configuration_dialog 0 0 800 600 Settings true Select tab to change configuration parameters. 0 Genera&l General station details and settings. 0 Station QFrame::NoFrame QFrame::Plain 0 true 0 0 738 453 6 0 0 0 0 Station Details My Maidenhead Grid Locator: grid_line_edit <html><head/><body>4 to 12-digit Maidenhead Locator</body></html> 12 <html><head/><body>Enter a comma separated list of callsign groups (e.g., @GROUP/1, @ARES, @RACES, etc). Each group behaves similarly to @ALLCALL. Messages that are directed to the group are printed at all participating stations.</body></html> @GROUP1, ... My Callsign: callsign_line_edit Callsign Groups (comma separated): Station callsign. Do not participate in the @ALLCALL group false false IARU Region false IARU Region: region_combo_box Station Messages <html><head/><body>Station Description Message</body></html> Station Detail (QTC) Message: CQCQCQ <MYGRID4> HW CPY? <html><head/><body>Station location message that is transmitted in response to "@" directed queries.</body></html> Reply Message: <html><head/><body>Station location message</body></html> Station Location (QTH) Message: <html><head/><body>Station message that is transmitted in response to "&" directed queries.</body></html> CQ Message: Qt::Vertical 20 40 Behavior QFrame::NoFrame QFrame::Plain 0 true 0 0 654 482 0 0 0 0 Behavior true Show distance to DX station in miles rather than kilometers. Display dista&nce in miles Don't start decoding until the monitor button is clicked. Mon&itor (RX) off at startup false Autoreply (AUTO) off at startup Disable message relay (>) when AUTO is enabled false <html><head/><body>Check this if you wish to automatically return to the last monitored frequency when monitor is enabled, leave it unchecked if you wish to have the current rig frequency maintained.</body></html> Monitor returns to last used frequency true <html><head/><body>Some rigs are not able to process CAT commands while transmitting. This means that if you are operating in split mode you may have to uncheck this option.</body></html> Allow Tx frequency changes while transmitting false false Single decode Immediately transmit CQ, Reply, QTC, QTH, Saved, and Directed messages from the menu Allow heartbeat transmissions outside of heartbeat sub-channel (500Hz - 1000Hz) false false Send a CW ID after every 73 or free text message. CW ID a&fter 73 true 0 0 false Periodic CW ID Inter&val: CW_id_interval_spin_box true 0 0 false Send a CW ID periodically every few minutes. This might be required under your countries licence regulations. It will not interfere with other users as it is always sent in the quiet period when decoding is done. false 0 0 100 30 false Enable VHF/UHF/Microwave features false 0 0 100 30 false Decode after EME delay false 0 0 100 30 false Automatic transmission mode. Doubl&e-click on call sets Tx enable false 0 0 100 30 false Turns off automatic transmissions after sending a 73 or any other free text message. Di&sable Tx after sending 73 Aging Remove callsigns from call activity after: callsign_aging_spin_box <html><head/><body>Number of minutes between unattended pings</body></html> Disabled minutes 0 1440 1 0 Remove messages from band activity after: callsign_aging_spin_box <html><head/><body>Number of minutes between unattended pings</body></html> Disabled minutes 0 1440 1 2 Idle Watchdog Disable automatic transmissions after: tx_watchdog_spin_box <html><head/><body>Number of minutes before unattended heartbeat transmissions are aborted.</body></html> Disabled minutes of inactivity 0 1440 1 60 false Heartbeat (HB) Qt::Vertical 20 40 false Heartbeat (HB) false Heartbeat interval: false <html><head/><body>Number of minutes between unattended heartbeat transmissions.</body></html> Disabled minutes every 0 1440 5 30 Qt::Vertical 20 20 &Radio Radio interface configuration settings. Rig: rig_combo_box 1 0 Poll Interval: CAT_poll_interval_spin_box <html><head/><body>Interval to poll rig for status. Longer intervals will mean that changes to the rig will take longer to be detected.