SVN r8568

2018-03-17 12:56:24 -04:00
parent 587950f372
commit 45cc6416c1
633 changed files with 186 additions and 366401 deletions
@@ -1,50 +0,0 @@
-// Status=review
-.Main Window:
- Select *FT8* on the *Mode* menu.
- Set Tx and Rx frequencies to 1200 Hz.
- Double-click on *Erase* to clear both text windows.
-
-.Wide Graph Settings:
-
- *Bins/Pixel* = 4, *Start* = 200 Hz, *N Avg* = 2
- Adjust the width of the Wide Graph window so that the upper
-frequency limit is approximately 2600 Hz.
-
-.Open a Wave File:
-
- Select *File | Open* and navigate to
-+...\save\samples\FT8\170709_135615.wav+.  The waterfall and decoded
-text window should look something like the following screen shots:
-
-[[X15]]
-image::170709_135615.wav.png[align="left",alt="Wide Graph Decode 170709_135615"]
-
-image::ft8_decodes.png[align="left"]
-
- Click with the mouse anywhere on the waterfall display. The green Rx
-frequency marker will jump to your selected frequency, and the Rx
-frequency control on the main window will be updated accordingly.
-
- Do the same thing with the Shift key held down.  Now the red Tx
-frequency marker and its associated control on the main window will
-follow your frequency selections.
-
- Do the same thing with the Ctrl key held down.  Now the both colored 
-markers and both spinner controls will follow your selections.
-
- Double-clicking at any frequency on the waterfall does all the
-things just described and also invokes the decoder in a small range
-around that frequency.
-
- Now double-click on any of the the lines of decoded text in the main
-window.  Unless you have *My Call* set to K1JT or KY7M on the
-*Settings -> General* tab, all three lines will show the same
-behavior, setting both RxFreq and TxFreq to the frequency of the
-selected message.  However, if MyCall is set to K1JT then clicking on
-a message directed to K1JT will move only the Rx frequency setting.
-This behavior is desirable so that you will not inadvertently change
-your Tx frequency to that of a tail-ender who called you somewhere
-else in the FT8 subband.
-
-IMPORTANT: When finished with this Tutorial, don't forget to re-enter
-your own callsign as *My Call* on the *Settings | General* tab.
@@ -1,30 +0,0 @@
-<table cellpadding=5>
-  <tr>
-    <th align="right">Click on</th>
-    <th align="left">Action</th>
-  </tr>
-  <tr>
-    <td align="right">Waterfall:</td>
-    <td><b>Click</b> to set the Rx frequency.<br/>
-        <b>Shift-click</b> to set Tx frequency.<br/>
-        <b>Ctrl-click</b> to set Rx and Tx frequencies.<br/>
-	<b>Double-click</b> to decode at resulting Rx frequency.<br/>
-        If <b>Lock Tx=Rx</b> is checked all actions set Tx/Rx.
-    </td>
-  </tr>
-  <tr>
-    <td align="right">Decoded text:</td>
-    <td><b>Double-click</b> to copy second callsign to Dx Call,<br/>
-        locator to Dx Grid; change Rx and Tx frequencies to<br/>
-        decoded signal's frequency; generate standard messages.<br/>
-        If first callsign is your own, Tx frequency is not<br/>
-        changed unless Ctrl is held down when double-clicking.
-    </td>
-  </tr>
-  <tr>
-    <td align="right">Erase button:</td>
-    <td><b>Click</b> to erase QSO window.<br/>
-        <b>Double-click</b> to erase QSO and Band Activity windows.
-    </td>
-  </tr>
-</table>