPTURE_MACLOGGER_LOG>
+
+<!-- type: bool; default: false
+Capture and use UDP Lookup Report data -->
+<CAPTURE_MACLOGGER_LOOKUP>0</CAPTURE_MACLOGGER_LOOKUP>
+
+<!-- type: bool; default: false
+Enable UDP string capture to file -->
+<ENABLE_MACLOGGER_LOG>0</ENABLE_MACLOGGER_LOG>
+
+<!-- type: bool; default: true
+true  - tune to spot Rx frequency
+false - tune to spot Tx frequency
+ -->
+<MACLOGGER_SPOT_RX>1</MACLOGGER_SPOT_RX>
+
+<!-- type: std::string; default: &quot;maclogger_udp_strings.txt&quot;
+Filename for maclogger UDP datastream file -->
+<MACLOGGER_LOG_FILENAME>maclogger_udp_strings.txt</MACLOGGER_LOG_FILENAME>
+
+<!-- type: std::string; default: &quot;127.0.0.1&quot;
+IP Address of N3FJP socket -->
+<N3FJP_ADDRESS>127.0.0.1</N3FJP_ADDRESS>
+
+<!-- type: std::string; default: &quot;1100&quot;
+IP port number of N3FJP socket -->
+<N3FJP_PORT>1100</N3FJP_PORT>
+
+<!-- type: bool; default: true
+Enable data stream logging. -->
+<ENABLE_N3FJP_LOG>1</ENABLE_N3FJP_LOG>
+
+<!-- type: bool; default: false
+Connect to the N3FJP log server -->
+<CONNECT_TO_N3FJP>0</CONNECT_TO_N3FJP>
+
+<!-- type: bool; default: false
+Use N3FJP spot report as signal center freq.
+Center the target at mode sweet spot -->
+<N3FJP_SWEET_SPOT>0</N3FJP_SWEET_SPOT>
+
+<!-- type: bool; default: true
+Use actual modem carrier frequency for logging -->
+<N3FJP_MODEM_CARRIER>1</N3FJP_MODEM_CARRIER>
+
+<!-- type: bool; default: false
+Use RIGTX/RX vice CWCOMPORTKEYDOWN/CWCOMPORTKEYUP -->
+<N3FJP_RIGTX>0</N3FJP_RIGTX>
+
+<!-- type: bool; default: false
+PTT change at flrig changes Rx/Tx state
+set to false if multple instance of fldigi used with single flrig -->
+<FLRIG_KEYS_MODEM>0</FLRIG_KEYS_MODEM>
+
+<!-- type: bool; default: false
+True if flrig xmlrpc server is used for xcvr control -->
+<CLIENT_TO_FLRIG>0</CLIENT_TO_FLRIG>
+
+<!-- type: bool; default: false
+True to shutdown flrig when closing fldigi -->
+<FLRIG_AUTO_SHUTDOWN>0</FLRIG_AUTO_SHUTDOWN>
+
+<!-- type: bool; default: true
+This setting is currently unused -->
+<BTNUSB>1</BTNUSB>
+
+<!-- type: bool; default: false
+RTS is PTT signal line -->
+<RTSPTT>0</RTSPTT>
+
+<!-- type: bool; default: false
+DTR is PTT signal line -->
+<DTRPTT>0</DTRPTT>
+
+<!-- type: bool; default: false
+Initial voltage on RTS is +V -->
+<RTSPLUS>0</RTSPLUS>
+
+<!-- type: bool; default: false
+Initial voltage on DTR is +V -->
+<DTRPLUS>0</DTRPLUS>
+
+<!-- type: bool; default: false
+Serial port is SCU-17 (requires 0 stop bits -->
+<SCU_17>0</SCU_17>
+
+<!-- type: bool; default: false
+Generate PTT signal on right audio channel -->
+<PTTRIGHTCHANNEL>0</PTTRIGHTCHANNEL>
+
+<!-- type: int; default: 0
+Use Hamlib rig control -->
+<CHKUSEHAMLIBIS>0</CHKUSEHAMLIBIS>
+
+<!-- type: int; default: 0
+Use RigCAT rig control -->
+<CHKUSERIGCATIS>0</CHKUSERIGCATIS>
+
+<!-- type: int; default: 0
+Use XML-RPC rig control -->
+<CHKUSEXMLRPCIS>0</CHKUSEXMLRPCIS>
+
+<!-- type: std::string; default: DEFAULT_PTTDEV
+PTT device -->
+<PTTDEV>/dev/ttyS0</PTTDEV>
+
+<!-- type: std::string; default: DEFAULT_HAMRIGDEVICE
+Hamlib rig device -->
+<HAMRIGDEVICE>/dev/ttyS0</HAMRIGDEVICE>
+
+<!-- type: std::string; default: &quot;&quot;
+Hamlib rig name -->
+<HAMRIGNAME></HAMRIGNAME>
+
+<!-- type: int; default: 0
+Hamlib rig model -->
+<HAMRIGMODEL>0</HAMRIGMODEL>
+
+<!-- type: std::string; default: &quot;&quot;
+Hamlib configuration (param=val, ...) -->
+<HAMCONFIG></HAMCONFIG>
+
+<!-- type: int; default: 1
+Hamlib rig baud rate. Values are as follows:
+  0: 300; 1: 600; 2: 1200; 3: 2400; 4: 4800; 5: 9600; 6: 19200;
+  7: 38400; 8: 57600; 9: 115200; 10: 230400; 11: 460800. -->
+<HAMRIGBAUDRATE>1</HAMRIGBAUDRATE>
+
+<!-- type: int; default: 2
+Hamlib stopbits <1/2>. -->
+<HAMRIGSTOPBITS>2</HAMRIGSTOPBITS>
+
+<!-- type: int; default: 250
+250 - 2000 in 50 msec increments -->
+<HAMRIGPOLLRATE>250</HAMRIGPOLLRATE>
+
+<!-- type: int; default: 1
+Hamlib PTT for xmt audio on data port -->
+<HAMLIBPTTONDATA>1</HAMLIBPTTONDATA>
+
+<!-- type: bool; default: false
+Hamlib xcvr uses LSB for CW -->
+<HAMLIB_CW_ISLSB>0</HAMLIB_CW_ISLSB>
+
+<!-- type: bool; default: false
+Hamlib xcvr uses USB for RTTY -->
+<HAMLIB_RTTY_ISUSB>0</HAMLIB_RTTY_ISUSB>
+
+<!-- type: int; default: 200
+wait NN msec after sending mode change
+before next transceiver CAT query
+0 - 2000 in 100 msec increments -->
+<HAMRIG_MODE_DELAY>200</HAMRIG_MODE_DELAY>
+
+<!-- type: std::string; default: &quot;&quot;
+RigCAT XML file name -->
+<XMLRIGFILENAME>/home/gaston/.fldigi/rig-not-assigned.xml</XMLRIGFILENAME>
+
+<!-- type: std::string; default: DEFAULT_HAMRIGDEVICE
+RigCAT device -->
+<XMLRIGDEVICE>/dev/ttyS0</XMLRIGDEVICE>
+
+<!-- type: int; default: 1
+RigCAT rig baud rate.  See HAMRIGBAUDRATE. -->
+<XMLRIGBAUDRATE>1</XMLRIGBAUDRATE>
+
+<!-- type: int; default: 2
+RigCAT stopbits. <1/2> -->
+<RIGCATSTOPBITS>2</RIGCATSTOPBITS>
+
+<!-- type: bool; default: false
+Use separate device for PTT -->
+<TTYPTT>0</TTYPTT>
+
+<!-- type: bool; default: false
+PTT via Hamlib command -->
+<HAMLIBCMDPTT>0</HAMLIBCMDPTT>
+
+<!-- type: bool; default: false
+PTT via RigCAT command -->
+<RIGCATCMDPTT>0</RIGCATCMDPTT>
+
+<!-- type: bool; default: false
+Use uHRouter PTT (OS X only) -->
+<USEUHROUTERPTT>0</USEUHROUTERPTT>
+
+<!-- type: bool; default: false
+Use parallel port PTT -->
+<USEPPORTPTT>0</USEPPORTPTT>
+
+<!-- type: bool; default: false
+use GPIO for ptt (pi3/4) -->
+<USE_GPIO_PTT>0</USE_GPIO_PTT>
+
+<!-- type: long; default: 0
+GPIO enable
+bits 0 - 16; bit 0 : gpio pin N -->
+<ENABLE_GPIO>0</ENABLE_GPIO>
+
+<!-- type: long; default: 0
+GPIO State
+bits 0 - 16; bit 0 : PTT ON state on pin N -->
+<GPIO_STATE>0</GPIO_STATE>
+
+<!-- type: int; default: 0
+GPIO pulse width setting for PiHpSDR PTT -->
+<GPIO_PULSE_WIDTH>0</GPIO_PULSE_WIDTH>
+
+<!-- type: bool; default: false
+CW signal on GPIO pin -->
+<USE_GPIO_CW>0</USE_GPIO_CW>
+
+<!-- type: long; default: 0
+GPIO enable cw on
+bits 0 - 16; bit 0 : gpio pin N -->
+<ENABLE_GPIO_CW>0</ENABLE_GPIO_CW>
+
+<!-- type: long; default: 0
+GPIO CW State
+bits 0 - 16; bit 0 : PTT ON state on pin N -->
+<GPIO_CW_STATE>0</GPIO_CW_STATE>
