Merging misc/radio-support

overlay/etc/udev/rules.d/88-et-qrplabs-qmx.rules

@@ -1,5 +1,6 @@
 # Author   : Gaston Gonzalez
 # Date     : 12 October 2024
+# Updated  : 10 November 2024
 # Purpose  : udev rules for the QRP Labs QMX 
 #
 # Preconditions:
@@ -7,7 +8,8 @@
 #
 # Postconditions:
 # 1. /dev/et-cat created
-# 2. rigctld started
+# 2. /dev/et-audio created
+# 3. rigctld started
 
 # Detect ET_DEVICE early and use for rules that follow
 KERNEL=="ttyACM[0-9]*", SUBSYSTEM=="tty", ATTRS{product}=="QMX*", \
@@ -19,4 +21,7 @@ ENV{ET_DEVICE}=="QMX", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a34c", \
     ENV{ET_SUBDEVICE}="CAT", GROUP="dialout", MODE="0660", SYMLINK+="et-cat", \
     RUN+="/usr/bin/systemctl start rigctld"
 
-# TODO: Add sound card support
+SUBSYSTEM=="sound", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="a34c", ATTRS{manufacturer}=="QRP Labs", ENV{ET_DEVICE}=="", \
+    ACTION=="add", \
+    ATTR{id}="ET_AUDIO", \
+    ENV{ET_DEVICE}="QMX", ENV{ET_SUBDEVICE}="AUDIO", GROUP="audio", MODE="0660", SYMLINK+="et-audio"

overlay/opt/emcomm-tools/bin/et-radio

@@ -2,7 +2,7 @@
 #
 # Author   : Gaston Gonzalez
 # Date     : 11 October 2024
-# Updated  : 3 November 2024
+# Updated  : 10 November 2024
 # Purpose  : A script for managaing plug-and-play radios
 set -e
 
@@ -10,6 +10,11 @@ ACTIVE_RADIO="${ET_HOME}/conf/radios.d/active-radio.json"
 
 NO_RADIO_ID="no-radio"
 
+YELLOW="\033[1;33m"
+GREEN="\033[0;32m"
+RED="\033[0;31m"
+NC="\033[0m"
+
 options=()
 options+=("${NO_RADIO_ID}" "No radio")
 while IFS= read -r radio; do
@@ -44,13 +49,19 @@ if [ $exit_status -eq 0 ]; then
   MODEL=$(cat ${ACTIVE_RADIO} | jq -r .model)
 
   printf "%-20s %-10s %-10s\n" "Radio ID" "Vendor" "Model"
-  printf "%-20s %-10s %-10s\n" $ID "$VENDOR" "$MODEL"
+  printf "%-20s %-10s %-10s\n\n" $ID "$VENDOR" "$MODEL"
 
-  printf "\nConfiguration Notes\n"
+  printf "${YELLOW}RADIO CONFIGURATION NOTES\n"
   cat ${ACTIVE_RADIO} | jq -r '.notes[] | "* \(.)"'
+  echo -e "${NC}"
 
   
-  printf "\n** Plug in radio. If already connected, reconnect it.\n"
+  printf "${GREEN}REQUIRED ACTIONS\n"
+  printf "1. Apply the settings above to your radio.\n"
+  printf "2. Plug in the USB cable for your radio. If it is already connected, reconnect it.\n"
+  printf "3. Run 'et-mode' and select the desired mode of operation.\n\n"
+  printf "   Note: JS8Call does not require a mode to be selected.\n"
+  echo -e "${NC}"
 else
   echo "No radio selected."
 fi

overlay/opt/emcomm-tools/conf/radios.d/qrplabs-qmx.json

@@ -8,6 +8,6 @@
     "ptt": "RIG"
   },
   "notes": [
-    "The QMX uses the Kenwood TS-440 CAT control driver"
+    "This is device is purely plug-and-play and requires no changes."
   ]
 }

overlay/opt/emcomm-tools/conf/radios.d/xiegu-g90.json

@@ -8,6 +8,13 @@
     "ptt": "RTS"
   },
   "notes": [
+    "AGC = OFF (AGC--)",
+    "MODE = U-D",
+    "RF-GAIN = 50%",
+    "AUX IN = 10",
+    "AUX OUT = 13"
+  ],
+  "fieldNotes": [
     "Set AGC: Short press [AGC]",
     "Set Mode: Press Mode arrow keys on top of head unit ",
     "Set RF Gain: Long press [AGC]. Use VFO knob to change",