chris/js8call
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merged master 8748

Browse Source
This commit is contained in:
Jordan Sherer
2018-08-05 11:33:30 -04:00
parent 8f8772f1bd
commit 62899069bf
1095 changed files with 31298 additions and 367679 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/user_guide/en/tutorial-example3.adoc
+10 -6
View File
@@ -56,17 +56,21 @@ NOTE: Further helpful tips on FT8 operating procedures are available
.FT8 DXpedition Mode:
- This special operating mode enables DXpeditions to make FT8 QSOs at
This special operating mode enables DXpeditions to make FT8 QSOs at
very high rates. Both stations must use _WSJT-X_ Version 1.9 or
later. Detailed operating instructions for {ft8_DXped} are available
online. Do not try to use DXpedition mode without reading these
instructions carefully!
IMPORTANT: FT8 DXpedition mode is suitable for use only by legitimate
DXpeditions and those attempting to work them. Do not try to use
DXpedition mode for normal FT8 operation. Do not use it in the
conventional FT8 subbands. And especially, do not use the
multi-signal capability unless you are a DXpedition.
IMPORTANT: FT8 DXpedition mode is intended for use by rare-entity
DXpeditions and other unusual circumstances in which sustained QSO
rates well above 100/hour are expected. Do not use the multi-signal
capability unless you satisfy this requirement, and do not use
DXpedition Mode in the conventional FT8 sub-bands. If you are
contemplating operation as Fox using DXpedition Mode, find a suitable
dial frequency consistent with regional band plans and publicize it
for the operators you hope to work. Remember that on-the-air signal
frequencies will be higher than the dial frequency by up to 4 kHz.
IMPORTANT: When finished with this Tutorial, don't forget to re-enter
your own callsign as *My Call* on the *Settings | General* tab.