+
+<!-- type: std::string; default: &quot;NONE&quot;
+DRA-xx device name -->
+<CMEDIA_DEVICE>NONE</CMEDIA_DEVICE>
+
+<!-- type: bool; default: false
+Use cmedia PTT -->
+<CMEDIA-PTT>0</CMEDIA-PTT>
+
+<!-- type: std::string; default: &quot;GPIO-3&quot;
+cmedia GPIO pin assignment for PTT -->
+<CMEDIA_GPIO_LINE>GPIO-3</CMEDIA_GPIO_LINE>
+
+<!-- type: bool; default: false
+Initial state of RTS -->
+<RIGCATRTSPLUS>0</RIGCATRTSPLUS>
+
+<!-- type: bool; default: false
+Initial state of DTR -->
+<RIGCATDTRPLUS>0</RIGCATDTRPLUS>
+
+<!-- type: bool; default: false
+Toggle RTS for PTT -->
+<RIGCATRTSPTT>0</RIGCATRTSPTT>
+
+<!-- type: bool; default: false
+Toggle DTR for PTT -->
+<RIGCATDTRPTT>0</RIGCATDTRPTT>
+
+<!-- type: bool; default: false
+RTS/CTS flow control -->
+<RIGCATRTSCTSFLOW>0</RIGCATRTSCTSFLOW>
+
+<!-- type: int; default: 2
+Number of retries before giving up -->
+<RIGCATRETRIES>2</RIGCATRETRIES>
+
+<!-- type: int; default: 10
+Retry interval (milliseconds) -->
+<RIGCATTIMEOUT>10</RIGCATTIMEOUT>
+
+<!-- type: int; default: 50
+Write delay (milliseconds) -->
+<RIGCATWAIT>50</RIGCATWAIT>
+
+<!-- type: int; default: 200
+Wait delay (milliseconds) on first command to serial device -->
+<RIGCATINITDELAY>200</RIGCATINITDELAY>
+
+<!-- type: bool; default: false
+Commands are echoed -->
+<RIGCATECHO>0</RIGCATECHO>
+
+<!-- type: bool; default: false
+VSP support enabled -->
+<RIGCATVSP>0</RIGCATVSP>
+
+<!-- type: bool; default: false
+Restore original state of comm port when closing -->
+<RIGCATRESTORETIO>0</RIGCATRESTORETIO>
+
+<!-- type: bool; default: false
+RTS +12 -->
+<HAMLIBRTSPLUS>0</HAMLIBRTSPLUS>
+
+<!-- type: bool; default: false
+DTR +12 -->
+<HAMLIBDTRPLUS>0</HAMLIBDTRPLUS>
+
+<!-- type: bool; default: false
+RTS/CTS flow control -->
+<HAMLIBRTSCTSFLOW>0</HAMLIBRTSCTSFLOW>
+
+<!-- type: bool; default: false
+XON/XOFF flow control -->
+<HAMLIBXONXOFFFLOW>0</HAMLIBXONXOFFFLOW>
+
+<!-- type: int; default: 2
+Number of times to resend command before giving up -->
+<HAMLIBRETRIES>2</HAMLIBRETRIES>
+
+<!-- type: int; default: 200
+Retry interval (milliseconds) -->
+<HAMLIBTIMEOUT>200</HAMLIBTIMEOUT>
+
+<!-- type: int; default: 5
+Wait interval before reading response (milliseconds) -->
+<HAMLIBWAIT>5</HAMLIBWAIT>
+
+<!-- type: int; default: 0
+Write delay (milliseconds) -->
+<HAMLIBWRITEDELAY>0</HAMLIBWRITEDELAY>
+
+<!-- type: int; default: 0
+Force the rig sideband (for the purpose of calculating frequencies).
+Values are as follows: 0: as reported by rig; 1: LSB; 2: USB. -->
+<HAMLIBSIDEBAND>0</HAMLIBSIDEBAND>
+
+<!-- type: std::string; default: &quot;NONE&quot;
+nanoIO serial device -->
+<NANOSERIALPORTNAME>NONE</NANOSERIALPORTNAME>
+
+<!-- type: int; default: 0
+0 - 45.45, 1 - 50, 2 - 75, 3 - 100 baud -->
+<NANOIOBAUD>0</NANOIOBAUD>
+
+<!-- type: int; default: 1
+MARK polarity 0 - high, 1 - low -->
+<NANOIOPOLARITY>1</NANOIOPOLARITY>
+
+<!-- type: int; default: 6
+0/1200, 1/4800, 2/9600, 3/19200, 4/38400, 5/57600, 6/115200 -->
+<NANOIO_SERBAUD>6</NANOIO_SERBAUD>
+
+<!-- type: int; default: '2'
+^ ' increment/decrement value
+range '1' to '5' -->
+<NANOIOCWINCR>50</NANOIOCWINCR>
+
+<!-- type: int; default: 18
+Paddle keyer WPM (0...100) -->
+<NANOCWKEYSPEED>18</NANOCWKEYSPEED>
+
+<!-- type: int; default: 0
+0 - IambicA, 1 - IambicB, 2 - Straight -->
+<NANOIOCWKEYER>0</NANOIOCWKEYER>
+
+<!-- type: bool; default: 0
+Disable CAT PTT signal during CW ops with expernal h/w -->
+<disable_CW_PTT>0</disable_CW_PTT>
+
+<!-- type: int; default: 1
+Enable speed pot in nanoIO circuit / script -->
+<nanoIO_speed_pot>1</nanoIO_speed_pot>
+
+<!-- type: int; default: 24
+test wpm setting -->
+<nanoCW_test_wpm>24</nanoCW_test_wpm>
+
+<!-- type: int; default: 0
+Correct CW unit timing by this amount in usec -->
+<usec_corr>0</usec_corr>
+
+<!-- type: int; default: 0
+0 = LSB | 1 = USB -->
+<XCVRFSKSIDEBAND>0</XCVRFSKSIDEBAND>
+
+<!-- type: int; default: 2125
+typical values: 1275, 1615 or 2125 for 170 Hz shift, IC7200 -->
+<XCVRFSKMARK>2125</XCVRFSKMARK>
+
+<!-- type: int; default: 2
+0 to 10, number of LTRS bytes send at beginning of xmt -->
+<TTYLTRS>2</TTYLTRS>
+
+<!-- type: std::string; default: &quot;NONE&quot;
+Nav FSK serial device -->
+<NAVFSKPORT>NONE</NAVFSKPORT>
+
+<!-- type: std::string; default: &quot;NONE&quot;
+Nav config serial device -->
+<NAVCONFIGPORT>NONE</NAVCONFIGPORT>
+
+<!-- type: int; default: 0
+0 - 45.45, 1 - 75, 2 - 100 baud -->
+<NAVFSKBAUD>0</NAVFSKBAUD>
+
+<!-- type: int; default: 0
+0 = Off | 1 = On -->
+<NAVFSKSIDETONE>0</NAVFSKSIDETONE>
+
+<!-- type: int; default: 0
+0 = Off | 1 = On -->
+<NAVFSKPTT>0</NAVFSKPTT>
+
+<!-- type: int; default: 0
+0 = Normal | 1 = Reversed -->
+<NAVFSKPOLARITY>0</NAVFSKPOLARITY>
+
+<!-- type: int; default: 1
+0 = 1 | 1 = 1.5 | 2 = 2 -->
+<NAVFSKSTOPBITS>1</NAVFSKSTOPBITS>
+
+<!-- type: int; default: 1
+0 = 15 db, 1 = None -->
+<NAVCH2ATT>1</NAVCH2ATT>
+
+<!-- type: int; default: 1
+0 = 15 db, 1 = None -->
+<NAVCH1ATT>1</NAVCH1ATT>
+
+<!-- type: int; default: 1
+0 = 20 db, 1 = None -->
+<NAVRFATT>1</NAVRFATT>
+
+<!-- type: int; default: 0
+0 = Off | 1 = On -->
+<NAVLED>0</NAVLED>
+
+<!-- type: int; default: 0
+0 = Off | 1 = On -->
+<NAVCATLED>0</NAVCATLED>
+
+<!-- type: int; default: 0
+0 = Off | 1 = On -->
+<NAVWKPTT>0</NAVWKPTT>
+
+<!-- type: std::string; default: &quot;&quot;
+Station callsign -->
+<MYCALL>{{ET_CALLSIGN}}</MYCALL>
+
+<!-- type: std::string; default: &quot;&quot;
+Operator QTH -->
+<MYQTH></MYQTH>
+
+<!-- type: std::string; default: &quot;&quot;
+Operator name -->
+<MYNAME></MYNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Operator Maidenhead locator -->
+<MYLOC></MYLOC>
+
+<!-- type: std::string; default: &quot;&quot;
+Antenna description (keep short!) -->
+<MYANTENNA></MYANTENNA>
+
+<!-- type: std::string; default: &quot;&quot;
+Operator call sign, if distinct from the station call MYCALL -->
+<OPERCALL>{{ET_CALLSIGN}}</OPERCALL>
+
+<!-- type: int; default: SND_IDX_NULL
+Audio subsystem.  Values are as follows:
+  0: OSS; 1: PortAudio; 2: PulseAudio; 3: File I/O -->
+<AUDIOIO>3</AUDIOIO>
+
