From 080961d211ec5cdce81f9e92ed78b2c936d0917f Mon Sep 17 00:00:00 2001 From: tb14 Date: Fri, 4 Nov 2022 15:34:58 -0500 Subject: [PATCH] Testing vara setup --- AmRRON-Vara-setup.sh | 261 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) create mode 100644 AmRRON-Vara-setup.sh diff --git a/AmRRON-Vara-setup.sh b/AmRRON-Vara-setup.sh new file mode 100644 index 0000000..9b64b74 --- /dev/null +++ b/AmRRON-Vara-setup.sh @@ -0,0 +1,261 @@ +#!/bin/bash + ################################################################################ + ################################################################################ + ####################### AmRRON Vara Setup ######################### + ####################### Created by TB-14 ######################### + ####################### 04 NOV 2022 ######################### + ################################################################################ + ################################################################################ + + +### This script will perform basic setup for VARA. +### Tested on Mint 21 +### Using guidance and tools from TK-05 and ptitSeb, Box86, and KI7POL + +function set_screen_size() { +screen_size=$(xdpyinfo | grep dimensions | \ +sed -r 's/^[^0-9]*([0-9]+x[0-9]+).*$/\1/' | sed s/x/" "/ || echo 800 480) +width=$(echo $screen_size | awk '{print $1}') +height=$(echo $screen_size | awk '{print $2}') +#xdpyinfo | grep 'dimensions:' +# Divide by two so the dialogs take up half of the screen, which looks nice. +rows=$(( height / 2 )) +columns=$(( width / 2 )) +# Unless the screen is tiny +rows=$(( rows < 400 ? 400 : rows )) +columns=$(( columns < 700 ? 700 : columns )) +c="--width=${columns}" +r="--height=${rows}" +} + +function determine_os() { +#Deterimine computer type. +function noOS_Support() { + yad --image=$DIR/images/corps-icon.png --center --no-buttons \ + --title "INVALID OS DETECTED" \ + --text "A valid OS was not detected.\n\nThis installer was designed for \ +Debian based distros; specifically Raspbian Stretch, Linux Mint 18.3 / 19.1 and Ubuntu 18.04." \ + ${r} ${c} + exit 1 + +} + +function maybeOS_Support() { + if (yad --image=$DIR/images/corps-icon.png --center \ + --title "Not Supported OS" \ + --text "Your OS may be compatible with this installer but has not been \ +tested.\n\nThis installer has been tested on Raspberry Pi OS Buster and Bullseye \ +(32bit and 64bit), Linux Mint 20.3 and 21. It should work on most Debian 10 / 11 based distros. \n\nWould you like to continue anyway?" ${r} ${c}) then + yad --image=$DIR/images/corps-icon.png --center \ + --title "Not Supported OS" \ + --text "::: Did not detect perfectly supported OS but,\n\n \ +::: Continuing installation at user's own risk..." ${r} ${c} || + { echo "exiting"; exit 1; } + else + yad --image=$DIR/images/corps-icon.png --center \ + --title "Not Supported OS" \ + --text "::: Exiting due to unsupported OS" ${r} ${c} + exit 1 + fi +} + +# Determine location user is running script from. +SOURCE="${BASH_SOURCE[0]}" + # While $SOURCE is a symlink, resolve it + while [ -h "$SOURCE" ]; do + DIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )" + SOURCE="$( readlink "$SOURCE" )" + # If $SOURCE was a relative symlink (so no "/" as prefix, need to + #resolve it relative to the symlink base directory + [[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" + done + DIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )" + #echo "$DIR" + + + +# Compatibility check for OS + # if lsb_release command is on their system + if hash lsb_release 2>/dev/null; then + + PLAT=$(lsb_release -si) + OSCN=$(lsb_release -sc) # We want this to be trusty xenial bionic cosmic disco; jessie strech buster; sara serena sonya sylvia tara tessa tina + + else # else get info from os-release + + PLAT=$(grep "^NAME" /etc/os-release | awk -F "=" '{print $2}' | tr -d '"' \ + | awk '{print $1}') + VER=$(grep "VERSION_ID" /etc/os-release | awk -F "=" '{print $2}' | tr -d '"') + declare -A VER_MAP=(["11"]="bullseye" ["10"]="buster" ["9"]="stretch" ["8"]="jessie" ["16.04"]="xenial" \ + ["14.04"]="trusty" ["18.04"]="bionic" ["18.10"]="cosmic" ["19.04"]="disco" ["19.10"]="eoan" ["20.04"]="focal" ["18"]="sara" ["18.1"]="serena" \ + ["18.2"]="sonya" ["18.3"]="sylvia" ["19"]="tara" ["19.1"]="tessa" ["19.2"]="tina" ["19.3"]="tricia" ["20"]="ulyana" ["20.3"]="una" ["21"]="vanessa" ) + OSCN=${VER_MAP["${VER}"]} + + fi + + case ${PLAT} in + Raspbian|Debian|Linuxmint) + case ${OSCN} in + buster|bullseye|una|vanessa) + ;; + *) + maybeOS_Support + ;; + esac + ;; + *) + noOS_Support + ;; + esac +} + +#create