Gaston Gonzalez 3aeb77dad0 PnP - Updated IC-7300 notes

2024-12-14 04:11:26 -07:00

..

digirig-lite.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

digirig-mobile-no-cat.json

et-radio Updated notes for DigiRig Mobile while testing a radio transition from the FT-891 to the DigiRig Mobile.

2024-11-12 07:29:08 -07:00

icom-ic705.json

…

icom-ic7100.json

PnP - Added CAT control support for the Icom IC-7100

2024-10-12 17:23:51 -07:00

icom-ic7200.json

PnP - Added CAT control support for the Icom IC-7200

2024-10-14 08:10:54 -07:00

icom-ic7300.json

PnP - Updated IC-7300 notes

2024-12-14 04:11:26 -07:00

qrplabs-qmx.json

QRP Labs QMX - Added support for audio PnP

2024-11-10 10:44:25 -07:00

xiegu-g90.json

Xiegu G90 - Added radio settings as notes. Moved previous notes into a fieldNotes section that will be used in a future release

2024-11-10 08:53:16 -07:00

yaesu-ft818nd.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft857d.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft891.json

FT-891 - Updated notes to include setting mode to USB when operating with digital modes

2024-11-20 16:50:56 -07:00

yaesu-ft897d.json

PnP - Refactored the PnP implementation to handle the DigiRig Mobile no CAT control use case. Currently, the best workaround for the moment is to restore the JS8Call INI configuration on every startup using a template file. This will wipe out user settings on every start-up, but it is stable for now. I have a couple of long term solutions to preserve the user's settings.

2024-10-25 14:10:54 -07:00

yaesu-ft991a.json

PnP - Updated radio configuration notes for Yaesu FT-991A

2024-12-09 07:56:57 -07:00