+<!-- type: std::string; default: &quot;&quot;
+OSS device name -->
+<OSSDEVICE></OSSDEVICE>
+
+<!-- type: std::string; default: &quot;&quot;
+For compatibility with older versions -->
+<PADEVICE></PADEVICE>
+
+<!-- type: std::string; default: &quot;&quot;
+PortAudio input device name -->
+<PORTINDEVICE>default</PORTINDEVICE>
+
+<!-- type: int; default: -1
+PortAudio input device index -->
+<PORTININDEX>19</PORTININDEX>
+
+<!-- type: std::string; default: &quot;&quot;
+PortAudio output device name -->
+<PORTOUTDEVICE>default</PORTOUTDEVICE>
+
+<!-- type: int; default: -1
+PortAudio input device index -->
+<PORTOUTINDEX>19</PORTOUTINDEX>
+
+<!-- type: std::string; default: &quot;&quot;
+PortAudio alert device name -->
+<ALERTDEVICE>default</ALERTDEVICE>
+
+<!-- type: int; default: -1
+Alert output device index -->
+<ALERTINDEX>19</ALERTINDEX>
+
+<!-- type: bool; default: false
+1 - enable audio stream, 0 - disable audio stream -->
+<ENABLE_AUDIO_ALERTS>0</ENABLE_AUDIO_ALERTS>
+
+<!-- type: std::string; default: &quot;&quot;
+PulseAudio server string -->
+<PULSESERVER></PULSESERVER>
+
+<!-- type: bool; default: true
+Audio codec supports full duplex operation -->
+<IS_FULL_DUPLEX>1</IS_FULL_DUPLEX>
+
+<!-- type: bool; default: true
+Duplicate modem signal on left & right -->
+<SIGONRIGHTCHANNEL>1</SIGONRIGHTCHANNEL>
+
+<!-- type: bool; default: false
+Reverse left-right rx audio channels -->
+<REVERSEAUDIO>0</REVERSEAUDIO>
+
+<!-- type: bool; default: false
+Reverse left-right rx audio channels -->
+<REVERSERXAUDIO>0</REVERSERXAUDIO>
+
+<!-- type: int; default: SAMPLE_RATE_UNSET
+For compatibility with older versions -->
+<SAMPLERATE>-1</SAMPLERATE>
+
+<!-- type: int; default: SAMPLE_RATE_UNSET
+Input sample rate -->
+<INSAMPLERATE>1</INSAMPLERATE>
+
+<!-- type: int; default: SAMPLE_RATE_UNSET
+Output sample rate -->
+<OUTSAMPLERATE>1</OUTSAMPLERATE>
+
+<!-- type: int; default: SRC_SINC_FASTEST
+Sample rate conversion type. Values are as follows:
+  0: Best SINC; 1: Medium SINC; 2: Fastest SINC; 3: ZOH; 4: Linear.
+The default is 2. -->
+<SAMPLECONVERTER>0</SAMPLECONVERTER>
+
+<!-- type: int; default: 0
+Input (RX) sample rate correction (PPM) -->
+<RXCORR>0</RXCORR>
+
+<!-- type: int; default: 0
+Output (TX) sample rate correction (PPM) -->
+<TXCORR>0</TXCORR>
+
+<!-- type: int; default: 0
+Difference between RX and TX freq (rig offset) -->
+<TXOFFSET>0</TXOFFSET>
+
+<!-- type: double; default: 0
+Linear frequency correction applied to frequency analysis -->
+<RIT>0</RIT>
+
+<!-- type: int; default: 0
+Wave file record sample rate
+0 - 8000, 1 - 11025, 2 - 16000, 3 - 22050
+4 - 24000, 5 - 44100, 6 - 48000 -->
+<WAV_SAMPLERATE>0</WAV_SAMPLERATE>
+
+<!-- type: bool; default: false
+Enabled - record wav file in stereo
+Disabled - record wav file in monaural (left channel only) -->
+<RECORD_BOTH_CHANNELS>0</RECORD_BOTH_CHANNELS>
+
+<!-- type: bool; default: false
+true = continuous loop of sound file playback
+false = single pass through playback file. -->
+<LOOPPLAYBACK>0</LOOPPLAYBACK>
+
+<!-- type: int; default: 0
+Start of transmit delay before sending audio -->
+<PTTONDELAY>0</PTTONDELAY>
+
+<!-- type: int; default: 0
+End of transmit delay before disabling PTT -->
+<PTTOFFDELAY>0</PTTOFFDELAY>
+
+<!-- type: double; default: 0.0
+gain factor to compensate for low level output on USB A/D in dB
+minimum -10.0, maximum + 10.0 -->
+<RX_GAIN>0</RX_GAIN>
+
+<!-- type: std::string; default: &quot;&quot;
+Logbook file name -->
+<LOGBOOKFILENAME>/home/gaston/.fldigi/logs/logbook.adif</LOGBOOKFILENAME>
+
+<!-- type: bool; default: 0
+Display read # recs and logbook name on program start -->
+<LOGBOOKREADDISPLAY>0</LOGBOOKREADDISPLAY>
+
+<!-- type: bool; default: true
+Force RST in/out to 599 -->
+<FIXED599>1</FIXED599>
+
+<!-- type: bool; default: true
+Insert leading zeros into transmitted serial number (contest) -->
+<USELEADINGZEROS>1</USELEADINGZEROS>
+
+<!-- type: bool; default: false
+Send CW cut numbers -->
+<CUTNBRS>0</CUTNBRS>
+
+<!-- type: bool; default: true
+clear logging fields upon transfer of CALL from Rx panel -->
+<CLEARFIELDS>1</CLEARFIELDS>
+
+<!-- type: int; default: FL_RED
+View Browser highlight color 1, default Dark Red -->
+<BWSRHILIGHT1>88</BWSRHILIGHT1>
+
+<!-- type: int; default: FL_GREEN
+View Browser highlight color 2, default Dark Green -->
+<BWSRHILIGHT2>63</BWSRHILIGHT2>
+
+<!-- type: int; default: 55
+View Browser background odd lines -->
+<BWSRBACKGND1>55</BWSRBACKGND1>
+
+<!-- type: int; default: 53
+View Browser background odd lines -->
+<BWSRBACKGND2>53</BWSRBACKGND2>
+
+<!-- type: int; default: FL_BLUE
+View Browser line select color -->
+<BWSRSELECT>216</BWSRSELECT>
+
+<!-- type: bool; default: true
+Check for duplicates (contest) -->
+<ENABLEDUPCHECK>1</ENABLEDUPCHECK>
+
+<!-- type: bool; default: true
+Predicate for ENABLEDUPCHECK (mode must match) -->
+<DUPMODE>1</DUPMODE>
+
+<!-- type: bool; default: true
+Predicate for ENABLEDUPCHECK (band must match) -->
+<DUPBAND>1</DUPBAND>
+
+<!-- type: bool; default: false
+Predicate for ENABLEDUPCHECK (state must match) -->
+<DUPSTATE>0</DUPSTATE>
+
+<!-- type: bool; default: false
+Predicate for ENABLEDUPCHECK (exchange must match) -->
+<DUPXCHG1>0</DUPXCHG1>
+
+<!-- type: bool; default: false
+Predicate for ENABLEDUPCHECK (QSO inside timespan) -->
+<DUPTIMESPAN>0</DUPTIMESPAN>
+
+<!-- type: int; default: 120
+Time for DUPTIMESPAN (minutes) -->
+<TIMESPAN>120</TIMESPAN>
+
+<!-- type: int; default: 1
+Contest starting number -->
+<CONTESTSTART>1</CONTESTSTART>
+
+<!-- type: int; default: 4
+Number of digits in serial number -->
+<CONTESTDIGITS>3</CONTESTDIGITS>
+
+<!-- type: std::string; default: &quot;*,-.;&quot;
+Additional characters used to delimit WORDS -->
+<NONWORDCHARS>*,-.;</NONWORDCHARS>
+
+<!-- type: std::string; default: &quot;&quot;
+Free form exchange -->
+<MYXCGH></MYXCGH>
+
+<!-- type: std::string; default: &quot;&quot;
+TX power used for logbook entries -->
+<TXPOWER></TXPOWER>
+
+<!-- type: bool; default: true
+Use power meter reading for logged TX power -->
+<LOG_POWER_METER>1</LOG_POWER_METER>
+
