mirror of
https://github.com/thetechprepper/emcomm-tools-os-community.git
synced 2026-09-17 15:41:44 -04:00
Merge pull request #40 from thetechprepper/rigcontrol/yaesu-ftx-1
Merge rigcontrol/yaes-ftx-1 to release/r5
This commit is contained in:
thetechprepper
@@ -0,0 +1,38 @@
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 21 May 2025
|
||||
# Updated : 16 May 2025
|
||||
# Purpose : udev rules for the Yaesu FTX-1 via USB-C
|
||||
#
|
||||
# Preconditions:
|
||||
# 1. Yaesu FTX-1 is selected via et-radio
|
||||
# 2. Yaesu FTX-1 is connected via USB-C cable
|
||||
#
|
||||
# Postconditions:
|
||||
# 1. /dev/et-cat created
|
||||
# 2. /dev/et-audio created
|
||||
# 3. rigctld is started
|
||||
#
|
||||
# Note: As of 05/21/25 Yaesu has not published their CAT control command specification. This is a
|
||||
# temporary integration that does not include CAT control support. It will only key the PTT
|
||||
# and provide audio in/out. You MUST set the frequency and mode yourself.
|
||||
|
||||
# Special rule to ensure that the second serial interface (/dev/ttyUSB5) is tagged as ET_DEVICE=FTX-1 so
|
||||
# that it can be used in the next CAT control rule.
|
||||
KERNEL=="ttyUSB[0-9]*", SUBSYSTEM=="tty", PROGRAM="/opt/emcomm-tools/sbin/udev-tester.sh yaesu-ftx1", \
|
||||
ATTRS{bInterfaceNumber}=="01", \
|
||||
ENV{ET_DEVICE}="FTX-1"
|
||||
|
||||
# CAT control device will only match if PROGRAM above matches (exit status=0)
|
||||
SUBSYSTEM=="tty", ENV{ET_DEVICE}=="FTX-1", \
|
||||
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea70",\
|
||||
ACTION=="add", \
|
||||
ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
|
||||
RUN+="/usr/bin/systemctl start rigctld"
|
||||
|
||||
# Audio device will only match if PROGRAM above matches (exit status=0)
|
||||
SUBSYSTEM=="sound", ATTRS{idVendor}=="0d8c", ATTRS{idProduct}=="0016", \
|
||||
PROGRAM="/opt/emcomm-tools/sbin/udev-tester.sh yaesu-ftx1", \
|
||||
ACTION=="add", \
|
||||
ENV{ET_DEVICE}="FTX-1", \
|
||||
ATTR{id}="ET_AUDIO", \
|
||||
ENV{ET_SUBDEVICE}="AUDIO", GROUP="audio", MODE="0660", SYMLINK+="et-audio"
|
||||
@@ -0,0 +1,7 @@
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 31 May 2025
|
||||
# Updated : 4 June 2025
|
||||
# Purpose : Empty udev rule to prevent the BRLTTY subsystem from
|
||||
# invoking /lib/udev/rules.d/85-brltty.rules. These rules
|
||||
# hijack some USB devices used by ETC operators. The Bionics
|
||||
# MicroFox-50 was one of these hijacked devices.
|
||||
@@ -2,7 +2,7 @@
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 31 October 2024
|
||||
# Updated : 11 November 2024
|
||||
# Updated : 31 May 2024
|
||||
# Purpose : Configures ET audio device with sane defaults
|
||||
#
|
||||
# Preconditions
|
||||
@@ -85,6 +85,18 @@ update-config () {
|
||||
|
||||
et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
|
||||
;;
|
||||
"FTX-1")
|
||||
# Unmute Speaker a set volume. Adjust if remote station can't decode you. Your TX controls.
|
||||
amixer -q -c ${AUDIO_CARD} sset Speaker Playback Switch 42% unmute
|
||||
# Unmute Mic
|
||||
amixer -q -c ${AUDIO_CARD} sset Mic Playback Switch 52% unmute
|
||||
# Set "L/R Capture" to 19. Adjust if you can't decode received audio. Your RX controls.
|
||||
amixer -q -c ${AUDIO_CARD} sset Mic Capture Switch 31% unmute
|
||||
# Disable Auto Gain Control
|
||||
amixer -q -c ${AUDIO_CARD} sset 'Auto Gain Control' mute
|
||||
|
||||
et-log "Applied amixer settings for ${ET_DEVICE_NAME}"
|
||||
;;
|
||||
*)
|
||||
et-log "No ALSA configuration specified for this ET_DEVICE."
