25cd53e68a
reticulum - Removing initial attempt add managing Reticulum configuration files in EmComm Tools
2026-06-14 15:53:41 -07:00
f6b72ad8e5
lora - Fixed syntax error for et-lora case
2026-06-14 14:31:34 -07:00
43e6895116
lora - Initial support for introducing PnP for LoRa devices. The Heltec v3 collides with chip sets used by et-radio. Will address with a solution in a future commit on this branch
2026-06-14 14:26:25 -07:00
fb23857f22
misc - Added offline Heltec v3 and v4 datasheets; added a very early design for the potential Reticulum blueprint configuration subsystem
2026-06-12 14:09:43 -07:00
2235d9eefc
Reticulum - Added support for running MeshChat at 1200 baud packet from the Desktop Activities
2026-05-15 15:01:12 -07:00
1548e4101e
reticulum - Updated 300 baud configuration to match 1200 baud conifiguration
2026-05-15 13:34:44 -07:00
0a14708fae
reticulum - Added support for MeshChat to et-mode; enabled Reticulum to support multi-interface routing
2026-05-14 21:49:46 -07:00
7cfa0d58a6
reticulum - Added support for creating ~/.reticulum if does not exist
2026-05-13 07:39:59 -07:00
eaaa1e51d2
reticulum - Updated et-kill-all to stop all Reticulum systemd services
2026-05-12 08:41:09 -07:00
21c5023096
reticulum - Initial work add Reticulum to et-mode
2026-05-12 08:27:10 -07:00
9b65d80737
reticulum - Start the appropriate direwolf systemd service based on the desired packet mode
2026-05-12 07:49:56 -07:00
c14a9c155e
reticulum - Initial work on et-reticulum wrapper script
2026-05-12 07:40:35 -07:00
ee1c33632b
et-auth-table - Added a script to generate an authentication table. This was used during the T-Rex Labs collaboration video.
2026-04-16 18:39:17 -07:00
16ae97e812
et-wwv - Added et-wwv-wrapper
2026-04-16 18:36:24 -07:00
49301f311d
et-mode - Added WWV mode to et-mode
2026-04-16 16:28:54 -07:00
1315fdef7b
Early work on the et-wwv wrapper script
2026-04-16 14:51:49 -07:00
7d778f9a36
wsjtx - Initial work to add PnP support for WSJT-X 2.7.0
2026-03-22 19:34:55 -07:00
8312ea9549
ic-7300 - Added default ALSA configuration to correctly set PCM level based on et-radio settings for the IC-7300
2026-03-16 09:48:47 -07:00
9be4931118
flamp - Added flamp to fldigi autostart; configured flamp to sync with fldigi modem
2026-03-14 18:17:02 -07:00
fe50fbf7bf
amrron - Added AmRRON macros from 2022; enabled two macros in fldigi as the default
2026-03-14 08:59:29 -07:00
14d872efd5
flmsg - Added et-flmsg wrapper script
2026-03-13 16:21:16 -07:00
225f9a7fd9
ic-7300 - Added notes based on IC-7300 testing
2026-03-07 17:11:38 -07:00
beb2df9e39
xiegu-x6200 - Added supported for the Xiegu X6200. It is the same as the X6100.
2025-12-13 12:30:58 -07:00
41ce8c35e7
Merge pull request #78 from thetechprepper/misc/post-r6-build4-updates
...
Merge misc/post-r6-build4-updates to release/r6
2025-12-13 11:30:40 -07:00
530159edda
Merge pull request #77 from dstewartgo/dstewartgo-all-radios-patch-1
...
Dstewartgo all radios patch 1
2025-12-13 11:29:08 -07:00
bbcf207420
Update et-th-d74
2025-12-11 16:43:20 -08:00
a480bf3f7a
Update et-vr-n76
2025-12-11 16:43:02 -08:00
1284ff1825
Update uv-pro, vr-n76, and th-d74
...
When the jq (json query) command executes, it returns 0 if there is a .bluetooth.mac node in the json (which there is, and should be). This means we can't use $? to see if there is a value in the node or not. We need to check the value directly.
Verified that this fixes my pairing issues with the BTech UV-Pro. I'm guessing similar issues exist for the other brands of the same radio, but I don't have those to check against.
2025-12-11 16:40:54 -08:00
f9b4b339fc
VARA - Enabled Winlink listener for VARA FM and VARA HF
2025-12-11 02:35:35 -07:00
7248095635
Merge branch 'release/r6' into release/r6
2025-12-10 10:34:28 -07:00
c005aef3b8
IC-7200 - Added correct audio ALSA level for the ICom IC-7200. It is very annoying adjusting this in the field.
2025-12-08 16:19:59 -07:00
8e2d35436d
IC-7200 - Added missing filter note. Set the filter to a bandwidth of 3kH (3000 Hertz).
2025-12-08 15:55:25 -07:00
69d69847fc
Adding flmsg and flamp
2025-12-01 11:31:10 -05:00
e839b98f30
et-winlink-data Updated script to perform an automated rebuild of the Winlink index
2025-12-01 07:44:37 -07:00
f4945aafe5
et-winlink-data - Renamed et-data-winlink to et-winlink-data; fixed script to include VARA 500 Hz Winlink RMS channels
2025-12-01 07:28:37 -07:00
daf3ac362f
Renamed et-find-winlink to et-winlink-find (easier for tab completion); Updated et-voacap to support VARA HF modes: 500, 2300, 2750 hz bandwidth
2025-12-01 07:15:14 -07:00
02b5ac412a
Add support for dynamically creating the Winlink RMS channel source data set.
2025-11-30 14:39:41 -07:00
4e1a315b0d
et-find-winlink - Updated command to model et-voacap command style
2025-11-30 14:21:26 -07:00
c1a5900020
Initial prototype for finding nearby Winlink stations
2025-11-30 13:19:32 -07:00
51dca208d5
et-time - Update label used to check if time is synced via GPS. Updated need after the chrony source label was changed from GPS to NMEA
2025-11-13 11:45:29 -07:00
6566a809a9
x6100 - Removed invalid conf from radio config
2025-10-15 17:59:00 -07:00
c9f8ea6f43
formatting - Replaced tabs with spaces
2025-10-14 14:48:05 -07:00
88bd825abd
FT-857D - Replaced audio setings for the Yaesu FT-857D to use the new audio script approach.
2025-10-14 07:49:38 -07:00
f019e613f6
YAAC - Added JVM arguments to allow for large raw OSM imports to complete.
2025-10-14 07:33:37 -07:00
8191498a4f
FX-4CR - Replaced audio setings for the FX-4CR to use the new audio script approach.
2025-10-13 12:02:09 -07:00
61e28e52b5
Xiegu X6100 - Replaced audio setings for the X6100 to use the new audio script approach.
2025-10-13 11:24:23 -07:00
58c0ca36a5
TX-500MP - Added finer control for defining per radio audio levels that are user configurable. The generic approach for treating all DigiRig devices globally the same was problematic. The new audio.script configuration property is optional
2025-10-09 06:43:26 -07:00
1ebd76099d
Resolved merge conflict with et-js8call
2025-10-07 06:28:42 -07:00
b70f3c0564
xiegu-x6100 - Refactored rig control priming approach to encapsulate it behind a radio configuration property called: primeRig.
2025-10-07 06:23:12 -07:00
a233ff2e87
xiegu-x6100 Refactored rigctld priming into et-common function
2025-10-07 06:04:06 -07:00
thetechprepper