a finish trap +function finish { + if [[ -f /tmp/vara-failures ]]; then +rm /tmp/vara-failures +fi +} +trap finish EXIT + +### clean up from previous attemps + +if [[ -f /tmp/vara_failures ]]; then + echo "/tmp/failures file previously exists. Moving to /tmp/failures.bak" + mv /tmp/vara_failures /tmp/vara_failures.bak +fi + +# Create a error function to make life easier later on +function errors() { +echo "${ERRCODE}" >> /tmp/vara_failures + } + +function install_vara () { + +if [[ OSCN = vanessa ]]; then + install install_vara_mint21 +elif [[ OSCN = vanessa ]]; then + install install_vara_mint20.3 +elif [[ OSCN = bullseye ]] && [[ $(uname -m) = aarch64 ]]; then +install install_vara_pi64 +elif [[ OSCN = bullseye ]] && [[ $(uname -m) = armv7l ]]; then +install install_vara_pi_bullseye +elif [[ OSCN = buster ]]; then +install install_vara_pi_buster +fi + +} + +function install_vara_mint21() { + +echo "Wine needs to be installed in order to run VARA on Linux. Would you like me to attempt to do this now?" | yad \ +--text-info --image=$DIR/images/corps-icon.png --center --wrap \ +--button="No:0" --button="Install Wine:2" \ +--title "Wine Installation." \ +${r} ${c} +rc=$? +if [[ $rc -eq 2 ]]; then + echo "Installing Wine" | sudo apt-get install -y wine || + { ERRCODE="Failed to install wine"; errors; } +else +elif [[ $rc == 0 ]]; then + yad --image=$DIR/images/corps-icon.png --center --button="gtk-ok:0" --title "Exit Selected" --text "Exiting installer now" ${r} ${c} + exit 1 +fi + +echo "Now we will install the dependencies required" | yad \ +--text-info --image=$DIR/images/corps-icon.png --center --wrap \ +--button="No:0" --button="Install Dependencies:2" \ +--title "Dependency Installation." \ +${r} ${c} +rc=$? +if [[ $rc -eq 2 ]]; then + echo "Installing Dependencies" | sudo dpkg --add-architecture i386 && sudo apt update && sudo apt install libc6-i386 && sudo apt install libasound2-plugins:i386 && sudo apt upgrade || + { ERRCODE="Failed to install dependencies"; errors; } +else +elif [[ $rc == 0 ]]; then + yad --image=$DIR/images/corps-icon.png --center --button="gtk-ok:0" --title "Exit Selected" --text "Exiting installer now" ${r} ${c} + exit 1 +fi + + +echo "Now we will download, modify, and run the WheezyE installer script." | yad \ +--text-info --image=$DIR/images/corps-icon.png --center --wrap \ +--button="No:0" --button="Install WheezyE script:2" \ +--title "WheezyE Vara Installation." \ +${r} ${c} +rc=$? +if [[ $rc -eq 2 ]]; then + echo "Downloading script, modifing for Pulse Audio and running." | wget -P $DIR/Files -N https://raw.githubusercontent.com/WheezyE/Winelink/main/docs/experiments/x86-64_Linux_distros/Debian-Ubuntu_x64.sh && sed -i 's/alsa/pulse/g' $DIR/Files/Debian-Ubuntu_x64.sh || + { ERRCODE="Failed to pull WheezyE Debian script and modify for pulse audio"; errors; } +elif [[ $rc == 0 ]]; then + yad --image=$DIR/images/corps-icon.png --center --button="gtk-ok:0" --title "Exit Selected" --text "Exiting installer now" ${r} ${c} + exit 1 +fi + +bash $DIR/Files/Debian-Ubuntu_x64.sh + +} + + +function install_vara_pi64() { + +if [[ OSCN = Linuxmint ]]; then +echo "Wine needs to be installed in order to run VARA on Linux. Would you like me to attempt to do this now?" | yad \ +--text-info --image=$DIR/images/corps-icon.png --center --wrap \ +--button="No:0" --button="Install Wine:2" \ +--title "Wine Installation." \ +${r} ${c} +rc=$? +if [[ $rc -eq 2 ]]; then + echo "Installing Wine" | sudo apt-get install -y wine || + { ERRCODE="Failed to install wine"; errors; } +else +elif [[ $rc == 0 ]]; then + yad --image=$DIR/images/corps-icon.png --center --button="gtk-ok:0" --title "Exit Selected" --text "Exiting installer now" ${r} ${c} + exit 1 +fi +fi + + +} + + +function failure_handling() { + +FAIL=$(cat /tmp/failures) || echo "No failures recorded" + + +if [[ -f /tmp/failures ]]; then +yad --image=$DIR/images/corps-icon.png --center --button="Save Log:2" --button="gtk-ok:0" \ +--title "Failures" \ +--text "The following failures occured during installation:\n\n$FAIL" ${r} ${c} exit=$? +if [[ $? == 2 ]]; then +ERRORLOG=$HOME/AmRRON-Vara-Setup-failures +if [[ -e $ERRORLOG.log ]]; then + i=1 + while [[ -e $ERRORLOG-$i.log ]] ; do + let i++ + done + ERRORLOG=$ERRORLOG-$i +fi +cp /tmp/failures $ERRORLOG.log +yad --center --button="gtk-ok:0" \ +--image=$DIR/images/corps-icon.png \ +--title "Failure Log Saved" \ +--text "A copy of the failure log was saved at $ERRORLOG.log" ${r} ${c} +fi + +fi + +} + + + + +## Run the script + +set_screen_size +determine_os +install_vara +failure_handling +