|
||||
;;
|
||||
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"id": "yaesu-ftx1",
|
||||
"vendor": "Yaesu",
|
||||
"model": "FTX-1 (No CAT)",
|
||||
"rigctrl": {
|
||||
"id": "1",
|
||||
"baud": "38400",
|
||||
"ptt": "RTS",
|
||||
"pttOnly": "true"
|
||||
},
|
||||
"notes": [
|
||||
"Tune radio to desired frequency.",
|
||||
"Long press [MODE], then set accordingly for HF or VHF/UHF.",
|
||||
"For HF operation:",
|
||||
"- First, select 'DATA-U'.",
|
||||
"- Then, long press 'PRESET' and select 'FT8'.",
|
||||
"- The 'PRESET' button should be highlighted in blue.",
|
||||
"For VHF/UHF FM operation:",
|
||||
"- First, select 'FM'.",
|
||||
"- Then, long press 'PRESET' and select 'FT8'.",
|
||||
"- The 'PRESET' button should be highlighted in blue."
|
||||
],
|
||||
"fieldNotes": [
|
||||
]
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
#!/bin/bash
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 11 October 2024
|
||||
# Updated : 8 December 2024
|
||||
# Updated : 21 May 2025
|
||||
# Purpose : Perform tests that can be used by the udev subsystem to aid
|
||||
# in rule development. This is intended to by used with the PROGRAM
|
||||
# directive inside of a udev rule.
|
||||
@@ -13,6 +13,20 @@
|
||||
ET_HOME=/opt/emcomm-tools
|
||||
ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
|
||||
|
||||
# Exit with a 0 exit status if, and only if, the currently selected radio is
|
||||
# a Yaesu FTX-1.
|
||||
test_yaesu_ftx1() {
|
||||
if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
|
||||
ID=$(cat "${ET_HOME}/conf/radios.d/active-radio.json" | jq -r .id)
|
||||
|
||||
if [[ "$ID" == "yaesu-ftx1" ]]; then
|
||||
exit 0
|
||||
fi
|
||||
fi
|
||||
|
||||
exit 1
|
||||
}
|
||||
|
||||
# Exit with a 0 exit status if, and only if, the currently selected radio is
|
||||
# a Yaesu FT-891.
|
||||
test_yaesu_ft891() {
|
||||
@@ -82,6 +96,9 @@ if [ $# -ne 1 ]; then
|
||||
fi
|
||||
|
||||
case $1 in
|
||||
yaesu-ftx1)
|
||||
test_yaesu_ftx1
|
||||
;;
|
||||
yaesu-ft891)
|
||||
test_yaesu_ft891
|
||||
;;
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
#
|
||||
# Author : Gaston Gonzalez
|
||||
# Date : 9 October 2024
|
||||
# Updated : 28 October 2024
|
||||
# Updated : 31 May 2025
|
||||
# Purpose : Wrapper startup/shutdown script around systemd/rigctld
|
||||
|
||||
ET_HOME=/opt/emcomm-tools
|
||||
@@ -41,8 +41,19 @@ start() {
|
||||
ID=$(cat ${ET_HOME}/conf/radios.d/active-radio.json | jq -r .rigctrl.id)
|
||||
PTT=$(cat ${ET_HOME}/conf/radios.d/active-radio.json | jq -r .rigctrl.ptt)
|
||||
|
||||
CMD="rigctld -m ${ID} -P ${PTT} "
|
||||
et-log "Starting rigctld in VOX mode with: ${CMD}"
|
||||
# Special case for select radios that only need to key the PTT, but do
|
||||
# do not have CAT control support. This edge case was added for radios
|
||||
# like the Yaesu FTX-1 Field before Yaesu published their CAT commands.
|
||||
PTT_ONLY=$(cat ${ET_HOME}/conf/radios.d/active-radio.json | jq -r .rigctrl.pttOnly)
|
||||
|
||||
if [ "${PTT_ONLY}" = "true" ]; then
|
||||
CMD="rigctld -m ${ID} -p ${CAT_DEVICE} -P ${PTT} "
|
||||
et-log "Starting rigctld in PTT-only mode with: ${CMD}"
|
||||
else
|
||||
CMD="rigctld -m ${ID} -P ${PTT} "
|
||||
et-log "Starting rigctld in VOX mode with: ${CMD}"
|
||||
fi
|
||||
|
||||
$CMD
|
||||
exit 0
|
||||
fi
|
||||
|
||||
Reference in New Issue
Block a user