Merging audio/digirig-no-cat branch

overlay/etc/skel/.conkyrc

@@ -34,7 +34,7 @@ ${font DejaVu Sans:bold:size=10}${color #8d5133}${alignc}INTERFACES
 ${font DejaVu Sans Mono:size=11}${color yellow}Radio: ${execpi 10 et-system-info active-radio}
 CAT  : ${execpi 10 et-system-info et-cat}
 GPS  : ${execpi 10 et-system-info et-gps}
-Audio: ${execpi 10 et-system-info et-audio} ${execpi 10 et-system-info et-audio-card}
+Audio: ${execpi 10 et-system-info et-audio}
 
 ${font DejaVu Sans:bold:size=9}${color #805f4f}${alignc}${execp /opt/emcomm-tools/bin/et-system-info release}
 ]];

overlay/opt/emcomm-tools/bin/et-js8call

@@ -2,13 +2,16 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 24 October 2024
+# Updated : 25 October 2024
 # Purpose : Wrapper script for starting JS8Call with PnP support
 #
 # Preconditions
-# 1. Support radio and audio interface are connected and properly detected
+# 1. Supported radio and audio interface are connected and properly detected
 #
 # Postconditions
-# 1. JS8Call is started with audio settings updated
+# 1. JS8Call audio settings updated
+# 2. JS8Call rig settings updated
+# 3. JS8Call started
 
 usage() {
   echo "usage: $(basename $0) <command>"
@@ -21,6 +24,13 @@ if [ $# -ne 1 ]; then
   exit 1
 fi
 
+notify_user() {
+  notify-send \
+   -t 10000 \
+   --app-name="EmComm Tools" \
+   "$1"
+}
+
 start() {
   update-config && /usr/bin/js8call &
 }
@@ -28,6 +38,20 @@ start() {
 update-config () {
 
     JS8CALL_CONF_FILE="${HOME}/.config/JS8Call.ini"
+    JS8CALL_TEMPLATE_CONF_FILE=${ET_HOME}/conf/template.d/js8call/JS8Call.rigctl.ini
+
+    # Special case for the DigiRig Mobile when connected to a radio that does 
+    # not support CAT control.
+    if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
+      RIG_ID=$(cat "${ET_HOME}/conf/radios.d/active-radio.json" | jq -r .rigctrl.id)
+
+      if [ "${RIG_ID}" = "6" ]; then
+        JS8CALL_TEMPLATE_CONF_FILE=${ET_HOME}/conf/template.d/js8call/JS8Call.no-rigctl.ini
+      fi
+    fi
+
+    cp ${JS8CALL_TEMPLATE_CONF_FILE}  ${JS8CALL_CONF_FILE}
+    et-log "Replaced JS8Call configuration with template: ${JS8CALL_TEMPLATE_CONF_FILE}"
 
     # 1. Check if the symlink was created by the udev rules
     if [ -e /dev/et-audio ]; then
@@ -59,12 +83,15 @@ update-config () {
 
        else
          et-log "No ET_AUDIO device detected."
+         notify_user "Can't start JS8Call. No ET_AUDIO device detected."
          exit 1
        fi
     else
       et-log "No ET_AUDIO device plugged in."
+      notify_user "Can't start JS8Call. No supported audio device plugged in."
       exit 1
     fi
+
 }
 
 case $1 in

overlay/opt/emcomm-tools/bin/et-radio

@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 11 October 2024
-# Updated  : 24 October 2024
+# Updated  : 25 October 2024
 # Purpose  : A script for managaing plug-and-play radios
 set -e
 
@@ -23,14 +23,14 @@ ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
 case $1 in
   list)
 
-    printf "%-20s %-10s %-10s\n" "Radio ID" "Vendor" "Model"
+    printf "%-24s %-10s %-10s\n" "Radio ID" "Vendor" "Model"
 
     find ${ET_HOME}/conf/radios.d -type f -name \*.json | sort -n | while read radio; do
       ID=$(cat $radio | jq -r .id)
       VENDOR=$(cat $radio | jq -r .vendor)
       MODEL=$(cat $radio | jq -r .model)
 
-      printf "%-20s %-10s %-10s\n" $ID "$VENDOR" "$MODEL"
+      printf "%-24s %-10s %-10s\n" $ID "$VENDOR" "$MODEL"
     done
 
     ;;
@@ -48,7 +48,7 @@ case $1 in
         options+=("$ID" "$VENDOR $MODEL")
     done < <(find $ET_HOME/conf/radios.d -type f | sort)
 
-    SELECTED_RADIO=$(dialog --clear --menu "Select a radio:" 15 50 10 "${options[@]}" 3>&1 1>&2 2>&3)
+    SELECTED_RADIO=$(dialog --clear --menu "Select a radio:" 20 60 10 "${options[@]}" 3>&1 1>&2 2>&3)
     exit_status=$?
 
     # Reset terminal to its original state

overlay/opt/emcomm-tools/bin/et-system-info

@@ -101,7 +101,7 @@ case $1 in
           echo "Connected. Can't access VFO"; 
         fi
       else
-        echo "Connected. rigctld not running"
+        echo "Connected. No rig control"
       fi
     else
       echo "Not connected"; 

overlay/opt/emcomm-tools/conf/radios.d/digirig-lite.json

@@ -1,7 +1,7 @@
 {
-  "id": "generic-vox",
-  "vendor": "Generic",
-  "model": "VOX",
+  "id": "digirig-lite",
+  "vendor": "DigiRig",
+  "model": "Lite",
   "rigctrl": {
     "id": "1",
     "ptt": "NONE"

overlay/opt/emcomm-tools/conf/radios.d/digirig-mobile-no-cat.json

@@ -0,0 +1,14 @@
+{
+  "id": "digirig-mobile-no-cat",
+  "vendor": "DigiRig",
+  "model": "Mobile (No CAT)",
+  "rigctrl": {
+    "id": "6",
+    "ptt": "RTS"
+  },
+  "notes": [
+    "Set your VFO manually",
+    "Adjust your volume, RF gain and squelch manually",
+    "This mode uses the RTS signal to trigger the PTT"
+  ]
+}