+<!-- type: bool; default: true
+true - report average power, false - report peak power -->
+<REPORT_AVERAGE_POWER>1</REPORT_AVERAGE_POWER>
+
+<!-- type: int; default: 20
+number of power samples over which to computer peak/average, max 50 -->
+<PWR_SET_SIZE>20</PWR_SET_SIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+Field Day call sign -->
+<FD_CALL></FD_CALL>
+
+<!-- type: std::string; default: &quot;&quot;
+Field Day (w1hkj) server position operator call -->
+<FD_OP_CALL></FD_OP_CALL>
+
+<!-- type: std::string; default: &quot;&quot;
+Field Day class -->
+<FDCLASS></FDCLASS>
+
+<!-- type: std::string; default: &quot;&quot;
+Field Day section -->
+<FDSECTION></FDSECTION>
+
+<!-- type: std::string; default: &quot;5&quot;
+Field Day multiplier -->
+<FDMULT>5</FDMULT>
+
+<!-- type: std::string; default: &quot;&quot;
+School Round Up Class -->
+<MY_SCR_CLASS></MY_SCR_CLASS>
+
+<!-- type: std::string; default: &quot;&quot;
+Jamboree On The Air Troop -->
+<MY_JOTA_TROOP></MY_JOTA_TROOP>
+
+<!-- type: std::string; default: &quot;&quot;
+JOTA scout operator -->
+<MY_JOTA_SCOUT></MY_JOTA_SCOUT>
+
+<!-- type: int; default: 0
+Logging for:
+  0 - generic QSO
+  1 - generic contest
+  2 - BART
+  3 - Field Day
+  4 - Winter Field Day
+  5 - Kids Day
+  6 - Rookie Roundup
+  7 - ARRY RTTY
+  8 - School Round UP
+  9 - Jamboree On The Air
+  10 - CQ WPX
+  11 - CQWW RTTY
+  12 - Italian ARI International DX
+  13 - North American QSO Party
+  14 - North American Sprint
+  15 - Sweepstakes
+  16 - State QSO Parties
+  17 - Ten Ten
+  18 - Africa All Mode
+  19 - VHF
+  20 - Worked All Europe -->
+<LOGGING>0</LOGGING>
+
+<!-- type: int; default: 0
+SQSO contest -->
+<SQSOcontest>0</SQSOcontest>
+
+<!-- type: std::string; default: &quot;CALL if (RSTr), if (LOCATOR), NAME, QTH&quot;
+Notes for specfied contest -->
+<CONTESTnotes>CALL if (RSTr), if (LOCATOR), NAME, QTH</CONTESTnotes>
+
+<!-- type: int; default: 0
+SQSO in-state -->
+<SQSOinstate>0</SQSOinstate>
+
+<!-- type: int; default: 0
+SQSO state -->
+<SQSOstate>0</SQSOstate>
+
+<!-- type: int; default: 0
+SQSO county -->
+<SQSOcounty>0</SQSOcounty>
+
+<!-- type: int; default: 0
+SQSO log state -->
+<SQSOlogstate>0</SQSOlogstate>
+
+<!-- type: int; default: 0
+SQSO log county -->
+<SQSOlogcounty>0</SQSOlogcounty>
+
+<!-- type: int; default: 0
+SQSO log serno -->
+<SQSOlogserno>0</SQSOlogserno>
+
+<!-- type: int; default: 0
+SQSO log exchange -->
+<SQSOlogxchg>0</SQSOlogxchg>
+
+<!-- type: int; default: 0
+SQSO log name -->
+<SQSOlogname>0</SQSOlogname>
+
+<!-- type: int; default: 0
+SQSO parse STCTY -->
+<SQSOlogstcty>0</SQSOlogstcty>
+
+<!-- type: int; default: 0
+SQSO parse CTYST -->
+<SQSOlogctyst>0</SQSOlogctyst>
+
+<!-- type: int; default: 0
+SQSO log rst -->
+<SQSOlogrst>0</SQSOlogrst>
+
+<!-- type: int; default: 0
+State of Maryland ... peculiar folks living there -->
+<SQSlogcat>0</SQSlogcat>
+
+<!-- type: bool; default: false
+Connect to field day server -->
+<CONNECT_TO_FDSERVER>0</CONNECT_TO_FDSERVER>
+
+<!-- type: std::string; default: &quot;127.0.0.1&quot;
+Field Day (w1hkj) server tcpip address -->
+<FD_TCPIP_ADDR>127.0.0.1</FD_TCPIP_ADDR>
+
+<!-- type: std::string; default: &quot;20001&quot;
+Field Day (w1hkj) server tcpip port -->
+<FD_TCPIP_PORT>20001</FD_TCPIP_PORT>
+
+<!-- type: std::string; default: &quot;&quot;
+DXCC cluster tcpip address -->
+<DXCC_HOST_URL></DXCC_HOST_URL>
+
+<!-- type: std::string; default: &quot;w3nr.ddns.net:7300::|dx.n8noe.us:7373::|w0mw.dynip.com:23::|&quot;
+Array of dxcluster host-port-user lines
+Fields separated by : character
+Lines separated by | character -->
+<DXCLUSTER_HOSTS>w3nr.ddns.net:7300::|dx.n8noe.us:7373::|w0mw.dynip.com:23::|</DXCLUSTER_HOSTS>
+
+<!-- type: std::string; default: &quot;&quot;
+DX cluster browser font name -->
+<DXC_TEXTNAME>sans</DXC_TEXTNAME>
+
+<!-- type: Fl_Font; default: FL_COURIER
+DX cluster browsers font number -->
+<DXC_TEXTFONT>0</DXC_TEXTFONT>
+
+<!-- type: int; default: 14
+DX cluster browsers font size -->
+<DXC_TEXTSIZE>14</DXC_TEXTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+DX cluster stream font name -->
+<DXFONTNAME>sans</DXFONTNAME>
+
+<!-- type: Fl_Font; default: FL_COURIER
+DX cluster stream font number -->
+<DXFONTNBR>0</DXFONTNBR>
+
+<!-- type: int; default: 14
+DX cluster stream font size -->
+<DXFONTSIZE>14</DXFONTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+DXCC cluster tcpip port number -->
+<DXCC_HOST_PORT></DXCC_HOST_PORT>
+
+<!-- type: std::string; default: &quot;&quot;
+DXCC cluster login call sign -->
+<DXCC_LOGIN></DXCC_LOGIN>
+
+<!-- type: std::string; default: &quot;&quot;
+DXCC cluster login password -->
+<DXCC_PASSWORD></DXCC_PASSWORD>
+
+<!-- type: std::string; default: &quot;Show DX&quot;
+DXC Macro Label 1 -->
+<DXC_ML1>Show DX</DXC_ML1>
+
+<!-- type: std::string; default: &quot;SH/DX&quot;
+DXC Macro 1 -->
+<DXC_MACRO1>SH/DX</DXC_MACRO1>
+
+<!-- type: std::string; default: &quot;dxcm 2&quot;
+DXC Macro Label 2 -->
+<DXC_ML2>dxcm 2</DXC_ML2>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 2 -->
+<DXC_MACRO2></DXC_MACRO2>
+
+<!-- type: std::string; default: &quot;dxcm 3&quot;
+DXC Macro Label 3 -->
+<DXC_ML3>dxcm 3</DXC_ML3>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 3 -->
+<DXC_MACRO3></DXC_MACRO3>
+
+<!-- type: std::string; default: &quot;dxcm 4&quot;
+DXC Macro Label 4 -->
+<DXC_ML4>dxcm 4</DXC_ML4>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 4 -->
+<DXC_MACRO4></DXC_MACRO4>
+
+<!-- type: std::string; default: &quot;dxcm 5&quot;
+DXC Macro Label 5 -->
+<DXC_ML5>dxcm 5</DXC_ML5>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 5 -->
+<DXC_MACRO5></DXC_MACRO5>
+
+<!-- type: std::string; default: &quot;dxcm 6&quot;
+DXC Macro Label 6 -->
+<DXC_ML6>dxcm 6</DXC_ML6>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 6 -->
+<DXC_MACRO6></DXC_MACRO6>
+
+<!-- type: std::string; default: &quot;dxcm 7&quot;
+DXC Macro Label 7 -->
+<DXC_ML7>dxcm 7</DXC_ML7>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 7 -->
+<DXC_MACRO7></DXC_MACRO7>
+
+<!-- type: std::string; default: &quot;dxcm 8&quot;