</body></html> s 1 0 CAT Control QFrame::NoFrame QFrame::Plain 0 true 0 0 264 435 0 0 0 0 Port: CAT_port_combo_box 1 0 Serial port used for CAT control. true QComboBox::NoInsert Parameters Baud Rate: CAT_serial_baud_combo_box 0 0 Serial port data rate which must match the setting of your radio. 0 1200 2400 4800 9600 19200 38400 57600 115200 <html><head/><body>Number of data bits used to communicate with your radio's CAT interface (usually eight).</body></html> Data Bits D&efault true CAT_data_bits_button_group Se&ven true CAT_data_bits_button_group E&ight false CAT_data_bits_button_group <html><head/><body>Number of stop bits used when communicating with your radio's CAT interface(consult you radio's manual for details).</body></html> Stop Bits Default true CAT_stop_bits_button_group On&e CAT_stop_bits_button_group T&wo false CAT_stop_bits_button_group <html><head/><body>Flow control protocol used between this computer and your radio's CAT interface (usually "None" but some require "Hardware").</body></html> Handshake Default true CAT_handshake_button_group &None false CAT_handshake_button_group Software flow control (very rare on CAT interfaces). XON/XOFF CAT_handshake_button_group Flow control using the RTS and CTS RS-232 control lines not often used but some radios have it as an option and a few, particularly some Kenwood rigs, require it). &Hardware CAT_handshake_button_group Special control of CAT port control lines. Force Control Lines false High Low DTR: force_DTR_combo_box RTS: force_RTS_combo_box High Low Qt::Vertical 20 40 Rig Options QFrame::NoFrame QFrame::Plain 0 true 0 0 237 436 0 0 0 0 0 0 How this program activates the PTT on your radio PTT Method <html><head/><body>No PTT activation, instead the radio's automatic VOX is used to key the transmitter.Use this if you have no radio interface hardware.</body></html> VO&X PTT_method_button_group <html><head/><body>Use the RS-232 DTR control line to toggle your radio's PTT, requires hardware to inteface the line.Some commercial interface units also use this method.The DTR control line of the CAT serial port may be used for this or a DTR control line on a different serial port may be used.</body></html> &DTR true PTT_method_button_group Some radios support PTT via CAT commands, use this option if your radio supports it and you have no other hardware interface for PTT. C&AT PTT_method_button_group <html><head/><body>Use the RS-232 RTS control line to toggle your radio's PTT, requires hardware to inteface the line.Some commercial interface units also use this method.The RTS control line of the CAT serial port may be used for this or a RTS control line on a different serial port may be used. Note that this option is not available on the CAT serial port when hardware flow control is used.</body></html> R&TS PTT_method_button_group QFormLayout::ExpandingFieldsGrow Port: PTT_port_combo_box 1 0 <html><head/><body>Select the RS-232 serial port utilised for PTT control, this option is available when DTR or RTS is selected above as a transmit method.This port can be the same one as the one used for CAT control.For some interface types the special value CAT may be chosen, this is used for non-serial CAT interfaces that can control serial port control lines remotely (OmniRig for example).</body></html> true -1 QComboBox::NoInsert Modulation mode selected on radio. Mode <html><head/><body>USB is usually the correct modulation mode,unless the radio has a special data or packet mode settingfor AFSK operation.</body></html> US&B true TX_mode_button_group Don't allow the program to set the radio mode (not recommended but use if the wrong mode or bandwidth is selected). None TX_mode_button_group If this is availabe then it is usually the correct mode for this program. Data/P&kt TX_mode_button_group Some radios can select the audio input using a CAT command, this setting allows you to select which audio input will be used (if it is available then generally the Rear/Data option is best). Transmit Audio Source Rear&/Data TX_audio_source_button_group &Front/Mic true TX_audio_source_button_group Split Operation Fake It split_mode_button_group Rig split_mode_button_group None true split_mode_button_group Advanced Tx delay: sbTxDelay Minimum delay between assertion of PTT and start of Tx audio. s 1 0.000000000000000 0.500000000000000 0.100000000000000 Qt::Vertical 20 40 <html><head/><body>Attempt to connect to the radio with these settings.The button will turn green if the connection is successful or red if there is a problem.