mirror of
https://github.com/thetechprepper/emcomm-tools-os-community.git
synced 2026-09-17 15:41:44 -04:00
thetechprepper
39 lines
1.6 KiB
Plaintext
39 lines
1.6 KiB
Plaintext
# Author : Gaston Gonzalez
|
|
# Date : 21 May 2025
|
|
# Updated : 16 May 2025
|
|
# Purpose : udev rules for the Yaesu FTX-1 via USB-C
|
|
#
|
|
# Preconditions:
|
|
# 1. Yaesu FTX-1 is selected via et-radio
|
|
# 2. Yaesu FTX-1 is connected via USB-C cable
|
|
#
|
|
# Postconditions:
|
|
# 1. /dev/et-cat created
|
|
# 2. /dev/et-audio created
|
|
# 3. rigctld is started
|
|
#
|
|
# Note: As of 05/21/25 Yaesu has not published their CAT control command specification. This is a
|
|
# temporary integration that does not include CAT control support. It will only key the PTT
|
|
# and provide audio in/out. You MUST set the frequency and mode yourself.
|
|
|
|
# Special rule to ensure that the second serial interface (/dev/ttyUSB5) is tagged as ET_DEVICE=FTX-1 so
|
|
# that it can be used in the next CAT control rule.
|
|
KERNEL=="ttyUSB[0-9]*", SUBSYSTEM=="tty", PROGRAM="/opt/emcomm-tools/sbin/udev-tester.sh yaesu-ftx1", \
|
|
ATTRS{bInterfaceNumber}=="01", \
|
|
ENV{ET_DEVICE}="FTX-1"
|
|
|
|
# CAT control device will only match if PROGRAM above matches (exit status=0)
|
|
SUBSYSTEM=="tty", ENV{ET_DEVICE}=="FTX-1", \
|
|
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea70",\
|
|
ACTION=="add", \
|
|
ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
|
|
RUN+="/usr/bin/systemctl start rigctld"
|
|
|
|
# Audio device will only match if PROGRAM above matches (exit status=0)
|
|
SUBSYSTEM=="sound", ATTRS{idVendor}=="0d8c", ATTRS{idProduct}=="0016", \
|
|
PROGRAM="/opt/emcomm-tools/sbin/udev-tester.sh yaesu-ftx1", \
|
|
ACTION=="add", \
|
|
ENV{ET_DEVICE}="FTX-1", \
|
|
ATTR{id}="ET_AUDIO", \
|
|
ENV{ET_SUBDEVICE}="AUDIO", GROUP="audio", MODE="0660", SYMLINK+="et-audio"
|