Gaston Gonzalez d0d4f5f199 PnP - Updated et-system-info to have a better human label with a non CAT device is used; added notes to the DigiRig Mobile (no CAT) radio definition and set the Hamlib ID to 6 for future purposes; updated comments in wrapper-rigctld

2024-10-25 11:19:32 -07:00

..

digirig-lite.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

digirig-mobile-no-cat.json

PnP - Updated et-system-info to have a better human label with a non CAT device is used; added notes to the DigiRig Mobile (no CAT) radio definition and set the Hamlib ID to 6 for future purposes; updated comments in wrapper-rigctld

2024-10-25 11:19:32 -07:00

icom-ic705.json

Created et-data group for shared data access; made et-data the default group for all user accounts; removed ET_USER as a service user is no longer required; set the default umask to 002; refactored Panasonic brightness fix to remove duplicative installation tasks; added first round of radio configuration

2024-10-09 14:40:49 -07:00

icom-ic7100.json

PnP - Added CAT control support for the Icom IC-7100

2024-10-12 17:23:51 -07:00

icom-ic7200.json

PnP - Added CAT control support for the Icom IC-7200

2024-10-14 08:10:54 -07:00

qrplabs-qmx.json

PnP Added rig control support for the QRP Labs QMX

2024-10-12 08:14:57 -07:00

yaesu-ft818nd.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft857d.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00

yaesu-ft897d.json

PnP - Initial work to get the DigiRig Mobile to work with a radio (HT or mobile) that does not support CAT. Note: This mode does not yet work as there are issues using the RTS signal to key the PTT while the Hamlib radio ID is to 1 (test mode).

2024-10-25 07:39:58 -07:00