</body></html> Test CAT Qt::Horizontal QSizePolicy::Preferred 40 20 Attempt to activate the transmitter. Click again to deactivate. Normally no power should be output since there is no audio being generated at this time. Check that any Tx indication on your radio and/or your radio interface behave as expected. QPushButton:checked { background-color: red; border-style : outset; border-width: 1px; border-radius: 5px; border-color: black; min-width: 5em; padding: 3px; } Test PTT true &Audio Audio interface settings QFrame::NoFrame QFrame::Plain 0 true 0 0 266 329 0 0 0 0 Souncard Soundcard 1 0 Select the audio CODEC to use for transmitting. If this is your default device for system sounds then ensure that all system sounds are disabled otherwise you will broadcast any systems sounds generated during transmitting periods. 1 0 Select the audio CODEC to use for receiving. &Input: sound_input_combo_box Select the channel to use for receiving. Mono Left Right Both Select the audio channel used for transmission. Unless you have multiple radios connected on different channels; then you will usually want to select mono or both here. Mono Left Right Both Ou&tput: sound_output_combo_box Save Directory Save Directory Loc&ation: save_path_select_push_button 1 0 Path to which .WAV files are saved. false background-color: rgb(255, 255, 255); TextLabel Click to select a different save directory for .WAV files. S&elect AzEl Directory AzEl Directory Location: azel_path_select_push_button 1 0 background-color: rgb(255, 255, 255); TextLabel Select Power Memory By Band Remember power settings by band Enable power memory during transmit Transmit Enable power memory during tuning Tune Qt::Vertical 0 0 Reportin&g Reporting and logging settings QFrame::NoFrame QFrame::Plain 0 true 0 0 508 525 0 0 0 0 Logging Op Call: false false The program will pop up a partially completed Log QSO dialog when you send a 73 or free text message. Promp&t me to log QSO true true Check this option to force deselect callsign after logging. Deselect callsign after logging <html><head/><body>The callsign of the operator, if different from the station callsign.</body></html> Some logging programs will not accept JT-65 or JT9 as a recognized mode. Con&vert mode to DATA false false Some logging programs will not accept the type of reports saved by this program. Check this option to save the sent and received reports in the comments field. d&B reports to comments Qt::Horizontal 40 20 UDP API QFormLayout::AllNonFixedFieldsGrow UDP Server: udp_server_line_edit 0 0 <html><head/><body>Optional hostname of network service to receive decodes.Formats:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hostname</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 multicast group address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 multicast group address</li></ul>Clearing this field will disable the broadcasting of UDP status updates.</body></html> Qt::ImhDigitsOnly UDP Server Port: udp_server_port_spin_box <html><head/><body>Enter the service port number of the UDP server that should receive updates. If this is zero no updates will be broadcast.</body></html> 0 65534 Enable UDP Server API <html><head/><body>With this enabled the app will accept certain requests back from a UDP server that receives decode messages.</body></html> Accept UDP requests <html><head/><body>Check to allow changes to grid, qtc, etc from external programs</body></html> Accept Dynamic Station Information false <html><head/><body>Indicate acceptance of an incoming UDP request. The effect of this option varies depending on the operating system and window manager, its intent is to notify the acceptance of an incoming UDP request even if this application is minimized or hidden.