Merged master 8748

2018-08-05 11:33:30 -04:00
parent 8f8772f1bd
commit 62899069bf
1095 changed files with 31298 additions and 367679 deletions
@@ -1,99 +0,0 @@
-program ft8sim
-
-! Generate simulated data for a 15-second HF/6m mode using 8-FSK.
-! Output is saved to a *.wav file.
-
-  use wavhdr
-  include 'ft8_params.f90'               !Set various constants
-  type(hdr) h                            !Header for .wav file
-  character arg*12,fname*17
-  character msg*22,msgsent*22
-  complex c0(0:NMAX-1)
-  complex c(0:NMAX-1)
-  integer itone(NN)
-  integer*2 iwave(NMAX)                  !Generated full-length waveform  
-
-! Get command-line argument(s)
-  nargs=iargc()
-  if(nargs.ne.6) then
-     print*,'Usage:   ft8sim "message"          DT fdop del nfiles snr'
-     print*,'Example: ft8sim "K1ABC W9XYZ EN37" 0.0 0.1 1.0   10   -18'
-     go to 999
-  endif
-  call getarg(1,msg)                     !Message to be transmitted
-  call getarg(2,arg)
-  read(arg,*) xdt                        !Time offset from nominal (s)
-  call getarg(3,arg)
-  read(arg,*) fspread                    !Watterson frequency spread (Hz)
-  call getarg(4,arg)
-  read(arg,*) delay                      !Watterson delay (ms)
-  call getarg(5,arg)
-  read(arg,*) nfiles                     !Number of files
-  call getarg(6,arg)
-  read(arg,*) snrdb                      !SNR_2500
-
-  twopi=8.0*atan(1.0)
-  fs=12000.0                             !Sample rate (Hz)
-  dt=1.0/fs                              !Sample interval (s)
-  tt=NSPS*dt                             !Duration of symbols (s)
-  baud=1.0/tt                            !Keying rate (baud)
-  bw=8*baud                              !Occupied bandwidth (Hz)
-  txt=NZ*dt                              !Transmission length (s)
-  bandwidth_ratio=2500.0/(fs/2.0)
-  sig=sqrt(2*bandwidth_ratio) * 10.0**(0.05*snrdb)
-  if(snrdb.gt.90.0) sig=1.0
-  txt=NN*NSPS/12000.0
-
-  call genft8(msg,msgsent,itone)         !Source-encode, then get itone()
-  write(*,1000) f0,xdt,txt,snrdb,bw,msgsent
-1000 format('f0:',f9.3,'   DT:',f6.2,'   TxT:',f6.1,'   SNR:',f6.1,    &
-          '  BW:',f4.1,2x,a22)
-  
-!  call sgran()
-  c=0.
-  do ifile=1,nfiles
-
-     c0=0.
-     do isig=1,25
-        f0=(isig+2)*100.0
-        phi=0.0
-        k=-1 + nint(xdt/dt)
-        do j=1,NN                             !Generate complex waveform
-           dphi=twopi*(f0+itone(j)*baud)*dt
-           if(k.eq.0) phi=-dphi
-           do i=1,NSPS
-              k=k+1
-              phi=phi+dphi
-              if(phi.gt.twopi) phi=phi-twopi
-              xphi=phi
-              if(k.ge.0 .and. k.lt.NMAX) c0(k)=cmplx(cos(xphi),sin(xphi))
-           enddo
-        enddo
-        if(fspread.ne.0.0 .or. delay.ne.0.0) call watterson(c,NMAX,fs,delay,fspread)
-        c=c+c0
-     enddo
-     c=c*sig
-     if(snrdb.lt.90) then
-        do i=0,NMAX-1                   !Add gaussian noise at specified SNR
-           xnoise=gran()
-           ynoise=gran()
-           c(i)=c(i) + cmplx(xnoise,ynoise)
-        enddo
-     endif
-
-     fac=32767.0
-     rms=100.0
-     if(snrdb.ge.90.0) iwave(1:NMAX)=nint(fac*real(c))
-     if(snrdb.lt.90.0) iwave(1:NMAX)=nint(rms*real(c))
-
-     h=default_header(12000,NMAX)
-     write(fname,1102) ifile
-1102 format('000000_',i6.6,'.wav')
-     open(10,file=fname,status='unknown',access='stream')
-     write(10) h,iwave                !Save to *.wav file
-     close(10)
-     write(*,1110) ifile,xdt,f0,snrdb,fname
-1110 format(i4,f7.2,f8.2,f7.1,2x,a17)
-  enddo
-       
-999 end program ft8sim
@@ -0,0 +1,11 @@
+This boost tree is a cut down version of the 1.63.0 source tree built
+using the boost bcp utility, invoked thus:
+
+cd <clean-boost-source-tree>
+<path-where-bcp-was-built>/bcp iterator range math numeric crc circular_buffer build bootstrap.bat bootstrap.sh boostcpp.jam boost-build.jam <this-directory>
+
+Note that bcp is built from a separate boost source tree to avoid
+polluting the clean tree used to extract components from above.
+
+Add other boost libraries as necessary. See the Subversion book for
+details on how to maintain 3rd-party vendor content used in a project.