42 lines
1.8 KiB
Plaintext
42 lines
1.8 KiB
Plaintext
|
// Status=review
|
||
|
|
|
||
|
|
image::settings-audio.png[align="center",alt="_WSJT-X_ Audio Configuration Screen"]
|
||
|
|
|
||
|
|
Select the *Audio* tab to configure your sound system.
|
||
|
|
|
||
|
|
- _Soundcard_: Select the audio devices to be used for *Input* and
|
||
|
|
*Output*. Usually the *Mono* settings will suffice, but in special
|
||
|
|
cases you can choose *Left*, *Right*, or *Both* stereo channels.
|
||
|
|
|
||
|
|
- Be sure that your audio device is configured to sample at 48000 Hz,
|
||
|
|
16 bits.
|
||
|
|
|
||
|
|
|
||
|
|
IMPORTANT: If you select the audio output device that is also your
|
||
|
|
computer's default audio device, be sure to turn off all system sounds
|
||
|
|
to prevent inadvertently transmitting them over the air.
|
||
|
|
|
||
|
|
NOTE: Windows Vista and later may configure audio devices using
|
||
|
|
the Texas Instruments PCM2900 series CODEC for microphone input rather
|
||
|
|
line input. (This chip is used in many radios with built-in USB
|
||
|
|
CODECs, as well as various other audio interfaces.) If you are using
|
||
|
|
such a device, be sure to set the mic level in the Recording Device
|
||
|
|
Properties to 0 dB.
|
||
|
|
|
||
|
|
- _Save Directory_: _WSJT-X_ can save its received audio sequences as
|
||
|
|
`.wav` files. A default directory for these files is provided; you
|
||
|
|
can select another location if desired.
|
||
|
|
|
||
|
|
- _AzEl Directory_: A file named `azel.dat` will appear in the
|
||
|
|
specified directory. The file contains information usable by another
|
||
|
|
program for automatic tracking of the Sun or Moon, as well as
|
||
|
|
calculated Doppler shift for the specified EME path. The file is
|
||
|
|
updated once per second whenever the <<ASTRODATA,Astronomical Data>>
|
||
|
|
window is displayed.
|
||
|
|
|
||
|
|
- _Remember power settings by band_: Checking either of these will
|
||
|
|
cause _WSJT-X_ to remember the *Pwr* slider setting for that operation
|
||
|
|
on a band-by-band basis. For example, when *Tune* is checked here and
|
||
|
|
you click the *Tune* button on the main window, the power slider will
|
||
|
|
change to the most recent setting used for *Tune* on the band in use.
|