Gaston Gonzalez 7b876ad316 PnP - Added initial support for Xiegu G90 with DigiRig Mobile

2024-10-28 19:20:53 -07:00

..

digirig-lite.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

digirig-mobile-no-cat.json

PnP - Updated et-system-info to have a better human label with a non CAT device is used; added notes to the DigiRig Mobile (no CAT) radio definition and set the Hamlib ID to 6 for future purposes; updated comments in wrapper-rigctld

2024-10-25 11:19:32 -07:00

icom-ic705.json

Created et-data group for shared data access; made et-data the default group for all user accounts; removed ET_USER as a service user is no longer required; set the default umask to 002; refactored Panasonic brightness fix to remove duplicative installation tasks; added first round of radio configuration

2024-10-09 14:40:49 -07:00

icom-ic7100.json

PnP - Added CAT control support for the Icom IC-7100

2024-10-12 17:23:51 -07:00

icom-ic7200.json

PnP - Added CAT control support for the Icom IC-7200

2024-10-14 08:10:54 -07:00

qrplabs-qmx.json

PnP Added rig control support for the QRP Labs QMX

2024-10-12 08:14:57 -07:00

xiegu-g90.json

PnP - Added initial support for Xiegu G90 with DigiRig Mobile

2024-10-28 19:20:53 -07:00

yaesu-ft818nd.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft857d.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft897d.json

PnP - Refactored the PnP implementation to handle the DigiRig Mobile no CAT control use case. Currently, the best workaround for the moment is to restore the JS8Call INI configuration on every startup using a template file. This will wipe out user settings on every start-up, but it is stable for now. I have a couple of long term solutions to preserve the user's settings.

2024-10-25 14:10:54 -07:00