+DXC Macro Label 8 -->
+<DXC_ML8>dxcm 8</DXC_ML8>
+
+<!-- type: std::string; default: &quot;&quot;
+DXC Macro 8 -->
+<DXC_MACRO8></DXC_MACRO8>
+
+<!-- type: bool; default: true
+DXC report order; true = new record on top line -->
+<DXC_TOPLINE>1</DXC_TOPLINE>
+
+<!-- type: bool; default: false
+Create spot Cmd: string when logging contact -->
+<SPOT_WHEN_LOGGED>0</SPOT_WHEN_LOGGED>
+
+<!-- type: bool; default: false
+Connect to HOST when starting fldigi -->
+<DXC_AUTO_CONNECT>0</DXC_AUTO_CONNECT>
+
+<!-- type: bool; default: false
+Add 0..99 Hertz audio frequency factor [nn] to DX report/notes -->
+<DXC_HERTZ>0</DXC_HERTZ>
+
+<!-- type: bool; default: true
+Load last used macro file on startup -->
+<USELASTMACRO>1</USELASTMACRO>
+
+<!-- type: double; default: 0.5
+Delay between execution of RIGMODE and FILWID
+when in the same macro definition
+range 0.1 to 2.0, default = 0.5 -->
+<MBW>0.5</MBW>
+
+<!-- type: bool; default: true
+Display macro filename on startup -->
+<DISPLAYMACROFILENAME>1</DISPLAYMACROFILENAME>
+
+<!-- type: bool; default: true
+Save current macros on exit -->
+<SAVEMACROS>1</SAVEMACROS>
+
+<!-- type: bool; default: false
+Enable mouse wheel rotation to control visible macro set -->
+<MACROWHEEL>0</MACROWHEEL>
+
+<!-- type: int; default: 1
+# and position of macro bars
+0..12, 1 = default -->
+<MBARSCHEME>1</MBARSCHEME>
+
+<!-- type: bool; default: false
+Position 4 bar macro sat below Tx panel
+Default is above Rx panel -->
+<FOURBARPOSITION>0</FOURBARPOSITION>
+
+<!-- type: bool; default: false
+expand ^! macro tags in Rx panel when executed -->
+<MACROPOST>0</MACROPOST>
+
+<!-- type: double; default: -3.0
+TX attenuator (db) -30 .. 0 -->
+<TXATTEN>-3</TXATTEN>
+
+<!-- type: double; default: 0.2
+Level for monitored (on waterfall) transmit signal -->
+<TXMONITORLEVEL>0.2</TXMONITORLEVEL>
+
+<!-- type: std::string; default: &quot;default.pal&quot;
+Waterfall color palette file name -->
+<PALETTENAME>default.pal</PALETTENAME>
+
+<!-- type: bool; default: true
+Use macro group colors -->
+<USEGROUPCOLORS>1</USEGROUPCOLORS>
+
+<!-- type: std::string; default: &quot;UTF-8&quot;
+Default character set -->
+<CHARSET_NAME>UTF-8</CHARSET_NAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Menu text font index -->
+<MENUFONTNBR>0</MENUFONTNBR>
+
+<!-- type: int; default: 16
+Menu text font size -->
+<MENUFONTSIZE>16</MENUFONTSIZE>
+
+<!-- type: bool; default: true
+Enable RX font warnings -->
+<RXFONTWARN>1</RXFONTWARN>
+
+<!-- type: std::string; default: &quot;&quot;
+RX text font name -->
+<RXFONTNAME>sans</RXFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+RX text font index -->
+<RXFONTNBR>0</RXFONTNBR>
+
+<!-- type: int; default: 16
+RX text font size -->
+<RXFONTSIZE>16</RXFONTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+Macro Btn Font Name -->
+<MACROBTNFONTNAME>sans</MACROBTNFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Macro Btn font index -->
+<MACROBTNFONTNBR>0</MACROBTNFONTNBR>
+
+<!-- type: int; default: 12
+Macro btn font size -->
+<MACROBTNFONTSIZE>12</MACROBTNFONTSIZE>
+
+<!-- type: bool; default: true
+Enable TX font warnings -->
+<TXFONTWARN>1</TXFONTWARN>
+
+<!-- type: std::string; default: &quot;&quot;
+TX text font name -->
+<TXFONTNAME>sans</TXFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+TX text font index -->
+<TXFONTNBR>0</TXFONTNBR>
+
+<!-- type: int; default: 16
+TX text font size -->
+<TXFONTSIZE>16</TXFONTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+Waterfall font name -->
+<WATERFALLFONTNAME>sans</WATERFALLFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Waterfall font number -->
+<WATERFALLFONTNBR>0</WATERFALLFONTNBR>
+
+<!-- type: int; default: 12
+Waterfall font size -->
+<WATERFALLFONTSIZE>12</WATERFALLFONTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+LOGGING text font name -->
+<LOGGINGTEXTNAME>sans</LOGGINGTEXTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Logging Controls font number -->
+<LOGGINGTEXTFONT>0</LOGGINGTEXTFONT>
+
+<!-- type: int; default: 12
+Logging Controls font size -->
+<LOGGINGTEXTSIZE>12</LOGGINGTEXTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+Logbook text font name -->
+<LOGBOOKTEXTNAME>sans</LOGBOOKTEXTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Logbook dialog controls font number -->
+<LOGBOOKTEXTFONT>0</LOGBOOKTEXTFONT>
+
+<!-- type: int; default: 12
+Logbook dialog controls font size -->
+<LOGBOOKTEXTSIZE>12</LOGBOOKTEXTSIZE>
+
+<!-- type: std::string; default: &quot;&quot;
+Frequency Control font name -->
+<FREQCONTROLFONTNAME>sans</FREQCONTROLFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Frequency Control font number -->
+<FREQCONTROLFONTNBR>0</FREQCONTROLFONTNBR>
+
+<!-- type: std::string; default: &quot;gtk+&quot;
+FLTK UI scheme (none or base, gtk+, plastic) -->
+<UISCHEME>gtk+</UISCHEME>
+
+<!-- type: int; default: 0
+UI language -->
+<UILANGUAGE>0</UILANGUAGE>
+
+<!-- type: bool; default: true
+Always show audio frequencies on waterfall -->
+<WFAUDIOSCALE>1</WFAUDIOSCALE>
+
+<!-- type: int; default: 4
+Power meter type:
+ 0: 25 W, 1: 50 W, 2: 100 W, 3: 200 W, 4: AUTO -->
+<PWRSELECT>4</PWRSELECT>
+
+<!-- type: bool; default: true
+Low frequency on bottom of viewer -->
+<VIEWERASCEND>1</VIEWERASCEND>
+
+<!-- type: bool; default: true
+Signal Viewer text continuous scrolling -->
+<VIEWERMARQUEE>1</VIEWERMARQUEE>
+
+<!-- type: bool; default: false
+Signal Viewer sort after channel changes- unused -->
+<VIEWERSORT>0</VIEWERSORT>
+
+<!-- type: bool; default: false
+Signal Viewer playback history on select -->
+<VIEWERHISTORY>0</VIEWERHISTORY>
+
+<!-- type: bool; default: true
+Signal Viewer data displayed on fixed 100 Hz intervals -->
+<VIEWERfixed>1</VIEWERfixed>
+
+<!-- type: int; default: VIEWER_LABEL_RF
+Signal Viewer label type.  Values are as follows:
+  0: None; 1: Audio freq; 2: Radio freq; 2: Channel #. -->
+<VIEWERSHOWFREQ>2</VIEWERSHOWFREQ>
+
+<!-- type: int; default: 30
+Number of Signal Viewer Channels -->
+<VIEWERCHANNELS>30</VIEWERCHANNELS>
+
+<!-- type: int; default: 25
+Width of viewer (% of full panel width) -->
