# Author   : Gaston Gonzalez
# Date     : 28 September 2024
# Updated  : 21 October 2024
# Purpose  : udev rules for the Icom IC-705
#
# Preconditions:
# 1. IC-705 connected via USB cable
#
# Postconditions:
# 1. /dev/et-cat created
# 2. /dev/et-gps created
# 3. /dev/et-audio created
# 3. rigctld is started
# 4. gpsd is started
# 
# Resources
# - https://www.florian-wolters.de/posts/ic705-serial-device-symlinks/

# Set "IC-705" as an environment variable. This workaround is needed for the IC-705. 
# Refer to the document under the Resources above for the background details.
KERNEL=="ttyACM[0-9]*", SUBSYSTEM=="tty", ATTRS{product}=="IC-705", \
    ENV{ET_DEVICE}="IC-705"

# Create consistent device name/path for the CAT serial device
ENV{ET_DEVICE}=="IC-705", SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="00", \
    ACTION=="add", \
    ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
    RUN+="/usr/bin/systemctl start rigctld"

# Create consistent device name/path for the GPS serial device
ENV{ET_DEVICE}=="IC-705", SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="02", \
    ACTION=="add", \
    ENV{ET_SUBDEVICE}="GPS", GROUP="dialout", MODE="0660", SYMLINK+="et-gps", \
    RUN+="/opt/emcomm-tools/sbin/wrapper-gpsd.sh start"

# This rule generically matches the following Icom radios: 
# 1. IC-705
# 2. IC-7200
SUBSYSTEM=="sound", ATTRS{idVendor}=="08bb", ATTRS{idProduct}=="2901", ENV{ET_DEVICE}=="", \
    ACTION=="add", \
    ATTR{id}="ET_AUDIO", \
    ENV{ET_DEVICE}="Icom generic", ENV{ET_SUBDEVICE}="AUDIO", GROUP="audio", MODE="0660", SYMLINK+="et-audio"