PnP - Added initial support for the Yaesu FT-818ND

overlay/etc/udev/rules.d/90-et-digirig-mobile.rules

@@ -1,5 +1,6 @@
 # Author   : Gaston Gonzalez
 # Date     : 30 September 2024
+# Updated  : 11 October 2024
 # Purpose  : udev rules for the DigiRig Mobile v1.9 
 #
 # Preconditions:
@@ -8,6 +9,7 @@
 #
 # Postconditions:
 # 1. /dev/et-cat created
+# 2. rigctld is started
 # 
 
 # The IC-7200 uses the same chipsset. In order to avoid incorrect detection, we will check
@@ -16,7 +18,8 @@
 SUBSYSTEM=="tty", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", ENV{ET_DEVICE}=="", \
     ACTION=="add", \
     ENV{SYSTEMD_WANTS}="", \
-    ENV{ET_DEVICE}="DIGIRIG_MOBILE", ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat"
+    ENV{ET_DEVICE}="DIGIRIG_MOBILE", ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
+    RUN+="/usr/bin/systemctl start rigctld"
 
 # TODO: Add rules for earlier 1.9 release
 # TODO: Add rules for sound card

overlay/opt/emcomm-tools/conf/radios.d/yaesu-ft818nd.json

@@ -0,0 +1,23 @@
+{
+  "id": "yaesu-ft818nd",
+  "vendor": "Yaesu",
+  "model": "FT-818ND",
+  "rigctrl": {
+    "id": "1041",
+    "baud": "38400",
+    "ptt": "RTS"
+  },
+  "notes": [
+    "Menu 007 ANTENNA = REAR",
+    "Menu 014 CAT RATE = 38400",
+    "Menu 024 DIG DISP = 0 Hz",
+    "Menu 025 DIG MIC = 75",
+    "Menu 026 DIG MODE = USER-U",
+    "Menu 027 DIG SHIFT = 0 Hz",
+    "Menu 039 PKT MIC = 50",
+    "Menu 040 PKT RATE = 1200",
+    "Set AGCfast",
+    "For VHF/UHF packet, set mode = PKT; Menu 045 = SQL",
+    "For HF, set mode = DIGI; Menu 045 = RF GAIN"
+  ]
+}