</body></html> Notify on accepted UDP request false <html><head/><body>Restore the window from minimized if an UDP request is accepted.</body></html> Accepted UDP request restores window Network Services The program can send your station details and all decoded signals as spots to the http://pskreporter.info web site. This is used for reverse ping analysis which is very useful for assessing propagation and system performance. Enable spotting to reporting networks (PSKReporter && APRS-IS) true QFormLayout::AllNonFixedFieldsGrow APRS Server: udp_server_line_edit 0 0 <html><head/><body>Optional hostname of APRS server to send spots to.Formats:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hostname</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 multicast group address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 multicast group address</li></ul>Clearing this field will disable the spotting to APRS.</body></html> Qt::ImhDigitsOnly rotate.aprs2.net APRS Server Port: udp_server_port_spin_box <html><head/><body>Enter the service port number of the APRS server that should receive updates. If this is zero no updates will be broadcast.</body></html> 0 65534 14580 <html><head/><body>APRS Server Passcode for Sending APRS Packets</body></html> APRS Passcode: N1MM Logger+ Broadcasts QFormLayout::AllNonFixedFieldsGrow <html><head/><body>When checked, the app will broadcast a logged contact in ADIF format to the configured hostname and port. </body></html> Enable logged contact ADIF broadcast <html><head/><body>N1MM Server:</body></html> <html><head/><body>Optional host name of N1MM Logger+ program to receive ADIF UDP broadcasts. This is usually 'localhost' or ip address 127.0.0.1Formats:<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">hostname</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv4 multicast group address</li><li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">IPv6 multicast group address</li></ul>Clearing this field will disable broadcasting of ADIF information via UDP.</body></html> <html><head/><body>N1MM Server Port:</body></html> <html><head/><body>Enter the port number that should be used for UDP broadcasts of ADIF log information. For N1MM Logger+, this value should be 2333. If this is zero, no updates will be broadcast.</body></html> Qt::Vertical 20 40 Qt::Vertical 0 0 &Frequencies Default frequencies and band specific station details setup QFrame::NoFrame QFrame::Plain 0 true 0 0 487 341 0 0 0 0 <html><head/><body>See "Frequency Calibration" in the User Guide for details of how to determine these parameters for your radio.</body></html> Frequency Calibration Slope: calibration_slope_ppm_spin_box Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter ppm 4 -999.999900000000025 999.999900000000025 0.100000000000000 0.000000000000000 Intercept: calibration_intercept_spin_box Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter Hz 2 -99999.990000000005239 99999.990000000005239 0.100000000000000 Frequencies 1 0 Qt::ActionsContextMenu <html><head/><body>Right click to maintain the working frequencies list.</body></html> QAbstractItemView::DragOnly true QAbstractItemView::SelectRows true true false Frequency Schedule Automatically switch bands / frequencies at specific times of day false Qt::ActionsContextMenu true Items may be edited. Right click for insert and delete options. true true QAbstractItemView::DragDrop Qt::MoveAction true QAbstractItemView::ExtendedSelection QAbstractItemView::SelectRows true true true 120 100 true false 30 24 Saved &Messages Canned free text messages setup &Add &Delete Qt::ActionsContextMenu Drag and drop items to rearrange order Right click for item specific actions Click, SHIFT+Click and, CRTL+Click to select items QListView { show-decoration-selected: 1; /* make the selection span the entire width of the view */ } QListView::item:alternate { background: #EEEEEE; } QListView::item:selected { border: 1px solid #6a6ea9; } QListView::item:selected:!active { background: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #ABAFE5, stop: 1 #8588B2); } QListView::item:selected:active { background: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #6a6ea9, stop: 1 #888dd9); } QListView::item:hover { background: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1, stop: 0 #FAFBFE, stop: 1 #DCDEF1); } QAbstractItemView::InternalMove Qt::MoveAction true QAbstractItemView::ExtendedSelection true &Notifications Notification Sounds 0 0 Test Clear Clear CQ Message Received: azel_path_select_push_button 1 0 background-color: rgb(255, 255, 255); TextLabel Relay/Alert Message Received: azel_path_select_push_button Select 1 0 background-color: rgb(255, 255, 255); TextLabel Select Directed Message Received: azel_path_select_push_button Test 1 0 background-color: rgb(255, 255, 255); TextLabel Select Test Clear true Notification sounds are played over the default system soundcard. Special care must be taken while using VOX to ensure notification sounds are not transmitted. true Qt::Vertical 20 40 &UI Global true Set the font characteristics for the application. Application Font 0 false Band && Call Activity 9 9 QFrame::NoFrame QFrame::Plain 0 true 0 0 271 195 0 0 0 Foreground Color 80 20 QLabel{background-color: #66ff66} K1ABC Qt::AlignCenter 140 0 CQ Background Font 80 20 QLabel{background-color: #3498db}<?xml version="1.0" encoding="UTF-8"?> <ui version="4.0"> <widget name="__qt_fake_top_level"> <widget class="QLabel" name="labCQ"> <property name="geometry"> <rect> <x>12</x> <y>32</y> <width>302</width> <height>25</height> </rect> </property> <property name="minimumSize"> <size> <width>80</width> <height>20</height> </size> </property> <property name="styleSheet"> <string notr="true">QLabel{background-color: #66ff66}</string> </property> <property name="text"> <string>K1ABC</string> </property> <property name="alignment"> <set>Qt::AlignCenter</set> </property> </widget> </widget> <resources/> </ui> K1ABC Qt::AlignCenter 80 20 QLabel{background-color: #ff6666} K1ABC Qt::AlignCenter 80 20 QLabel{background-color: white}<?xml version="1.0" encoding="UTF-8"?> <ui version="4.0"> <widget name="__qt_fake_top_level"> <widget class="QLabel" name="labCQ"> <property name="geometry"> <rect> <x>12</x> <y>32</y> <width>302</width> <height>25</height> </rect> </property> <property name="minimumSize"> <size> <width>80</width> <height>20</height> </size> </property> <property name="styleSheet"> <string notr="true">QLabel{background-color: #66ff66}</string> </property> <property name="text"> <string>K1ABC</string> </property> <property name="alignment"> <set>Qt::AlignCenter</set> </property> </widget> </widget> <resources/> </ui> K1ABC Qt::AlignCenter 140 0 Directed Messages Background Selected Row Background Table Background Qt::Vertical 20 40 Messages 9 9 QFrame::NoFrame QFrame::Plain 0 true 0 0 233 253 0 0 0 0 Qt::Vertical 20 40 Font Font Foreground Color Transmitted: true 80 20 QLabel{background-color: #ffeaa7} K1ABC Qt::AlignCenter Qt::Vertical QSizePolicy::Minimum 20 20 Received: true 140 0 Textbox Background Color Foreground Color QLabel{background-color: #ffeaa7} K1ABC Qt::AlignCenter QLabel{background-color: #ffeaa7} K1ABC Qt::AlignCenter Qt::Vertical QSizePolicy::Minimum 20 20 Composition 9 9 QFrame::NoFrame QFrame::Plain 0 true 0 0 277 93 0 0 0 0 Qt::Vertical 20 40 true 80 20 QLabel{background-color: #FFF} K1ABC Qt::AlignCenter Textbox Background Color Foreground Color Font 0 0 false 0 0 100 30 false false false Message generation for type 2 compound callsign holders: Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter type_2_msg_gen_combo_box false false <html><head/><body>Type 2 compound callsigns are those with prefixes or suffixes not included in the allowed shortlist (See Help->Add-on prefixes and suffixes).This option determines which generated messages should contain your full type 2 compound call sign rather than your base callsign. It only applies if you have a type 2 compound callsign.This option