+<VIEWERWIDTH>25</VIEWERWIDTH>
+
+<!-- type: int; default: 15
+Signal Viewer inactivity timeout (to clear text) -->
+<VIEWERTIMEOUT>15</VIEWERTIMEOUT>
+
+<!-- type: std::string; default: &quot;&quot;
+Signal Viewer font name -->
+<VIEWERFONTNAME>sans</VIEWERFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+Signal Viewer font index -->
+<VIEWERFONTNBR>0</VIEWERFONTNBR>
+
+<!-- type: int; default: FL_NORMAL_SIZE
+Signal Viewer font size -->
+<VIEWERFONTSIZE>14</VIEWERFONTSIZE>
+
+<!-- type: bool; default: false
+Try to open remote xml logbook -->
+<XML_LOGBOOK>0</XML_LOGBOOK>
+
+<!-- type: std::string; default: &quot;127.0.0.1&quot;
+Logbook server address -->
+<XMLLOG_ADDRESS>127.0.0.1</XMLLOG_ADDRESS>
+
+<!-- type: std::string; default: &quot;8421&quot;
+Logbook server port -->
+<XMLLOG_PORT>8421</XMLLOG_PORT>
+
+<!-- type: bool; default: false
+Check for updates when starting program -->
+<CHECK_FOR_UPDATES>0</CHECK_FOR_UPDATES>
+
+<!-- type: std::string; default: DEFAULT_XMLPRC_IP_ADDRESS
+IP Address of XMLRPC Socket -->
+<XMLRPC_ADDRESS>127.0.0.1</XMLRPC_ADDRESS>
+
+<!-- type: std::string; default: DEFAULT_XMLRPC_IP_PORT
+IP port number of XMLRPC socket -->
+<XMLRPC_PORT>7362</XMLRPC_PORT>
+
+<!-- type: std::string; default: DEFAULT_ARQ_IP_ADDRESS
+IP Address of ARQ socket -->
+<ARQ_ADDRESS>127.0.0.1</ARQ_ADDRESS>
+
+<!-- type: std::string; default: DEFAULT_ARQ_IP_PORT
+IP port number of ARQ socket -->
+<ARQ_PORT>7322</ARQ_PORT>
+
+<!-- type: std::string; default: DEFAULT_KISS_IP_ADDRESS
+IP Address of KISS socket -->
+<KISS_ADDRESS>127.0.0.1</KISS_ADDRESS>
+
+<!-- type: std::string; default: DEFAULT_KISS_IP_IO_PORT
+IP port number of KISS socket -->
+<KISS_IO_PORT>7342</KISS_IO_PORT>
+
+<!-- type: std::string; default: DEFAULT_KISS_IP_OUT_PORT
+Out udp port used when ip address is the same -->
+<KISS_OUT_PORT>7343</KISS_OUT_PORT>
+
+<!-- type: int; default: 0
+Required when same IP address is used. -->
+<KISS_DUAL_PORT_ENABLED>0</KISS_DUAL_PORT_ENABLED>
+
+<!-- type: int; default: 1
+Disabled (0) ARQ socket enabled (1) KISS socket enabled (2) -->
+<DATA_IO_ENABLED>1</DATA_IO_ENABLED>
+
+<!-- type: bool; default: false
+Dissasemble AX25 packet into human readable form -->
+<AX25_DECODE_ENABLED>0</AX25_DECODE_ENABLED>
+
+<!-- type: bool; default: false
+Detect busy channel and wait for a period of time before txing -->
+<ENABLE_BUSY_CHANNEL>0</ENABLE_BUSY_CHANNEL>
+
+<!-- type: int; default: 3
+Number of seconds to wait before transmit resume -->
+<BUSY_CHANNEL_SECONDS>3</BUSY_CHANNEL_SECONDS>
+
+<!-- type: bool; default: false
+Display / Enable PSM button on main dialog -->
+<SHOW_PSM_BTN>0</SHOW_PSM_BTN>
+
+<!-- type: int; default: 2
+KPSQL Attenuation in 1/n of 1:1 Gain -->
+<KPSQL_ATTENUATION>2</KPSQL_ATTENUATION>
+
+<!-- type: bool; default: true
+Use CSMA on heavy traffic channels (AX25) -->
+<CSMA_ENABLED>1</CSMA_ENABLED>
+
+<!-- type: bool; default: false
+Connect kiss io via TCP/IP vise UDP/IP -->
+<KISS_TCP_IO>0</KISS_TCP_IO>
+
+<!-- type: bool; default: false
+Listen for TCP connection (Server mode) -->
+<KISS_TCP_LISTEN>0</KISS_TCP_LISTEN>
+
+<!-- type: bool; default: false
+Enable/Disable PSM -->
+<KPSQL_ENABLED>0</KPSQL_ENABLED>
+
+<!-- type: bool; default: false
+Make Connect Attemp on Fldigi Start -->
+<TCP_UDP_AUTO_CONNECT>0</TCP_UDP_AUTO_CONNECT>
+
+<!-- type: int; default: 63
+CSMA Persistance -->
+<CSMA_PERSISTANCE>63</CSMA_PERSISTANCE>
+
+<!-- type: int; default: 10
+CSMA Slot Time -->
+<CSMA_SLOT_TIME>10</CSMA_SLOT_TIME>
+
+<!-- type: int; default: 50
+CSMA Transit Delay -->
+<CSMA_TRANSMIT_DELAY>50</CSMA_TRANSMIT_DELAY>
+
+<!-- type: int; default: 15
+Flush buffer timout -->
+<PSM_FLUSH_BUFFER_TIMEOUT>15</PSM_FLUSH_BUFFER_TIMEOUT>
+
+<!-- type: int; default: 100
+PSM minimum measured bandwidth -->
+<PSM_MINIMUM_BANDWIDTH>100</PSM_MINIMUM_BANDWIDTH>
+
+<!-- type: int; default: 10
+PSM minimum measured bandwidth margin -->
+<PSM_MINIMUM_BANDWIDTH_MARGIN>10</PSM_MINIMUM_BANDWIDTH_MARGIN>
+
+<!-- type: bool; default: false
+Histogram threshold -->
+<PSM_USE_HISTOGRAM>0</PSM_USE_HISTOGRAM>
+
+<!-- type: int; default: 3
+Histogram theshold referece level -->
+<PSM_HISTOGRAM_OFFSET_THRESHOLD>3</PSM_HISTOGRAM_OFFSET_THRESHOLD>
+
+<!-- type: int; default: 15
+Valid signal test rate (milliseconds) -->
+<PSM_HIT_TIME_WINDOW>15</PSM_HIT_TIME_WINDOW>
+
+<!-- type: int; default: 15
+Transmit buffer timeout (minutes) -->
+<TX_BUFFER_TIMEOUT>15</TX_BUFFER_TIMEOUT>
+
+<!-- type: bool; default: false
+Enable/Disable Modem Change to a non 8 bit when KISS IO is in use -->
+<KISS_IO_MODEM_CHANGE_INHIBIT>0</KISS_IO_MODEM_CHANGE_INHIBIT>
+
+<!-- type: std::string; default: DEFAULT_FLRIG_IP_ADDRESS
+IP Address of flrig server -->
+<FLRIG_IP_ADDRESS>127.0.0.1</FLRIG_IP_ADDRESS>
+
+<!-- type: std::string; default: DEFAULT_FLRIG_IP_PORT
+IP port number of flrig server -->
+<FLRIG_IP_PORT>12345</FLRIG_IP_PORT>
+
+<!-- type: bool; default: false
+Display all rx char's using ascii3 table -->
+<SHOW_ALL_CODES>0</SHOW_ALL_CODES>
+
+<!-- type: bool; default: false
+Enable to start pskrep interface when starting fldigi -->
+<PSKREP_AUTOSTART>0</PSKREP_AUTOSTART>
+
+<!-- type: bool; default: false
+(Set by fldigi) -->
+<USEPSKREP>0</USEPSKREP>
+
+<!-- type: bool; default: false
+Report callsigns spotted in received text -->
+<PSKREPAUTO>0</PSKREPAUTO>
+
+<!-- type: bool; default: false
+Report callsigns in logged QSOs -->
+<PSKREPLOG>0</PSKREPLOG>
+
+<!-- type: bool; default: false
+Include rig frequency in reception report -->
+<PSKREPQRG>0</PSKREPQRG>
+
+<!-- type: bool; default: false
+Enable Reporter ONLY when a signal browser is visible -->
+<REPORTWHENVISIBLE>0</REPORTWHENVISIBLE>
+
+<!-- type: std::string; default: &quot;report.pskreporter.info&quot;
+Reception report server address -->
+<PSKREPHOST>report.pskreporter.info</PSKREPHOST>
+
+<!-- type: std::string; default: &quot;4739&quot;
+Reception report server port -->
+<PSKREPPORT>4739</PSKREPPORT>
+
+<!-- type: double; default: 0.0
+Slant correction for wefax Rx -->
+<WEFAXSLANT>0</WEFAXSLANT>
+