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft818nd.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft818nd",
   "vendor": "Yaesu",
-  "model": "FT-818ND",
+  "model": "FT-818ND (DigiRig)",
   "rigctrl": {
     "id": "1041",
     "baud": "38400",

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft857d.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft857d",
   "vendor": "Yaesu",
-  "model": "FT-857D",
+  "model": "FT-857D (DigiRig)",
   "rigctrl": {
     "id": "1022",
     "baud": "38400",

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft897d.json

@@ -1,7 +1,7 @@
 {
   "id": "yaesu-ft897d",
   "vendor": "Yaesu",
-  "model": "FT-897D",
+  "model": "FT-897D (DigiRig)",
   "rigctrl": {
     "id": "1043",
     "baud": "38400",

overlay/opt/emcomm-tools/conf/template.d/js8call/JS8Call.no-rigctl.ini

@@ -0,0 +1,27 @@
+[Configuration]
+AcceptTCPRequests=true
+AutoGrid=true
+AutoreplyConfirmation=false
+AutoreplyOnAtStartup=true
+CATNetworkPort=localhost:4532
+CheckForUpdates=false
+HeartbeatAckSNR=true
+HideControls=true
+Miles=true
+MyCall=N0CALL
+MyGrid=DM33
+MyGroups=@@TTP,@@TTPNET
+Polling=1
+PSKReporter=false
+PTTMethod=@Variant(\0\0\0\x7f\0\0\0\x1eTransceiverFactory::PTTMethod\0\0\0\0\xfPTT_method_RTS\0)
+PTTport=/dev/et-cat
+SubMode=0
+SubModeHB=true
+SubModeHBAck=true
+Rig=None
+SpotToAPRS=false
+TCPEnabled=true
+TCPMaxConnections=3
+TCPServer=127.0.0.1
+TCPServerPort=2442
+TxIdleWatchdog=0

overlay/opt/emcomm-tools/conf/template.d/js8call/JS8Call.rigctl.ini

@@ -0,0 +1,27 @@
+[Configuration]
+AcceptTCPRequests=true
+AutoGrid=true
+AutoreplyConfirmation=false
+AutoreplyOnAtStartup=true
+CATNetworkPort=localhost:4532
+CheckForUpdates=false
+HeartbeatAckSNR=true
+HideControls=true
+Miles=true
+MyCall=N0CALL
+MyGrid=DM33
+MyGroups=@@TTP,@@TTPNET
+Polling=1
+PSKReporter=false
+PTTMethod=@Variant(\0\0\0\x7f\0\0\0\x1eTransceiverFactory::PTTMethod\0\0\0\0\xfPTT_method_CAT\0)
+PTTport=localhost:4532
+SubMode=0
+SubModeHB=true
+SubModeHBAck=true
+Rig=Hamlib NET rigctl
+SpotToAPRS=false
+TCPEnabled=true
+TCPMaxConnections=3
+TCPServer=127.0.0.1
+TCPServerPort=2442
+TxIdleWatchdog=0

overlay/opt/emcomm-tools/sbin/wrapper-rigctld.sh

@@ -2,7 +2,7 @@
 #
 # Author  : Gaston Gonzalez
 # Date    : 9 October 2024
-# Updated : 24 October 2024
+# Updated : 25 October 2024
 # Purpose : Wrapper startup/shutdown script around systemd/rigctld
 
 ET_HOME=/opt/emcomm-tools
@@ -29,19 +29,30 @@ do_full_auto() {
 
 start() {
 
-  # Special case for VOX devices like the DigiRig Lite.
+  # Special cases for the DigiRig Lite and DigiRig Mobile with no CAT. 
   if [ -L "${ET_HOME}/conf/radios.d/active-radio.json" ]; then
-    CUR_RADIO=$(cat "${ET_HOME}/conf/radios.d/active-radio.json" | jq -r .model)
-    if [ "${CUR_RADIO}" = "VOX" ]; then
+    RIG_ID=$(cat "${ET_HOME}/conf/radios.d/active-radio.json" | jq -r .rigctrl.id)
+
+    # All VOX devices use the dummy mode provided by Hamlib. This helps maintain 
+    # a cleaner interface by leveraging rigctl NET in applications.
+    if [ "${RIG_ID}" = "1" ]; then
       et-log "Starting dummy rigctld service for VOX device."
 
       ID=$(cat ${ET_HOME}/conf/radios.d/active-radio.json | jq -r .rigctrl.id)
       PTT=$(cat ${ET_HOME}/conf/radios.d/active-radio.json | jq -r .rigctrl.ptt)
 
       CMD="rigctld -m ${ID} -P ${PTT} "
-      et-log "Starting rigctld with: ${CMD}"
+      et-log "Starting rigctld in VOX mode with: ${CMD}"
       $CMD
+      exit 0
+    fi
 
+    # We can't use rigctld in dummy mode like we did with the DigiRig Lite as the Hamlib dummy
+    # rigs (1 and 6) do not honor the -P flag. Passing -P RTS is ignored. I need to create a custom rig for
+    # the DigiRig Mobile for radios that do not support CAT control, but haver their PTT triggered via 
+    # the RTS signal.
+    if [ "${RIG_ID}" = "6" ]; then
+      et-log "Skipping rigctld startup for DigiRig Mobile since radio does not support CAT control."
       exit 0
     fi
   fi