controls the way the messages that are used to answer CQ calls are generated. Generated messages 6 (CQ) and 5 (73) will always contain your full callsign. The JT65 and JT9 protocols allow for some standard messages with your full call at the expense of another piece of information such as the DX call or your locator.Choosing message 1 omits the DX callsign which may be an issue when replying to CQ calls. Choosing message 3 also omits the DX callsign and many versions of this and other software will not extract the report. Choosing neither means that your full callsign only goes in your message 5 (73) so your QSO partner may log the wrong callsign.None of these options are perfect, message 3 is usually best but be aware your QSO partner may not log the report you send them.</body></html> 1 Full call in Tx1 Full call in Tx3 Full call in Tx5 only false Miscellaneous Degrade S/N of .wav file: sbDegrade For offline sensitivity tests dB 1 1.000000000000000 Receiver bandwidth: sbBandwidth For offline sensitivity tests Hz 6000 100 2500 <html><head/><body>Generate Tx audio with twice the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-2 before generating RF.</body></html> x 2 Tone Spacing false <html><head/><body>Generate Tx audio with four times the normal tone spacing. Intended for special LF/MF transmitters that use a divide-by-4 before generating RF.</body></html> x 4 Tone Spacing false <html><head/><body>User-selectable parameters for JT65 VHF/UHF/Microwave decoding.</body></html> JT65 VHF/UHF/Microwave decoding parameters Random erasure patterns: sbNtrials <html><head/><body>Maximum number of erasure patterns for stochastic soft-decision Reed Solomon decoder is 10^(n/2).</body></html> 0 12 6 Aggressive decoding level: sbAggressive <html><head/><body>Higher levels will increase the probability of decoding, but will also increase probability of a false decode.</body></html> 10 Two-pass decoding true Qt::Vertical 0 0 false 0 50 FT8 DXpedition mode 9 10 231 31 Fox is the DXpedition station Fox Everybody else is a Hound Hound Discard or apply configuration changes including resetting the radio interface and applying any soundcard changes Qt::Horizontal QDialogButtonBox::Cancel|QDialogButtonBox::Ok configuration_tabs use_dynamic_grid type_2_msg_gen_combo_box monitor_last_used_check_box quick_call_check_box CW_id_after_73_check_box enable_VHF_features_check_box single_decode_check_box decode_at_52s_check_box CW_id_interval_spin_box rig_combo_box CAT_poll_interval_spin_box CAT_port_combo_box CAT_7_bit_radio_button CAT_8_bit_radio_button CAT_one_stop_bit_radio_button CAT_two_stop_bit_radio_button CAT_handshake_none_radio_button CAT_handshake_xon_radio_button CAT_handshake_hardware_radio_button force_DTR_combo_box force_RTS_combo_box PTT_VOX_radio_button PTT_CAT_radio_button PTT_DTR_radio_button PTT_RTS_radio_button PTT_port_combo_box TX_source_data_radio_button TX_source_mic_radio_button mode_none_radio_button mode_USB_radio_button mode_data_radio_button split_none_radio_button split_rig_radio_button split_emulate_radio_button test_CAT_push_button test_PTT_push_button sound_input_combo_box sound_input_channel_combo_box sound_output_combo_box sound_output_channel_combo_box save_path_select_push_button azel_path_select_push_button checkBoxPwrBandTxMemory checkBoxPwrBandTuneMemory add_macro_line_edit add_macro_push_button delete_macro_push_button macros_list_view prompt_to_log_check_box udp_server_line_edit udp_server_port_spin_box accept_udp_requests_check_box udpWindowToFront udpWindowRestore calibration_slope_ppm_spin_box calibration_intercept_spin_box frequencies_table_view stations_table_view sbNtrials sbAggressive cbTwoPass sbDegrade sbBandwidth cbx2ToneSpacing cbx4ToneSpacing configuration_dialog_button_box accepted() configuration_dialog accept() 281 488 157 274 configuration_dialog_button_box rejected() configuration_dialog reject() 349 488 286 274 add_macro_push_button clicked() add_macro_line_edit setFocus() 72 42 43 42 add_macro_line_edit returnPressed() add_macro_push_button setFocus() 43 42 72 42