+<!-- type: std::string; default: &quot;&quot;
+Target directory for storing automatically received images storage -->
+<WEFAXSAVEDIR></WEFAXSAVEDIR>
+
+<!-- type: std::string; default: &quot;&quot;
+Source directory for sending images -->
+<WEFAXLOADDIR></WEFAXLOADDIR>
+
+<!-- type: int; default: 0
+Input filter for image reception -->
+<WEFAXFILTER>0</WEFAXFILTER>
+
+<!-- type: bool; default: true
+Enable image autocentering -->
+<WEFAX_AUTOCENTER>1</WEFAX_AUTOCENTER>
+
+<!-- type: bool; default: true
+Hide transmission window -->
+<WEFAXHIDETX>1</WEFAXHIDETX>
+
+<!-- type: int; default: 800
+Shift (Standard 800Hz) -->
+<WEFAXSHIFT>800</WEFAXSHIFT>
+
+<!-- type: int; default: 1900
+Signal centered on freq (Standard 1900Hz) -->
+<WEFAXCENTER>1900</WEFAXCENTER>
+
+<!-- type: int; default: 4000
+Received fax maximum number of rows
+1200 rows standard for IOC576 transmission. -->
+<WEFAXMAXROWS>4000</WEFAXMAXROWS>
+
+<!-- type: int; default: 1
+Pixel margin for noise removal -->
+<WEFAXNOISEMARGIN>1</WEFAXNOISEMARGIN>
+
+<!-- type: int; default: 5
+Threshold level for noise detection and removal -->
+<WEFAXNOISETHRESHOLD>5</WEFAXNOISETHRESHOLD>
+
+<!-- type: double; default: 0.05
+Threshold level for signal detection -->
+<WEFAX_CORRELATION>0.05</WEFAX_CORRELATION>
+
+<!-- type: int; default: 15
+Compute correlation on NN (2 ... 25) -->
+<WEFAX_CORR_ROWS>15</WEFAX_CORR_ROWS>
+
+<!-- type: bool; default: false
+Logs wefax file names in Adif log file -->
+<WEFAXADIFLOG>0</WEFAXADIFLOG>
+
+<!-- type: int; default: 30
+Enable autoalign after NN rows -->
+<WEFAX_auto_after>30</WEFAX_auto_after>
+
+<!-- type: int; default: 500
+Stop auto alignment after NN rows -->
+<WEFAX_align_stop>500</WEFAX_align_stop>
+
+<!-- type: int; default: 10
+Enable autoalign every NN rows -->
+<WEFAX_align_rows>10</WEFAX_align_rows>
+
+<!-- type: int; default: 3
+default lines per minute, 3 = 60, 2 = 90, 1 = 120, 0 = 240 -->
+<WEFAX_lpm_288>3</WEFAX_lpm_288>
+
+<!-- type: int; default: 1
+default lines per minute, 3 = 60, 2 = 90, 1 = 120, 0 = 240 -->
+<WEFAX_lpm_576>1</WEFAX_lpm_576>
+
+<!-- type: bool; default: false
+Logs Navtex messages in Adig log file -->
+<NAVTEXADIFLOG>0</NAVTEXADIFLOG>
+
+<!-- type: bool; default: false
+Logs Navtex messages to KML document -->
+<NAVTEXKMLLOG>0</NAVTEXKMLLOG>
+
+<!-- type: int; default: 0
+Minimum length of logged messages -->
+<NAVTEXMINSIZLOGGEDMSG>0</NAVTEXMINSIZLOGGEDMSG>
+
+<!-- type: std::string; default: &quot;http://tgftp.nws.noaa.gov/data/observations/metar/decoded/&quot;
+Internet URL used to fetch METAR data using wget symbology -->
+<WX_URL>http://tgftp.nws.noaa.gov/data/observations/metar/decoded/</WX_URL>
+
+<!-- type: std::string; default: &quot;Connection: close&quot;
+Text at end of METAR report header
+default = Connection: close -->
+<WX_EOH>Connection: close</WX_EOH>
+
+<!-- type: std::string; default: &quot;KMDQ&quot;
+4 letter specifier for wx station -->
+<WX_STA>KMDQ</WX_STA>
+
+<!-- type: bool; default: true
+Weather conditions -->
+<WX_CONDX>1</WX_CONDX>
+
+<!-- type: bool; default: true
+Report in Fahrenheit -->
+<WX_FAHRENHEIT>1</WX_FAHRENHEIT>
+
+<!-- type: bool; default: true
+Report in Celsius -->
+<WX_CELSIUS>1</WX_CELSIUS>
+
+<!-- type: bool; default: true
+Report speed in miles per hour -->
+<WX_MPH>1</WX_MPH>
+
+<!-- type: bool; default: true
+Report speed in kilometers per hour -->
+<WX_KPH>1</WX_KPH>
+
+<!-- type: bool; default: true
+Report pressure in inches of mercury -->
+<WX_INCHES>1</WX_INCHES>
+
+<!-- type: bool; default: true
+Report pressure in millibars -->
+<WX_MBARS>1</WX_MBARS>
+
+<!-- type: bool; default: true
+Use complete METAR report -->
+<WX_FULL>1</WX_FULL>
+
+<!-- type: bool; default: true
+Report station noun name -->
+<WX_STATION_NAME>1</WX_STATION_NAME>
+
+<!-- type: bool; default: true
+Unparsed METAR report -->
+<WX_RAW>1</WX_RAW>
+
+<!-- type: bool; default: false
+Purge KML data at startup -->
+<KML_PURGE_ON_STARTUP>0</KML_PURGE_ON_STARTUP>
+
+<!-- type: std::string; default: &quot;&quot;
+Destination directory for generated KML documents -->
+<KML_SAVE_DIR>/home/gaston/.fldigi/kml/</KML_SAVE_DIR>
+
+<!-- type: std::string; default: &quot;&quot;
+Command executed when creating KML files -->
+<KML_COMMAND></KML_COMMAND>
+
+<!-- type: int; default: 10000
+Minimum distance for splitting alias nodes -->
+<KML_MERGE_DISTANCE>10000</KML_MERGE_DISTANCE>
+
+<!-- type: int; default: 0
+Number of hours for keeping data in each node -->
+<KML_RETENTION_TIME>0</KML_RETENTION_TIME>
+
+<!-- type: int; default: 120
+Refresh interval written in KML files (In seconds) -->
+<KML_REFRESH_INTERVAL>120</KML_REFRESH_INTERVAL>
+
+<!-- type: int; default: 2
+KML balloons data displayed as text, HTML tables, HTML single matrix -->
+<KML_BALLOON_STYLE>2</KML_BALLOON_STYLE>
+
+<!-- type: double; default: 60.0
+Display range in dB for dft scan modem -->
+<cnt_dft_range>60</cnt_dft_range>
+
+<!-- type: int; default: 100
+Number of scans over which the average signal level is measured. -->
+<cnt_dft_scans>100</cnt_dft_scans>
+
+<!-- type: bool; default: false
+Plot vertical scale as dB relative to maximum value -->
+<dft_relative>0</dft_relative>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the flrig executable -->
+<AUTO_FLRIG_PATHNAME></AUTO_FLRIG_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the flamp executable -->
+<AUTO_FLAMP_PATHNAME></AUTO_FLAMP_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the flnet executable -->
+<AUTO_FLNET_PATHNAME></AUTO_FLNET_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the fllog executable -->
+<AUTO_FLLOG_PATHNAME></AUTO_FLLOG_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the prog1 executable -->
+<AUTO_PROG1_PATHNAME></AUTO_PROG1_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the prog2 executable -->
+<AUTO_PROG2_PATHNAME></AUTO_PROG2_PATHNAME>
+
+<!-- type: std::string; default: &quot;&quot;
+Full pathname to the prog3 executable -->
