thetechprepper 225f9a7fd9 ic-7300 - Added notes based on IC-7300 testing

2026-03-07 17:11:38 -07:00

..

audio

IC-7200 - Added correct audio ALSA level for the ICom IC-7200. It is very annoying adjusting this in the field.

2025-12-08 16:19:59 -07:00

bg2fx-fx4cr.json

FX-4CR - Replaced audio setings for the FX-4CR to use the new audio script approach.

2025-10-13 12:02:09 -07:00

btech-uvpro.bt.json

BTECH UV PRO - Added experimental support for pair and unpair.

2025-01-02 17:11:14 -07:00

digirig-lite.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

digirig-mobile-no-cat.json

et-radio Updated notes for DigiRig Mobile while testing a radio transition from the FT-891 to the DigiRig Mobile.

2024-11-12 07:29:08 -07:00

elecraft-kx2.json

Add files via upload

2025-03-30 16:54:37 -05:00

icom-ic705.json

Created et-data group for shared data access; made et-data the default group for all user accounts; removed ET_USER as a service user is no longer required; set the default umask to 002; refactored Panasonic brightness fix to remove duplicative installation tasks; added first round of radio configuration

2024-10-09 14:40:49 -07:00

icom-ic7100.json

PnP - Added CAT control support for the Icom IC-7100

2024-10-12 17:23:51 -07:00

icom-ic7200.json

IC-7200 - Added correct audio ALSA level for the ICom IC-7200. It is very annoying adjusting this in the field.

2025-12-08 16:19:59 -07:00

icom-ic7300.json

ic-7300 - Added notes based on IC-7300 testing

2026-03-07 17:11:38 -07:00

kenwood-thd74.bt.json

Kenwood TH-D74 Bluetooth TNC Support initial support

2025-01-04 14:51:00 -05:00

lab599-tx500mp.json

TX-500MP - Added finer control for defining per radio audio levels that are user configurable. The generic approach for treating all DigiRig devices globally the same was problematic. The new audio.script configuration property is optional

2025-10-09 06:43:26 -07:00

qrplabs-qmx.json

QRP Labs QMX - Added support for audio PnP

2024-11-10 10:44:25 -07:00

vgc-vrn76.bt.json

Add support for VGC VR-N76 radio

2025-02-25 21:17:24 -05:00

xiegu-g90.json

Xiegu G90 - Added radio settings as notes. Moved previous notes into a fieldNotes section that will be used in a future release

2024-11-10 08:53:16 -07:00

xiegu-x6100.json

x6100 - Removed invalid conf from radio config

2025-10-15 17:59:00 -07:00

yaesu-ft818nd.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft857d.json

FT-857D - Replaced audio setings for the Yaesu FT-857D to use the new audio script approach.

2025-10-14 07:49:38 -07:00

yaesu-ft891.json

FT-891 - Updated notes to include setting mode to USB when operating with digital modes

2024-11-20 16:50:56 -07:00

yaesu-ft897d.json

PnP - Refactored the PnP implementation to handle the DigiRig Mobile no CAT control use case. Currently, the best workaround for the moment is to restore the JS8Call INI configuration on every startup using a template file. This will wipe out user settings on every start-up, but it is stable for now. I have a couple of long term solutions to preserve the user's settings.

2024-10-25 14:10:54 -07:00

yaesu-ft991a.json

PnP - Updated radio configuration notes for Yaesu FT-991A

2024-12-09 07:56:57 -07:00

yaesu-ftx1.json

FTX-1 - Fixed typo in the notes section for the FTX-1 radio configuration

2025-06-04 06:06:15 -07:00