+<AUTO_PROG3_PATHNAME></AUTO_PROG3_PATHNAME>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<FLRIG_AUTO_ENABLE>0</FLRIG_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<FLNET_AUTO_ENABLE>0</FLNET_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<FLLOG_AUTO_ENABLE>0</FLLOG_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<FLAMP_AUTO_ENABLE>0</FLAMP_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<PROG1_AUTO_ENABLE>0</PROG1_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<PROG2_AUTO_ENABLE>0</PROG2_AUTO_ENABLE>
+
+<!-- type: bool; default: false
+Enable on program start -->
+<PROG3_AUTO_ENABLE>0</PROG3_AUTO_ENABLE>
+
+<!-- type: int; default: 0
+Frequency control by keyboard arrow keys
+Least significant digit are left/right keys
+0 : 1 Hz, 1 : 10 Hz, 2 : 100 Hz, 3 : 1000 Hz -->
+<SEL_LSD>0</SEL_LSD>
+
+<!-- type: int; default: 22
+Height of macro bar
+22 .. 66, default = 22, step size 2 -->
+<MACRO_HEIGHT>22</MACRO_HEIGHT>
+
+<!-- type: bool; default: false
+Enabled, Tx above Rx panel
+Disable, Rx above Tx panel (default -->
+<RXTX_SWAP>0</RXTX_SWAP>
+
+<!-- type: bool; default: false
+Enabled, View smeter & power meter
+Disable, (default) -->
+<VIEW_SMETER>0</VIEW_SMETER>
+
+<!-- type: std::string; default: &quot;&quot;
+Macro editor font name -->
+<MACROEDITORFONTNAME>sans</MACROEDITORFONTNAME>
+
+<!-- type: Fl_Font; default: FL_HELVETICA
+RX text font index -->
+<MACROEDITFONTNBR>0</MACROEDITFONTNBR>
+
+<!-- type: bool; default: false
+Use US units of distance for QRB -->
+<US_UNITS>0</US_UNITS>
+
+<!-- type: int; default: 16
+RX text font size -->
+<MACROEDITFONTSIZE>16</MACROEDITFONTSIZE>
+
+<!-- type: bool; default: false
+Flag: Change DCD pre-ample length -->
+<PSK8DCDSHORTFLAG>0</PSK8DCDSHORTFLAG>
+
+<!-- type: bool; default: false
+Allow dockable macros -->
+<DISPLAY_48MACROS>0</DISPLAY_48MACROS>
+
+<!-- type: double; default: 0.0
+Upper axis in dB for spectrum viewer -->
+<fftviewer_maxdb>0</fftviewer_maxdb>
+
+<!-- type: double; default: 60.0
+Display range in dB for spectrum viewer -->
+<fftviewer_range>60</fftviewer_range>
+
+<!-- type: int; default: 100
+Number of scans over which the average signal level is measured. -->
+<fftviewer_scans>100</fftviewer_scans>
+
+<!-- type: double; default: 2000.0
+Scan center frequency in Hertz -->
+<fftviewer_fcenter>2000</fftviewer_fcenter>
+
+<!-- type: double; default: 4000.0
+Frequency scan range in Hertz -->
+<fftviewer_frng>4000</fftviewer_frng>
+
+<!-- type: int; default: 500
+Initial spectrum range -->
+<wf_spectrum_range>500</wf_spectrum_range>
+
+<!-- type: bool; default: true
+left click on waterfall transfers to spectrum center -->
+<wf_spectrum_center>1</wf_spectrum_center>
+
+<!-- type: bool; default: true
+scale spectrum display frequency linked to modem bandwidth -->
+<wf_spectrum_modem_scale>1</wf_spectrum_modem_scale>
+
+<!-- type: int; default: 5
+scale factor for spectrum display linked to modem bandwidth -->
+<spectrum_scale_factor>5</spectrum_scale_factor>
+
+<!-- type: bool; default: true
+use waterfall db range and offset values for spectrum scope -->
+<wf_spectrum_dbvals>1</wf_spectrum_dbvals>
+
+<!-- type: int; default: 1
+FMT sample rate
+0:8000, 1:11025, 2:12000, 3:16000, 4:22050, 5:32000, 6:44100, 7:48000 -->
+<FMT_sr>1</FMT_sr>
+
+<!-- type: int; default: 3
+FMT DFT conversions per second -->
+<FMT_dft_rate>3</FMT_dft_rate>
+
+<!-- type: bool; default: false
+Reverse time axis -->
+<FMT_reverse>0</FMT_reverse>
+
+<!-- type: bool; default: false
+Plot axis/lines with 2 pixel width -->
+<FMT_thick_lines>0</FMT_thick_lines>
+
+<!-- type: bool; default: false
+Plot points lie on top of axis graticule -->
+<FMT_plot_over_axis>0</FMT_plot_over_axis>
+
+<!-- type: double; default: 0.0
+FMT freq track correction in Hertz -->
+<FMT_freq_corr>0</FMT_freq_corr>
+
+<!-- type: double; default: 4.0
+FMT FIR lpf 3db cutoff in Hertz -->
+<FMT_filter>4</FMT_filter>
+
+<!-- type: double; default: 20.0
+FMT FIR bpf 3db cutoff in Hertz -->
+<FMT_bpf_width>20</FMT_bpf_width>
+
+<!-- type: bool; default: false
+Enable unknown bandpass filter -->
+<FMT_unk_bpf_on>0</FMT_unk_bpf_on>
+
+<!-- type: bool; default: false
+Enable reference bandpass filter -->
+<FMT_ref_bpf_on>0</FMT_ref_bpf_on>
+
+<!-- type: double; default: 4.0
+FMT moving average filter length in seconds -->
+<FMT_movavg_len>4</FMT_movavg_len>
+
+<!-- type: double; default: 0.95
+Experimental first-order prefilter -->
+<FMT_prefilter>0.95</FMT_prefilter>
+
+<!-- type: bool; default: false
+Enable FMT prefilter -->
+<FMT_prefilter_on>0</FMT_prefilter_on>
+
+<!-- type: double; default: 10.0
+Experimental data culling -->
+<FMT_cull_level>10</FMT_cull_level>
+
+<!-- type: bool; default: false
+Enable data culling -->
+<FMT_cull_on>0</FMT_cull_on>
+
+<!-- type: double; default: 1.0
+Experimental DFT hardlimit level -->
+<FMT_HL_level>1</FMT_HL_level>
+
+<!-- type: bool; default: false
+Enable DFT hardlimiter -->
+<FMT_HL_on>0</FMT_HL_on>
+
+<!-- type: bool; default: false
+Enable DFT culling -->
+<FMT_dft_cull_on>0</FMT_dft_cull_on>
+
+<!-- type: bool; default: false
+Use TAB delimiters in exported csv file -->
+<fmt_use_tabs>0</fmt_use_tabs>
+
+<!-- type: bool; default: false
+Waterfall centered on unknown -->
+<fmt_center_on_unknown>0</fmt_center_on_unknown>
+
+<!-- type: bool; default: false
+Waterfall centered on reference -->
+<fmt_center_on_reference>0</fmt_center_on_reference>
+
+<!-- type: bool; default: true
+Waterfall centered on median -->
+<fmt_center_on_median>1</fmt_center_on_median>
+
+<!-- type: bool; default: false
+Sound wav file record sync'd to csv file -->
+<fmt_sync_wav_file>0</fmt_sync_wav_file>
+
+<!-- type: double; default: 2.0
+limit to frequency error before automatic reset -->
+<FMT_freq_err>2</FMT_freq_err>
+
+<!-- type: bool; default: true
+Save/restore SQUELCH on per mode basis -->
+<SQLCH_BY_MODE>1</SQLCH_BY_MODE>
+
+<!-- type: bool; default: true
+Save/restore TXLEVEL on per mode basis -->
+<TXLEVEL_BY_MODE>1</TXLEVEL_BY_MODE>
+
+<!-- type: bool; default: true
+Save/restore AFC on per mode basis -->
+<AFC_BY_MODE>1</AFC_BY_MODE>
+
+<!-- type: bool; default: true
+Save/restore REVERSE on per mode basis -->
+<REVERSE_BY_MODE>1</REVERSE_BY_MODE>
+
+</FLDIGI_DEFS>